Go to homepage
€0.00*
Filter
–
Artist Palette
Artist Palette
Artist Palette / Paint palette / color mixing palette made of plastic, for mixing and deploy of your leather colours. Always have a good oversight of the different colours you use for your respective project when colouring with this paint palette. Ideal for processing various types of dye or acrylic paints used for dyeing or painting of your tooled projects. Details:- 10 round colour bowls each with Ø 3.2 cm- Total Ø: 17,3 cm- Height: 1.2 cm

€2.90*
Coloring with Eco-Flo – Book
Coloring with Eco-Flo – Book
Coloring with Eco-Flo - Book This book, written in English by Tony and Kay Laier, explains various basics of staining techniques and applications based on the Eco-Flo product range on 39 pages. Individual dyeing examples, various finishes and antique colors are explained and usage examples are described. The individual descriptions are well illustrated and partly self-explanatory. Coloring with Eco-Flo is a very good foundation for using our Eco-Flo products. The individual sections of the book are structured as follows: Workplace Preparation Brief introduction to different types of leather dyes (alcohol, oil, water-based leather dyes) and dyeing techniques Brush / dye selection and cleaning / care of these tools Colourize backgrounds Step by step instructions for colouring a tooled multi-coloured oak leaf Step by step instructions for colouring a tooled multicoloured floral pattern Step by step instructions for colouring a tooled multi-coloured image scene Dyeing / painting with acrylic paints Explanation of the different antique colours Instructions for using antique finishes Explanation of the various dye block methods and special effects Tips and usage examples for the available Eco-Flo leather finishes Explanations and examples of use for the edge paints leather care COMPATIBILITY CHART FOR ECO–FLOLINE OF DYES AND FINISHES

€24.90*
Craft Japan - Somenon (100 ml)
Craft Japan - Somenon (100 ml)
Craft Japan Somenon (Liquid Masking Tape) made of natural rubber / latex (100 ml) Excellent, water repellent masking fluid, which can be used like a masking tape for painting - In liquid form and can therefore be perfectly applied selectively with a brush. The initially white liquid hardens transparently. After hardening of the Somenon, no color penetrates through the resulting latex layer at the treated areas during dyeing (apply 1-2 times without gaps; fully hardened after 60 to 90 minutes). Subsequently, the masking layer can be peeled off without residue from the leather surface or rubbed off. Slightly darkened areas will remain on natural coloured leather once the Somenon is removed. Ideal for making multicoloured toolings. Suitable for blocking all leather colours available in our shop.

Content: 0.1 liter (€69.00* / 1 liter)

€6.90*
Craft Japan Antique Carving Dye
Craft Japan Antique Carving Dye
Craft Japan Antique Carving Dye Antique finish to emphasize the tooling in the leather.Easy to apply, fast absorbing and drying. Craft Japan Antique Carving Dye is leather dye and antique finish in one. It dyes the leather in a light hue of the chosen color - creates a strong, dark colour in the hollow of the tooling. Thus, you get a wonderful, powerful tone-on-tone contrast. Areas that are not to be coloured (blocked) must be protected with a suitable finish first (e.g., Craft Japan Leather - Finish / Glossy - Fiebing's Tan Kote, Eco-Flo Super Shene ...). Application:- Apply the Craft Japan Antique Carving Dye on a dampened sponge or cloth, apply in a circular motion and rub deep into the hollows. Please remove the excess gel with a slightly damp cloth or sponge. After drying, the workpiece must still be protected with a leather finish (e.g., Craft Japan Leather - Finish / Glossy - Fiebing's Tan Kote, Eco-Flo Super Shene ...). If you only want the antique effect in the depths of the leather or the tooling, apply one or two layers of Craft Japan Leather Finish (or Fiebing's Tan Kote, Eco-Flo Super Shene) on the entire surface of the leather to be treated and then leave it to dry before applying the Craft Japan Antique Carving Dye. Consistency: viscous / gelatinous

Content: 0.1 Kg (€79.00* / 1 Kg)

From €7.90*
Details
da Vinci NOVA Synthetic Brush
da Vinci NOVA Synthetic Brush
da Vinci NOVA Synthetic Brush Available in 6 different sizes. Ideal for painting leather with acrylic colours and all our other leather dyes. The synthetic fibres of the brush are very durable and insensitive to alcohol-based leather dyes or detergents. - extra-fine gold-colored synthetic fibres- silver ferrule- short green polished handles- size assortment no. 2/0 to No. 4

From €3.80*
Details
Edge Dye Roller Pen
Edge Dye Roller Pen
Edge Dye Roller PenThe Edge Roller provides a simple and clean way to apply leather edge paint to your workpieces.Dip the fluted, rotatable tool tip into the leather edge paint of your choice and roll it over the leather edge. You get a professional paint job exactly where you want it.An advantage of the edge roller over the wool dauber is the simple and residue-free cleaning, since it is a metal tip. This means that you can use different edge paints in quick succession with the same tool.

€24.95*
Fiebing`s Acrylic Dye Pack
Fiebing`s Acrylic Dye Pack
Fiebing's Acrylic Dye Pack Acrylic-based leather paints - assortment. Consisting of 11 different Fiebing's Acrylic Dyes, 1 small bottle Fiebing's Resolene 59 ml and 2 camel hair brushes. The different colours can be mixed by additive colour mixing. So you can make your own colour yourself.Please apply the paint with a fine brush. With Fiebing's Acrylic Dye you can "paint" the leather, as in a picture.The colour is flexible after drying on the leather. Shake well before use. Consistency: viscous Content:1x 59 ml Fiebing`s Acrylic Dye Red1x 59 ml Fiebing's Acrylic Dye Orange1x 59 ml Fiebing`s Acrylic Dye Yellow1x 59 ml Fiebing's Acrylic Dye Green1x 59 ml Fiebing`s Acrylic Dye Turquoise1x 59 ml Fiebing's Acrylic Dye Light Blue1x 59 ml Fiebing's Acrylic Dye Blue1x 59 ml Fiebing`s Acrylic Dye Medium Brown1x 59 ml Fiebing`s Acrylic Dye Dark Brown1x 59 ml Fiebing`s Acrylic Dye Black1x 59 ml Fiebing`s Acrylic Dye White 1x 59 ml Fiebing`s Acrylic Resolene neutral 1x camel hair brush, size 2 The colours can also be ordered individually. Note: Sample applications, useful tips and processing aids are well illustrated in our English book "Fiebing`s Fantastic Finishes". Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

€56.95*
Watch CLP-notice!
Fiebing`s Antique Leather Finish
Fiebing`s Antique Leather Finish
Fiebing's Antique Finish Antique finish to emphasize tooled leather. The Fiebing`s Antique Finish "dyes" leather slightly according to the color used and at the same time enhances hollows. Places that should not be dyed must be protected with a suitable finish (e.g., Resolene, Tan Kote, ProResist, Giardini Fixative...) first. The leather is only lightly dyed. If you want to dye leather in one go and give it an antique touch, then use our following products: - Leder Antik Finish Vintage Gel 236ml- Antique leather finish / Fiebing's Antique Leather Stain- Antique leather finish / Fiebing's Hi-liter- Leather Antique Finish / Craft Japan Antique Carving Dye Apply Antique Finish in circular motions and remove excess dye with a soft cloth immediatly. Afterwards this finish has to be protected with a leather finish (like Resolene, Tan Kote, Blockout, Satin Shene). The Fiebing Antique finish looks especially good on tooled, embossed or modeled leather surfaces. Consistency: pasty (like shoe polish) Please choose a color and a size. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Content: 0.118 liter (€92.80* / 1 liter)

From €10.95*
Details
CLP-/REACH-Notice
Signalword
Danger!
Hazard Statements
H313: May be harmful in contact with skin.
Fiebing`s Antique Leather Stain
Fiebing`s Antique Leather Stain
Fiebing's Antique Leather Stain Water-based antique finish to highlight hollows in tooled leather. Easy to apply, fast absorbing and drying. Fiebing's Antique Leather Stain dyes the leather to be treated according to the color used and at the same time emphasizes hollows. Places that should not be dyed must be protected by a suitable finish (e.g., Craft Japan Leather - Finish / Glossy - Fiebing's Tan Kote, Eco-Flo Super Shene ...) first. Apply Fiebing`s Antique Leather Stain in a circular motion and immediately remove excess stain with a soft cloth. Afterwards this finish has to be protected with a leather finish (like Resolene, Tan Kote, Satin Shene ...). Fiebing's Antique Leather Stain works particularly well on tooled, embossed or modeled leather surfaces. Consistency: liquid Please select the color. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Content: 0.118 liter (€80.08* / 1 liter)

From €9.45*
Details
Fiebing`s Dura Edge
Fiebing`s Dura Edge
Fiebing's Dura Edge Edge sealing / edge coating 236 ml Seal leather edges professionally with our Fiebing`s Dura Edge. The resulting, satin gloss, ensures a professional appearance of the edges and is pliable, water and abrasion resistant. A wool dauber is already incorporated in the lid of the bottles. Alternatively you can always use one of our wool daubers or a brush.Apply the Fiebing's Dura Edge and let it dry (do not wipe the edge, it dries wonderfully, giving it the perfect look). Consistency: viscous Please choose between brown and black. Application: Important!: Use the edge colours for leather edges only. Edge paints are not suitable for dyeing the groin or flesh side of leather. Prepare the leather edge for dyeing by sanding it with a fine sandpaper or smoothing the edge with edge burnisher. Stir the edge colour thoroughly. Please do not shake, as otherwise bubbles form which dissolve very slowly only. Apply the edge colour to the leather edge with the a wool dauber in the lid, a brush, wool dauber or our edge roller. Our edge paints dry relatively quickly. Please make sure that any edge paint on the surface is wiped off immediately with a damp cloth to prevent an uneven edge and avoid stains. For a denser paint application apply another coat of edge paint to your work piece. Wait approx. 5 - 10 min. Now you can smooth the edge with an edge burnisher or a bone folder again. After about one hour, the edge paint is dry and adheres firmly to the edge.

Content: 0.236 liter (€101.48* / 1 liter)

From €23.95*
Details
Watch CLP-notice!
Fiebing`s Dye Reducer
Fiebing`s Dye Reducer
Fiebing's Dye Reducer Leather Colour - Thinner for Fiebing's Leather Dye and Fiebings Professional Leather Dye With our Fiebing's Dye Reducer you can dilute Fiebing's oil and alcohol-based leather dyes to spray them if necessary. Consistency: thin Please use suitable gloves and protective equipment to apply the colours. Please note the warnings when using.

Content: 0.118 liter (€44.07* / 1 liter)

€5.20*
Details
CLP-/REACH-Notice
Symbol
Flame: Flammable GHS02 - Flame: Flammable
Exclamation Mark: Health hazard/Hazardous to the ozone layer GHS07 - Exclamation Mark: Health hazard/Hazardous to the ozone layer
Signalword
Danger!
Hazard Statements
H225: Highly flammable liquid and vapour.
H319: Causes serious eye irritation.
H336: May cause drowsiness or dizziness.
Fiebing`s Edge Kote
Fiebing`s Edge Kote
Fiebing's Edge Kote Edge sealer / edge lacquer in 118 ml and 946 ml version Seal leather edges professionally with our Fiebing's Edge Kote. The resulting, semi-gloss, ensures a professional appearance of the edges, is waterproof and flexible. If desired, you can dilute this paint with water. Consistency: viscous Please choose a colour. Application: Important!: Only use the edge paints on leather edges. Edge paints are not suitable for colouring grain or flesh side of the leather. Always try edge paints on scrap pieces first to be safe from unwanted results. Prepare the leather edge for dyeing by sanding it with a fine sandpaper or smoothing the edge with an edge burnisher. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly. Apply the edge paint on the leather edge with a brush, wool dauber or our edge roller. Our edge paints are relatively fast drying. Please make sure that any edge paint that has reached the surface is wiped off with a damp cloth immediately to avoid stains. For a denser paint application apply another coat of edge paint. Wait approx. 5 - 10 min. Now you can smooth the edge with an edge burnisher or a bone folder again. After about one hour, the edge paint has dried and adheres firmly to the edge. Note: Sample applications, useful tips and processing aids are well illustrated in our English book "Fiebing`s Fantastic Finishes". Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.    

Content: 0.118 liter (€117.80* / 1 liter)

From €13.90*
Details
Watch CLP-notice!
Fiebing`s Hi-Liter
Fiebing`s Hi-Liter
Fiebing`s Hi-Liter Antique finish to emphasize hollows in the tooled leather. Easy to apply, fast absorbing and drying. Hi-Liter is leather dye and antique finish in one and colours the leather in a light and warm shade of brown. Creates a dark brown color in hollows of the tooled leather. This gives you a wonderful, powerful contrast. Places that should not be dyed must be protected with a suitable finish first (e.g., Craft Japan Leather - Finish / Glossy - Fiebing's Tan Kote, ...). Apply Fiebing`s Hi-liter in circular motion and rub deep into the hollows. Please remove the excess dye with a damp cloth or sponge. Afterwards this finish has to be protected with a leather finish (like Resolene, Tan Kote, ...). Consistency: viscous Please choose the size

Content: 0.118 liter (€108.47* / 1 liter)

From €12.80*
Details
CLP-/REACH-Notice
Symbol
Health hazard: Serious health hazard GHS08 - Health hazard: Serious health hazard
Signalword
Danger!
Hazard Statements
H320: Causes eye irritation.
H360: May damage fertility or the unborn child .
Fiebing´s Acrylic Dye
Fiebing´s Acrylic Dye
Fiebing's Acrylic Dye Acrylic-based leather paints. The 11 different colors can be mixed by additive color mixing. So you can make your own color yourself.Please apply the paint with a fine brush. With Fiebing's Acrylic Dye you can "paint" the leather, as in a picture.The color is flexible after drying on the leather. Shake well before use. Consistency: viscous Also note our complete package with all colors. Note: Sample applications, useful tips and processing aids are well illustrated in our English book "Fiebing`s Fantastic Finishes". Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Content: 0.059 liter (€120.34* / 1 liter)

From €7.10*
Details
Watch CLP-notice!
Fiebing´s Leather Dye
Fiebing´s Leather Dye
Fiebing's Leather Dye Alcohol-based leather dyes. The 28 different colours can be mixed by additive colour mixing. This way you can make your own colour yourself. The colours dry uniformly and achieve an even coverage. Repeated dyeing or slower application of dyes gives them a stronger and darker dyeing result. These dyes are not completely nonfading. If you need nonfading dyes, use Fiebing's Pro Dye (Professional Oil Dye) from our range.We recommend using our wool dauber for dying and apply a surface finish after. Please select the colour. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us. Please use suitable gloves and protective equipment to apply the dyes. Please note the warnings when using.

Content: 0.118 liter (€75.85* / 1 liter)

From €8.95*
Details
CLP-/REACH-Notice
Symbol
Flame: Flammable GHS02 - Flame: Flammable
Exclamation Mark: Health hazard/Hazardous to the ozone layer GHS07 - Exclamation Mark: Health hazard/Hazardous to the ozone layer
Signalword
Danger!
Hazard Statements
H222: Extremely flammable aerosol.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
Watch CLP-notice!
Fiebing´s Pro Dye (Prof. Oil Dye)
Fiebing´s Pro Dye (Prof. Oil Dye)
Fiebing`s Pro Dye (former name Fiebing`s Professional Oil Dye) This is an improved version of the proven Fiebing's Leather Dye. Fiebing's Pro Dyes are specifically made for vegetable / vegetable tanned leather. They produce an excellent, deep and uniform colour. Fiebing's Pro Dyes are waterproof and nonfading, which prevents them from washing out and fading. Repeated staining or slower application of colour gives them a richer, darker colour. We recommend to use our wool dauber for dyeing and apply a surface finish after. Please select the colour. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us. Please use suitable gloves and protective equipment to apply the colours. Please note the warnings when using.Safety Datasheet

Content: 0.118 liter (€80.51* / 1 liter)

From €9.50*
Details
CLP-/REACH-Notice
Symbol
Flame: Flammable GHS02 - Flame: Flammable
Exclamation Mark: Health hazard/Hazardous to the ozone layer GHS07 - Exclamation Mark: Health hazard/Hazardous to the ozone layer
Signalword
Danger!
Hazard Statements
H225: Highly flammable liquid and vapour.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
Fiebing's Institutional Leather Dye / LeatherColors™
Fiebing's Institutional Leather Dye / LeatherColors™
Fiebing's Institutional Leather Dye / LeatherColors™Water-based leather dyes.The Fiebing's Institutional Leather Dye / LeatherColors™ is a non-toxic leather paint specifically designed for use in schools and other public institutions. The 8 different colours can be mixed by additive colour mixing. This way you can make your own colour yourself.The colours dry evenly and achieve good coverage. Repeated staining or slower application of the colour gives them a stronger and darker staining results. Dilute the colours with water to reduce the coverage or intensity.We recommend to use our wool dauber for dyeing followed by a leather finish.Important additional information: "Fiebing's Institutional Leather Dye" becomes "Fiebing's LeatherColors™". The colour itself remains unchanged in its composition. We ask for your understanding that we can no longer offer the actual "Institutional Leather Dye's" in all colours. Delivery will be seamlessly integrated into the product with the new title "LeatherColors™".Please select the colour.Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Content: 0.118 liter (€83.47* / 1 liter)

€9.85*
Details
Fiebing's Vintage Gel 236 ml
Fiebing's Vintage Gel 236 ml
Leather Vintage Gel / Vintage Gel 236 ml Apply leather Vintage Gel and immediately remove excess dye with a soft cloth or sponge. Allow to dry briefly and seal with a leather care finish. The Vintage Gel looks particularly good on tooled, embossed or modeled leather surfaces, because more dye remains in the hollows than on smooth surfaces. It creates an "antique look". Please choose from 7 different colours. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.Download safety data sheet

From €13.50*
Details
Watch CLP-notice!
Tip
GIARDINI - MAXCRAFT™ DYE
GIARDINI - MAXCRAFT™ DYE
Leather colour / MAXCRAFT™ DYE Suitable for even dyeing of natural smooth leather (vegetable tanned or chrome tanned). MAXCRAFT™ offers you a wide range of colour options available readily mixed or to be mixed by yourself. There is nothing standing your way to create your own colour variations. Whether for full-surface dyeing or for background colouring with floral motifs - you get an excellent coverage like an acrylic or top coat. However, the surface texture or scars are retained as in the use of classic penetrating dye or antique gel. Excellent features: VOC reduced (volatile organic compounds) water repellent when dried out abrasion and scratch resistant fade Subsequent finishing is not necessary colours are miscible with each other colours perfectly combinable with our MAXMATT™ and MAXEDGE™ edge colours Minimal colour differences when using different types of leather. Consistency: viscousImportant!: Only use the leather dyes for smooth leather. MAXCRAFT™ leather colours are not suitable for recolouring already industrially dyed and finished leathers (eg coloured furniture leather or automotive leather) Only partially suitable for colouring leather edges. Use the matching colours from our MAXMATT™ or MAXEDGE™ range. Please always test on a sample before dyeing on the actual work piece first. This way unpleasant results can be avoided in advance. If you want to add water to dilute, always use distilled water. (Maximum dilution of 20%, higher dilution reduces the properties of the dye) Store the product at consistent temperatures. Use within 6 months after opening. MAXCRAFT™ is fundamentally different from all other leather colours, making direct comparisons difficult. Download: safetydatasheetApplication: Stir the leather dye thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly. Apply leather dye to a slightly dampened sponge, e.g. our Fiebing's Dye Sponge. For dyeing leather, we recommend slightly diluting the paint and applying it with a brush. The use of wool daubers for dyeing is not recommended, relief type markings can be the result. Rub the leather surface to be dyed completely with circular movements and slight pressure to cover the whole area. Repeat the process as needed a second time to get a denser dye job. After about 20 minutes, the dye is dry and can be polished again if desired. This way you can get the desired gloss effect. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Content: 0.125 liter (€84.80* / 1 liter)

From €10.60*
Details
CLP-/REACH-Notice
Hazard Statements
EUH208: Contains . May produce an allergic reaction.
GIARDINI - MAXEDGE™ Pro Cleaner
GIARDINI - MAXEDGE™ Pro Cleaner
GIARDINI - MAXEDGE™ Pro Cleaner Cleaning fluid, 250 ml Cleaning fluid for cleaning edge paint rollers soiled by use.Attention! MAXEDGE™ Pro Cleaner is specially designed for use with our MAXMATT™ and MAXEDGE™ Pro edge paints. The function with edge paints from other manufacturers may be limited. Manufacturer information: Suitable for clean and easy cleaning of edge rollers. Suitable for softening paint residues which are difficult to remove otherwise. MAXEDGE™ Pro Cleaner is water-based, but contains surfactants to a certain extent which help to break up the dried paint, making cleaning much easier. The use is especially recommended during the individual operations. Thus new colour can be used easily with an edge paint roller. Consistency: thin Application: Put a sufficient amount of MAXEDGE™ Pro Cleaner in a glass to cover the soiled parts of the edge roller. Put the soiled tool in the prepared glass. After a brief exposure time of approx. 10 minutes, the paint residues which are now dissolved can be easily removed with a rag or a small brush.

Content: 0.25 liter (€47.20* / 1 liter)

€11.80*
GIARDINI - MAXEDGE™ Pro Fluo Edge Paint
GIARDINI - MAXEDGE™ Pro Fluo Edge Paint
GIARDINI - MAXEDGE™ Pro Fluo Edge Paint Edge sealing / edge varnish Our MAXEDGE™ Pro Fluo Edge Paints are available in 5 fluorescent colours. All colours appear after applying to the leather in the colour that is already represented in its liquid stage. MAXEDGE™ Pro Fluo Edge Paints dry with a satin matt finish and cover the leather edge with a rubbery, hard to peel paint application that is soft and pliable. Info: MAXEDGE™ Pro Protecting Gloss can be used for final fixation. This creates a shiny edge. Excellent features: VOC reduced (volatile organic compounds) waterproof when dried very abrasion, cut and scratch resistant rubbery paint application non-fading very pliable (colour does not break during movement) soft edge when dried out (no rough, protruding leather fibres that reduce the feeling of a pleasant edge) subsequent polishing is not necessary dilutable with up to 20% water Consistency: viscous Important!: Only use the edge paints for leather edges. Edge paints are not suitable for colouring the grain or flesh side of leather. Please always test on a sample first before dyeing on the actual workpiece. This way unpleasant results can be avoided in advance. If you want to add water to dilute, always use distilled water. Do not leave the bottle standing opened for too long. Store the product at the same temperature as possible. Use within 6 months after opening. Application: Prepare the leather edge for dyeing by sanding it with a fine grit sandpaper and / or burnishing the edge. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly. Apply the edge paint to the leather edge with a brush, wool dauber or our edge roller. Please make sure that any edge colour on the surface is wiped off immediately with a damp cloth, to avoid uneven edges and staining. For a denser paint application apply another coat of edge paint to your work piece. Wait approx. 20 min. (Our MAXEDGE™ Pro Fluo Edge Paints dry a bit slower than other manufacturers' products, so you have plenty of time to paint even long edges without the need to rush.) After about an hour, the edge paint is dry and adheres firmly to the edge. A subsequent polishing is no longer necessary. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Content: 0.125 liter (€113.60* / 1 liter)

From €11.80*
Details
GIARDINI - MAXEDGE™ Pro Iridescent Gloss
GIARDINI - MAXEDGE™ Pro Iridescent Gloss
GIARDINI - MAXEDGE™ Pro Iridescent Gloss Edge sealing / edge varnish Our MAXEDGE™ Pro Iridescent Gloss are available in in 4 iridescent metallic colours. It is a protective finish for MAXMATT™ and MAXEDGE™ Pro edge paints. MAXEDGE™ Pro Iridescent Gloss dries shiny and covers the already dyed/painted leather edge with a rubber like, hard to remove paint application that is still soft and flexible. MAXEDGE™ Pro Iridescent Gloss is only suitable as a protective finish for MAXMATT™ or MAXEDGE™ Pro edge paints. Attention! -- To obtain the Iridescent effect it is always necessary to apply a black Giardini Edge Paint as base, in order to enhance the visibility of this effect.-- Excellent features: VOC reduced (volatile organic compounds) waterproof if dried out very abrasion, cut and scratch resistant rubbery paint application non-fading very flexible (paint does not break during movement) soft edge when dried out (no rough, protruding leather fibres which reduce the feeling of a pleasant edge) subsequent polishing is not necessary Consistency: viscous Important!: Use the MAXEDGE™ Pro Protecting Gloss exclusively for leather edges painted with MAXMATT™ and MAXEDGE™ Pro edge paints. Edge paints are not suitable for colouring grain or flesh side of the leather. Please always test on a sample before applying on the actual work piece. So unpleasant results can be avoided in advance. Do not leave the bottle standing in the air for too long. Store the product at consistent temperatures. Use within 6 months after opening Application: Prepare the leather edge for dyeing by sanding it with a fine sandpaper or smoothing the edge with an edge burnisher. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly. Apply the edge paint with a brush, wool dauber or our edge roller onto the leather edge painted with black MAXMATT™ or MAXEDGE™ Pro edge paints. Wait for about 40 minutes until the MAXEDGE™ Pro Protecting Gloss has dried. After about an hour, the edge paint has completely dried and adheres firmly to the edge. A subsequent polishing is not necessary.Download: safetydatasheet Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Content: 0.125 liter (€189.60* / 1 liter)

From €23.70*
Details
GIARDINI - MAXEDGE™ Pro Matte Edge Paint
GIARDINI - MAXEDGE™ Pro Matte Edge Paint
GIARDINI - MAXEDGE™ Pro Matte Edge Paint Edge sealing / edge varnish Our MAXEDGE™ Pro edge paints are available in all basic colours. These can be mixed as desired in many different colours (see colour chart). All colours appear after applying to the leather in the colour that is already represented in its liquid stage. MAXEDGE™ Pro Matte Edge Paints dry with a satin matt finish and cover the leather edge with a rubbery, hard to peel paint application that is soft and pliable. Excellent features: VOC reduced (volatile organic compounds) waterproof when dried very abrasion, cut and scratch resistant rubbery paint application non-fading very pliable (colour does not break during movement) soft edge when dried out (no rough, protruding leather fibres that reduce the feeling of a pleasant edge) subsequent polishing is not necessary Up to 20% dilutable with water Consistency: viscous Important!: Only use the edge paints for leather edges. Edge paints are not suitable for colouring the grain or flesh side of leather. Please always test on a sample first before dyeing on the actual workpiece. This way unpleasant results can be avoided in advance. If you want to add water to dilute, always use distilled water. Do not leave the bottle standing opened for too long. Store the product at the same temperature as possible. Use within 6 months after opening A clear mixing table for the colors shown in the color chart can be found -> here <-. Application: Prepare the leather edge for dyeing by sanding it with a fine grit sandpaper and / or burnishing the edge. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly. Apply the edge paint to the leather edge with a brush, wool dauber or our edge roller. Please make sure that any edge colour on the surface is wiped off immediately with a damp cloth, to avoid uneven edges and staining. For a denser paint application apply another coat of edge paint to your work piece. Wait approx. 20 min. (Our MAXEDGE™ Pro Matte Edge Paints dry a bit slower than other manufacturers' products, so you have plenty of time to paint even long edges without the need to rush.) After about an hour, the edge paint is dry and adheres firmly to the edge. A subsequent polishing is no longer necessary. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Content: 0.125 liter (€94.40* / 1 liter)

From €11.80*
Details
GIARDINI - MAXEDGE™ Pro Metal Edge Paint
GIARDINI - MAXEDGE™ Pro Metal Edge Paint
GIARDINI - MAXEDGE™ Pro Metal Edge Paint Edge sealing / edge varnish Our MAXEDGE™ Pro edge paints are available in 2 metallic colours. These can be mixed as desired in many different colours (see colour chart). All colours appear after applying to the leather in the colour that is already represented in its liquid stage. MAXEDGE™ Pro Metal Edge Paints dry with a satin matt finish and cover the leather edge with a rubbery, hard to peel paint application that is soft and pliable. Info: MAXEDGE™ Pro Protecting Gloss can be used for final fixation. This creates a shiny edge. Excellent features: VOC reduced (volatile organic compounds) waterproof when dried very abrasion, cut and scratch resistant rubbery paint application non-fading very pliable (colour does not break during movement) soft edge when dried out (no rough, protruding leather fibres that reduce the feeling of a pleasant edge) subsequent polishing is not necessary Consistency: viscous Important!: Only use the edge paints for leather edges. Edge paints are not suitable for colouring the grain or flesh side of leather. Please always test on a sample first before dyeing on the actual workpiece. This way unpleasant results can be avoided in advance. If you want to add water to dilute, always use distilled water. Do not leave the bottle standing opened for too long. Store the product at the same temperature as possible. Use within 6 months after opening. Application: Prepare the leather edge for dyeing by sanding it with a fine grit sandpaper and / or burnishing the edge. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly. Apply the edge paint to the leather edge with a brush, wool dauber or our edge roller. Please make sure that any edge colour on the surface is wiped off immediately with a damp cloth, to avoid uneven edges and staining. For a denser paint application apply another coat of edge paint to your work piece. Wait approx. 20 min. (Our MAXEDGE™ Pro Metal Edge Paints dry a bit slower than other manufacturers' products, so you have plenty of time to paint even long edges without the need to rush.) After about an hour, the edge paint is dry and adheres firmly to the edge. A subsequent polishing is no longer necessary. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Content: 0.125 liter (€94.40* / 1 liter)

From €11.80*
Details
GIARDINI - MAXMATT™ Dense Edge Paint
GIARDINI - MAXMATT™ Dense Edge Paint
GIARDINI - MAXEDGE™ Dense Edge Paint Edge sealing / edge varnish Our MAXEDGE™ Pro edge paints are available in all basic colours. These can be mixed as desired in many different colours (see colour chart). All colours appear after applying to the leather in the colour that is already represented in its liquid stage. MAXEDGE™ Dense Edge Paints dry with a satin matt finish and cover the leather edge with a rubbery, hard to peel paint application that is soft and pliable. Excellent features: VOC reduced (volatile organic compounds) waterproof when dried very abrasion, cut and scratch resistant rubbery paint application non-fading very pliable (colour does not break during movement) soft edge when dried out (no rough, protruding leather fibres that reduce the feeling of a pleasant edge) subsequent polishing is not necessary dilutable with up to 20% water Consistency: viscous Important!: Only use the edge paints for leather edges. Edge paints are not suitable for colouring the grain or flesh side of leather. Please always test on a sample first before dyeing on the actual workpiece. This way unpleasant results can be avoided in advance. If you want to add water to dilute, always use distilled water. Do not leave the bottle standing opened for too long. Store the product at the same temperature as possible. Use within 6 months after opening. A clear mixing table for the colors shown in the color chart can be found -> here <-. Application: Prepare the leather edge for dyeing by sanding it with a fine grit sandpaper and / or burnishing the edge. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly. Apply the edge paint to the leather edge with a brush, wool dauber or our edge roller. Please make sure that any edge colour on the surface is wiped off immediately with a damp cloth, to avoid uneven edges and staining. For a denser paint application apply another coat of edge paint to your work piece. Wait approx. 20 min. (Our MAXEDGE™ Dense Edge Paints dry a bit slower than other manufacturers' products, so you have plenty of time to paint even long edges without the need to rush.) After about an hour, the edge paint is dry and adheres firmly to the edge. A subsequent polishing is no longer necessary. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Content: 0.125 liter (€132.40* / 1 liter)

From €11.80*
Details
GIARDINI MAXEDGE™ Pro Protecting Gloss
GIARDINI MAXEDGE™ Pro Protecting Gloss
GIARDINI MAXEDGE™ Pro Protecting Gloss Edge sealer / edge finish Our MAXEDGE™ Pro Protecting Gloss is a colourless protective finish for MAXMATT™ and MAXEDGE™ Pro edge paints. MAXEDGE™ Pro Protecting Gloss dries shiny and covers the already dyed/painted leather edge with a rubber like, hard to remove paint application that is still soft and flexible.Attention! MAXEDGE™ Pro Protecting Gloss is only suitable as a protective finish for MAXMATT™ or MAXEDGE™ Pro edge paints.Excellent features: VOC reduced (volatile organic compounds) waterproof if dried out very abrasion, cut and scratch resistant rubbery paint application non-fading very flexible (paint does not break during movement) soft edge when dried out (no rough, protruding leather fibres which reduce the feeling of a pleasant edge) subsequent polishing is not necessary Consistency: viscous Important!: Use the MAXEDGE™ Pro Protecting Gloss exclusively for leather edges painted with MAXMATT™ and MAXEDGE™ Pro edge paints. Edge paints are not suitable for colouring grain or flesh side of the leather. Please always test on a sample before applying on the actual work piece. So unpleasant results can be avoided in advance. Do not leave the bottle standing in the air for too long. Store the product at consistent temperatures. Use within 6 months after opening. Application: Prepare the leather edge for dyeing by sanding it with a fine sandpaper or smoothing the edge with an edge burnisher. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly. Apply the edge paint with a brush, wool dauber or our edge roller onto the leather edge painted with MAXMATT™ and MAXEDGE™ Pro edge paints. Wait for about 40 minutes until the MAXEDGE™ Pro Protecting Gloss has dried. After about an hour, the edge paint has completely dried and adheres firmly to the edge. A subsequent polishing is not necessary.Download: Safetydatasheet

Content: 0.125 liter (€75.20* / 1 liter)

From €9.40*
Details
GIARDINI MAXMATT™ Extra-Matte Topcoat
GIARDINI MAXMATT™ Extra-Matte Topcoat
GIARDINI MAXMATT™ Extra-Matte Topcoat Edge Seal / Edge Paint Finish, 250 ml Our MAXMATT™ Extra Matte Topcoat is a colorless protective finish for MAXMATT™ and MAXEDGE™ Pro edge paints. MAXMATT™ Extra Matte Topcoat dulls the gloss of the edge paint used and provides an extra matt edge. It covers the already dyed leather edge with a rubber like, hard to remove protective layer that is still soft and pliable.Attention! MAXMATT™ Extra Matte Topcoat is only suitable as a matting and protective finish for MAXMATT™ or MAXEDGE™ Pro Edge Paints. Excellent features: waterproof when dried very abrasion, cut and scratch resistant rubbery paint application very flexible (paint does not break during movement) easy application Consistency: viscous Important!: Only use the MAXMATT™ Extra-Matte Topcoat for leather edges painted with MAXMATT™ and MAXEDGE™ Pro Edge Paint. Edge paints are not suitable for colouring grain or flesh side of the leather. Please always test on a sample before applying on the actual work piece. So unpleasant results can be avoided in advance. Do not leave the open bottle standing in the air for too long. Store the product at consistent temperatures. Use within 6 months after opening. Application: Prepare the leather edge for dyeing by sanding it with a fine sandpaper or smoothing the edge with an edge burnisher. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly. Apply the edge paint with a brush, wool dauber or our edge roller onto the leather edge painted with MAXMATT™ and MAXEDGE™ Pro edge paints. Wait about 40 minutes until the MAXMATT™ Extra Matte Topcoat has dried. After about an hour, the edge paint has completely dried and adheres firmly to the edge. A subsequent polishing is not necessary.

Content: 0.25 liter (€71.00* / 1 liter)

€17.75*
Watch CLP-notice!
Leather color / Metallic color, ROC Denmark
Leather color / Metallic color, ROC Denmark
Leather color / Metallic color / top coat, ROC Denmark The very highly pigmented and therefore highly opaque ROC metallic colours are ideal for painting leather and other materials. A large-scale application of the paint is as easy and without banding possible as the partial use when setting accents. Note: The colors are not water- or scratch- resistant after drying out. Typical metallic colors, the metallic particles can detach on contact or movement. Therefore, a seal should be applied after drying to prevent this erosion and not accidentally elsewhere to provide a glitzy surprise. (As a waterproof finish we recommend one of the following products: Giardini MAXCRAFT Fixative, Eco Flo Super Shene or Fiebing's Resolene) For dyeing we recommend our brush, wool brush or dyeing sponge. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Content: 0.06 liter (€158.33* / 1 liter)

From €9.50*
Details
CLP-/REACH-Notice
Hazard Statements
H412: Harmful to aquatic life with long lasting effects.
Leather Dye, ROC Danmark
Leather Dye, ROC Danmark
Leather Dye, ROC Danmark / ROC Narvsværte - made in Denmark For dyeing vegetable tanned leather, as well as uncoated shoe or furniture leather. Also suitable for small repairs of leather shoes and leather clothing. ROC leather dyes produce an excellent, deep and uniform color, are waterproof and lightfast. A washing out or bleaching of the colors is thereby reduced. Repeated dying or slower application of the dyes gives them an even stronger and darker color. ROC leather colors are available in 14 different colors:Black, Earth Brown (Black Brown), Dark Brown, Mahogany, Red Brown, Yellow Brown, Green, Blue, Violet, Cyclamen, Red, Orange, Tan and Yellow.In addition, the color "black extra" is available as long as stock is enough. Note: Please note that the colors on the color chart are for guidance only. The final color result depends on the way of applying the color, the base color of the leather, as well as the finish used afterwards. Always test the dye on an hidden spot or on a leather rest to avoid unpleasant surprises. ROC leather dyes are heavily pigmented and ensure a very rich color application. The colors are very light stable (lightfast) For dyeing we recommend our wool brush or dyeing sponge and then a surface finish to seal the dyed leather. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us. Please use suitable gloves and protective equipment to apply the colours. Please note the warnings when using.

Content: 0.06 liter (€120.00* / 1 liter)

From €7.70*
Details
Leather Edge Paint, ROC Denmark
Leather Edge Paint, ROC Denmark
Leather Edge Paint, ROC Denmark Edge sealing / edge varnish Our ROC edge colors are available in Black, Brown and Neutral. These can be mixed at will. The ROC edge colors dry very quickly and with a satin matt shine. The Excellent features: The colors are absorbed very quickly very fluid, easy application with brushes or woolen daubers is easily possible highly pigmented, one job, full coverage Covers without banding Lightfast Very flexible (color does not break in motion) Subsequent polishing is not necessary, but can be polished to the desired gloss level Important!:- Only use the edge paints for leather edges.- Edge paints are not suitable for colouring the grain or flesh side of leather.- Please always test on a sample first before dyeing on the actual workpiece. This way unpleasant results can be avoided in advance. werden.- If you want to add water to dilute, always use distilled water.- Do not leave the bottle standing opened for too long.- Store the product at a constant temperature (ideal 10-15°), avoid storage under 5°C and above 20°C Application: Prepare the leather edge for dyeing by sanding it with a fine grit sandpaper and / or burnishing the edge.. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly. Apply the edge paint to the leather edge with a brush or a wool dauber. Please make sure that any edge colour on the surface is wiped off immediately with a damp cloth, to avoid uneven edges and staining. For a denser paint application apply another coat of edge paint to your work piece. Wait approx. 5 -10 min. After 15 min, the edge paint is dry and adheres firmly to the edge. A subsequent polishing is no longer necessary. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Content: 0.25 liter (€62.40* / 1 liter)

From €15.60*
Details
Lederfarbe Verdünnung, ROC Denmark
Lederfarbe Verdünnung, ROC Denmark
ROC Denmark - Verdünner Verdünnung für ROC Denmark Lederfarben - auch zum Reinigen von Pinseln geeignet.

Content: 0.25 liter (€35.60* / 1 liter)

From €8.90*
Details
MAXCRAFT™ Leather Dye Thinner
MAXCRAFT™ Leather Dye Thinner
MAXCRAFT™ Leather Dye Thinner is a product designed to be used in exclusive combination with the Maxcraft Leather Dye, in case you need to lighten the color tone of the dye. The thinner should be mixed together with the Maxcraft Leather dye. More quantity is added and more clear the color will become. The product has been designed to not affect the technical characteristics of the dye, therefore there are no limits to the amount of thinner that can be added to the Leather dye. To achieve the desired color tone, we recommend to gradually add small amounts of diluent until the required result is achieved.Download: safetydatasheet

Content: 0.125 liter (€75.20* / 1 liter)

From €9.40*
Details
MAXCRAFT™ Leather Wash up (Wash Up Finish)
MAXCRAFT™ Leather Wash up (Wash Up Finish)
MAXCRAFT™ Leather Wash up (Wash Up Finish) Leather Wash Up is an auxiliary product of the MAXCRAFT series, designed to create a wash-up/vintage effect on the leather. This finish is applied after the coloring phase of the leather surface is completed by using the MAXCRAFT Leather dye. It acts with a superficial and partial removal of the dye, thus creating a particular wash up effect on the leather surface. The product can be applied by hand with a dauber, a cloth or sponge. In case of repaint operations the product can be used to clean the leather before being dyed again. After having realized the Wash up effect, other products of the Maxcraft series can also be applied on top of it, such as Leather dye Fixative, Leather Gloss Finish or Leather Dye Conditioner. Download: safetydatasheet

Content: 0.25 liter (€33.00* / 1 liter)

From €8.25*
Details
MAXEDGE™ Pro Color Set
MAXEDGE™ Pro Color Set
MAXEDGE™ Pro Color Set Including 18 different colors. Including MAXEDGE™ Pro Basic Edge Paint of below color each 30 ml:10 white, 11 black, 14 violet, 18 beige, 24 brown, 26 yellow, 36 dark brown, 45 light blue, 49 green, 63 pink, 58 orange, 59 light brown, 61 blue, 69 tan, 77 grey, 80 red, 85 ochre, 90 light green

€107.00*
Mini Edge Dye Roller Tool
Mini Edge Dye Roller Tool
Mini Edge Dye Rollerfor easy and even application of edge colors to your leather workpieces. The tool, made from a brass block, is an ideal aid for edge coloring.Use:Edge paint is filled into the brass bowl until the roller is in contact with it in order to be able to absorb paint. Now let the workpiece edge roll over the solid roller and the paint will only adhere to the edge as desired. Accidental coloring of the surface can thus be greatly reduced.After dyeing, the edge dye can be cleaned easily and without residue - reuse is therefore possible at any time with other colors. 2 rollers are included.Dimensions:Length: 41.5 mmWidth: 25 mmHeight: 10 mmRolls: 14 mm diameter, width: 10 mm

€17.75*
Refillable Felt Pen
Refillable Felt Pen
Felt pen for leather colours (refillable) Empty felt pen for filling with leather dyes in 2 different sizes. Ideal for colouring small areas, signing and writing on workpieces or even dyeing of leather edges. Suitable for filling are our following products: Fiebing's Institutional Leather Dye / LeatherColors™ Fiebing's Leather Dye Fiebing's Professional Oil Dye Eco-Flo Leather Dye leather dye Important: Viscous colours are not suitable for use. (Eg antique gel, MAXCRAFT paints, acrylic colours) Application: Open the bottom of the pen and remove the felt insert. Dip the felt in the desired colour and wait until completely soaked. Put the felt insert back into the sleeve and close tightly. After about 30 seconds, the tip of the felt pen is saturated with your desired leather colour and the pen can be used. versions: # 1: - Fineliner for thinnest lines# 2: - Thick felt pen, suitable for larger areas or leather edges

From €5.70*
Details
ROC Denmark Acryl-Deckfarbe
ROC Denmark Acryl-Deckfarbe
ROC Denmark Acrylic Leathercoulors - A variety of 60 colours, which can be also mixed to your taste. You can use these colours for painting pictures on leather, if requiered you can dilute with clean water. Use a fine hairbrush for application. After drying the colours will be still flexible to follow the bending of your leathergoods. Shake well befor use and clean your brushes after use with water. For maximum durability apply an acrylic leatherfinish.   Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

From €9.50*
Details
Roller Dye Tool
Roller Dye Tool
Roller Dye Tool For an easy and even application of edge paints onto your leather edges. The tool, machined from an aluminum block and extremely robust, is an ideal aid in edge painting and for very long workpieces, e.g. Belts. Use: Edge paint is filled into the aluminum bowl until the roller has contact with it and its surface is covered with paint when used. The application of paint can be precisely dosed with the help of the plastic wiper. (The closer the scraper sits, the less the amount of paint to be applied.) Now let the leather edge roll over the solid roller and the paint will stick to the edge as desired. Accidental painting of the surface can thus be greatly reduced. After dyeing, the roller tool can be cleaned easily and residue-free - a re-use with other paints is therefore possible at any time. Dimensions: Length: 110 mmWidth: 60 mmHeight: 5.7 mm

€83.20*
Spachtel für Kantenfarben
Spachtel für Kantenfarben
Spachtel für Kantenfarben aus Edelstahl, alternative Möglichkeit zum Auftragen von dickflüssigen Kantenfarben auf Lederkanten. Ausgestattet ist diese Spachten mit jeweils einem abgerundeten und einem geraden Ende. Die Spachtel kann problemlos mit Wasser, Aceton, Pinselreiniger oder MAXEDGE™ Pro Cleaner gereinigt werden. Abmessungen:Länge: 202 mmBreite: 8,4 mm

€8.10*
Viscose Dying Sponge – 2 pc/pack
Viscose Dying Sponge – 2 pc/pack
Viscose sponge (swelling sponge) - pack of 2 pieces,ideal for the even and large application of leather dyes and finishes on leather or for moistening the leather before tooling.Our dyeing sponges are made from regenerated cellulose. The fine pores of the sponge provide a large surface area with open cell structure. The natural viscose sponge is therefore able to absorb 20 times its own dry weight of water and store it in its pore structure. The viscose sponge will hold the liquid until full capacity is reached. This applies to liquids such as e.g. leather dyes and finishes, as well as leather oils or e.g. leather cleaners like Fiebing's Dye Prep or Deglazer.Other excellent features:    Handy form    Excellent color pickup    Uniform color output    Soft surface for scratch-free dyeing & finishing    Exact dyeing & finishing with clean sponge edges    No decay of the sponge when using alcohol based dyes & finishes    No further swelling once the sponge is swollen    Can be cut to the desired shape with a pair of scissors or craft knife in the pressed condition    Made in GermanyImportant information before first use:Our "viscose dyeing sponges" are swelling sponges which are delivered in a pressed state. Please soak them in water before first use and rinse them well. The form after swelling is retained. Once swollen, the sponge can be used over and over. It is recommended to moisten the sponge slightly before use, even after repeated use. This allows a better distribution of the colors / finishes in the sponge - then a more even application on the leather.Dimensions:- in pressed condition: height: 2 mm, length & width: 6.0 cm- when swollen: height: 2.5 cm, length & width: 6.5 cmIf you order 1 unit you will receive 2 viscose dyeing sponges (swelling sponge).

From €3.40*
Details
Wool Dauber (10 pcs.)
Wool Dauber (10 pcs.)
Wool dauber in 3 different sizes. (Ø approx. 15 mm / Ø approx. 25 mm / Ø approx. 35 mm) for uniform mixing and application of leather dye or finish on the surfaces or edges. Available options: small: 10 wool daubers with approx. 15 mm head diameter (especially suitable for edges)medium: 10 wool daubers with approx. 25 mm head diameterlarge: 10 wool daubers with approx. 35 mm head diameter (especially suitable for surfaces) If you order 1 unit you will receive 10 wool daubers.

Content: 10 pieces (€0.40* / 1 pieces)

From €3.95*
Details
This website uses cookies to ensure the best experience possible. More information...
Shopbewertung - rickert-werkzeug.de