Stainless Steel Ruler, 150 mm / 300 / 600 mm Stainless steel ruler made of hardened, stainless steel with matt chrome-plated surface for glare-free reading. Top millimetre scale bottom ½-millimetre scale. Blank backside. - particularly high durability by manufacturing of hardened stainless steel.- Matt chrome surface for glare-free and safe reading.- Top millimetre division, bottom ½ - millimetre division with red decimal numbering.- Tolerance ± 0,3 mm Available options: - 150 mm (6")- 300 mm (12")- 600 mm (24")When ordering 1 piece you will receive 1 Hultafors stainless steel ruler of the chosen size.

Australian Strander Massive and robust lace cutter, cuts up to 2 mm thick leather in fine stripes. The strip width is infinitely adjustable from 0 - 10 mm width.

Blades for Swivel Knifes (price per piece) These blades are suitable for our swivel knife, ergonomic swivel knife and swivel knife sets with a shank size of 5.5 mm. (Not suitable for Barry King swivel knives.) For sharpening we recommend our sharpening tool and jeweler's rouge. Available options: # 1: normal - blade with a blade width of 12.5 mm and a thickness of 2.5 mm (straight bevel) # 2: fine - blade with a blade width of 6.5 mm and a thickness of 1.4 mm (oblique bevel) # 3: hollow ground - blade with a blade width of 9.5 mm and a thickness of 0.5 mm in the middle at the thinnest point (straight bevel) # 4: normal - blade with a blade width of 6.5 mm and a thickness of 2.5 mm (oblique bevel) # 5: normal - blade with a blade width of 9.5 mm and a thickness of 2.5 mm (straight bevel) - this is the blade coming with our standard swivel knives. # 6: hollow ground - blade with a blade width of 12.5 mm and a thickness of 1.0 mm in the middle at the thinnest point (straight bevel) # 7: hollow ground - blade with a blade width of 6.5 mm and a thickness of 1.0 mm in the middle at the thinnest point (straight bevel) # 8: hair blade - blade with a blade width of 4.2 mm and a height of 6.3 mm (oblique bevel) # 9: normal - blade with a blade width of 6.5 mm and a thickness of 2.5 mm (straight bevel) # 10: hair blade - blade with a blade width of 2.7 mm and a height of 6.3 mm (oblique bevel) When ordering 1 piece you will receive 1 blade of the selected version.

Versatile and precise pattern knife in the style of Vergez Blanchard. Cuts easily complex patterns in heavy leather.Comes with: D2- Blade, Brass handle, Allen Key.

Rotring Burmester Stencil Set "Centro", consisting of 3 stencils. The largest stencil is about 315 mm wide. Made of high quality plastic, crystal clear, with double surrounding ink face. For marking universal curves.

Button Hole Punch For punching buttonholes into leather. Ideal for use with Sam Browne studs Ø 4 mm - Ø 8 mm. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories. Available options: 3.0 mm: hole - Ø 3 mm, slit length approx. 4 mm. (ideal for Sam Browne studs Ø 4 - 5 mm)4.0 mm: hole - Ø 4 mm, slit length approx. 5 mm. (ideal for attached button Ø 6 mm)5.0 mm: hole - Ø 5 mm, slit length approx. 6 mm.6.0 mm: hole - Ø 6 mm, slit length approx. 7 mm. (ideal for Sam Browne studs Ø 8 mm)7.0 mm: hole - Ø 6 mm, slit length approx. 9.5 mm. (ideal for Sam Browne studs Ø 8 mm)8.0 mm: hole - Ø 8 mm, slit length approx. 8.5 mm. (ideal for bag pocket button Ø 10 mm)11.0 mm: hole - Ø 11 mm, slit length approx. 10 mm. (ideal for attached button Ø 12-13 mm) When ordering 1 piece you will receive 1 button hole punch of the selected size.

Ceramic Blade for Swivel Knife (price per piece) Re-sharpening of the blade is eliminated. Permanent sharpness and edge retention for exact cuts. These blades are suitable for our swivel knife, ergonomic - swivel knife and swivel knife - sets with a shank size of 5.5 mm Available options: # 1: normal ceramic blade with a width of 6.0 mm and 2.8 mm thick (oblique bevel) # 2: normal ceramic blade with a width of 9.5 mm and 2.6 mm thick (straight bevel) # 3: fine ceramic blade with a width of 6.0 mm and 1.6 mm thick (oblique bevel) # 4: beader ceramic blade with a width of 9.0 mm and a double bevel at 2.0 mm distance (double bevel) When ordering 1 piece you will receive 1 ceramic blade of the selected type.

Craft Japan Standard Blades for Swivel Knife (price per piece) These blades are suitable for our swivel knife, ergonomic swivel knife and swivel knife sets with a shank size of 5.5 mm. (Not suitable for Barry King swivel knives.) For sharpening we recommend our sharpening tool and jeweler's rouge. Available options: # 1: fine - blade with a blade width of 6.5 mm and a thickness of 1.4 mm (oblique bevel) # 2: normal - blade with a blade width of 6.5 mm and a thickness of 2.5 mm (oblique bevel) # 3: hair blade - blade with a blade width of 4.2 mm and a height of 6.3 mm (oblique bevel) # 4: hair blade - blade with a blade width of 2.7 mm and a height of 6.3 mm (oblique bevel) When ordering 1 piece you will receive 1 blade of the selected version.

Craft Japan Hole Punches Ø 0,6 - 30 mm High-quality, polished hole punches for leather or similar materials. Please use a hard base and a suitable hammer (no metal hammer, risk of splintering) see accessories. Available options:No. 2 = Ø 0,6 mmNo. 3 = Ø 0,9 mmNo. 4 = Ø 1,2 mmNo. 5 = Ø 1,5 mmNo. 6 = Ø 1,8 mmNo. 7 = Ø 2,1 mmNo. 8 = Ø 2,4 mmNo. 10 = Ø 3,0 mmNo. 12 = Ø 3,6 mmNo. 15 = Ø 4,5 mmNo. 18 = Ø 5,5 mmNo. 20 = Ø 6,0 mmNo. 25 = Ø 7,5 mmNo. 30 = Ø 9,0 mmNo. 35 = Ø 10,5 mmNo. 40 = Ø 12,0 mmNo. 50 = Ø 15,0 mmNo. 60 = Ø 18,0 mmNo. 70 = Ø 21,0 mmNo. 80 = Ø 24,0 mmNo. 90 = Ø 27,0 mmNo. 100 = Ø 30,0 mm When ordering 1 piece you will receive 1 Craft Japan round hole punch of the chosen size.

Craft Japan Oblong Hole Punch (in 4 different sizes) High quality and manufactured with Japanese precision. For punching elongated holes into leather, cardboard, rubber, etc. to e.g. pull a strap through. The punches are already very sharp and allow an easy use in your work. Precise long holes are the result. The non-lacquered cut edges are durable and can be easily resharpened. Please use a suitable cutting surface to avoid dulling of the tool and a suitable hammer for punching (no steel hammer, risk of splintering) see accessories. Available options:#4 12 x 2 mm#5 15 x 2.5 mm#6 18.5 x 3 mm#7 21 x 3.5 mm When ordering 1 piece you will receive 1 Craft Japan oblong hole punch of the selected size.

Craft Japan Oval Punches For punching oval holes in leather or similar materials. Please use a suitable base for punching, e.g. hard rubber or hardwood board and use a wood or nylon head tooling hammer, see accessories. Available options:- Ø 3.6 mm: oval width 4.0 mm x oval height 3.0 mm- Ø 4.7 mm: oval width 5.0 mm x oval height 3.5 mm- Ø 5.7 mm: oval width 6.0 mm x oval height 4.5 mm If you order 1 piece, you will receive 1 oval hole punch of the chosen size.

Cutting mat / work pad in 3 different sizes. High-quality cutting mat for precise and non-marking cuts. 3 - layer sandwich construction with hard core. One side is black, the other side is green. Printed on both sides with 10 and 50 mm pitch, as well as a fine grid. Professional version. Available options:small: length 450 mm / width: 300 mm / thickness: 3 mmlarge: Length: 600 mm / width: 450 mm / thickness: 3 mmextra large: length: 900 mm / width: 600 mm / thickness: 3 mm

Damascus round knife Round knife made of Damascus steel with excellent sharpness and edge retention. Especially suitable for thicker leathers (vegetable tanned leather, belt shoulders, water buffalo croupons, etc.). Can also be used for skiving (thinning) the leather edges. Please use a cutting board or a cutting mat for cutting. Total length 160 mm / blade length approx. 120 mm / handle - Ø approx. 30 mm Blade hardness: HRC 60+/-2

Der Mann und seine Axt, by Carsten Bothe (in German language) An ax in the house saves the carpenter, but which ax is the right one?The ax, one of the oldest tools of mankind, is enjoying great popularity thanks to the current Bushcraft movement. An ax is a highly specialized tool, which is also reflected in the variety of its forms. Outdoor professional Carsten Bothe shows the different types of axes and hatchets, explains their manufacture and the right techniques for sharpening, handle inserting and caring. With a lot of know-how and practice-oriented tips you will learn the correct handling and selection of the ax for different types of wood and different tasks. For anyone working with an ax in the forest, cutting their own firewood, a tree, collecting axes, or learning about the history and handling of various axes. The following areas are addressed: Purchase advice (The development of the ax, choice of the right ax ...) Handling (protective clothing, safe handling of the ax, physics and mechanics) Felling and processing trees (dangers, cutting a tree, de-limbing the tree trunk ...) care and repair (care and storage, sharpening an ax, grinding on the way ...) The book is the ideal complement to our Hultafors axes and hatchets.This book was published in 2017 by Heel Verlag. ISBN 978-3-95843-177-5

Transparent, 3 mm thick acrylic template stencil for marking or cutting 9 different design corners/edges. Dimensions: Length: 160 mm Width: 110 mm Thickness: 3 mm

Detail - PunchPunch - round cross-section with Ø 0.3 mm.Tool for punching very fine holes or for marking seam lines on leather. This punch works similar to an awl, no material is punched out but displaced.Please be sure to use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to prevent damage to the tool, see accessories.Please make sure that the tool is not tilted when hitting (always hit it vertically with the hammer) to prevent breakage.

Diamond needle file knife-shaped 140 mm cross-section 5 x 2 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.

Diamond needle file round shaped 140 mm cross-section Ø 3,0 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.

Diamond needle file semicircular shape 140 mm cross-section 5 x 2 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.

Diamond needle file square shaped 140 mm cross-section 3 x 3 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.

Diamond needle file triangular shaped 140 mm cross-section 4 x 4 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.

Leatherblank for a DIY - BeermatVegtan, natural leather can be carved, stamped and dyed to your taste.Size: 11,5 x 9,8 cmThickness: 1,9 - 2,2 mm

Leatherblank for a DIY - Drip matVegtan, natural leather can be carved, stamped and dyed to your taste.Size: 9,0 x 9,0 cmThickness: 3,0 mm (+/- 0,2 mm)

Leatherblank for a DIY - Drip matVegtan, natural leather can be carved, stamped and dyed to your taste.Diameter: 9,0 cmThickness: 3,0 mm (+/- 0,2 mm)

Mit den Ecken-Rundeisen lassen sich mit wenig Aufwand perfekte Radien an Lederkanten erstellen. Für gute Ergebnisse und Schonung der Werkzeuge verwenden Sie bitte eine geeignete Stanzunterlage aus Kunststoff (z.B. Rickert Stanzunterlage) und einen Schonhammer (aus Kunststoff, Holz oder Rohhaut). Bitte beachten Sie für die Größenermittelung Abbildung 4.   Ecken-Rundeiesen ( Corner Round Punch )   Ø 5mm (R 2,5) A: 1,0 mm x B: 4,0 mm Ø 7 mm (R 3,5) A: 1,2 mm x B: 6,0 mm Ø 10 mm (R 5,0) A: 1,8 mm x B: 7,0 mm Ø 15 mm (R 7,5) A: 2,2 mm x B: 11,5 mm Ø 20 mm (R 10,0) A: 3,2 mm x B: 14,5 mm Ø 25 mm (R 12,5) A: 4,0 mm x B: 18,5 mm Ø 30 mm (R 15,0) A: 4,7 mm x B: 22,5 mm Ø 40mm (R 20,0) A: 6,2 mm x B: 29,5 mm Ø 50mm (R 25,0) A: 7,0 mm x B: 36,0 mm          

Leather modeler for shaping leather. This modeling tool is particularly suitable for drawing narrow lines and for shaping tooled edges (large diamond shaped spoon / angled tip).

Leather modeler for shaping leather. This modeling tool is particularly suitable for drawing narrow lines and for shaping tooled edges (large rounded / angled tip spoon).

Leather modeler for shaping leather. This modeling tool is particularly suitable for drawing narrow lines and for shaping tooled edges (Pointed Spoon / Angled Tip).

Leather modeler for shaping leather. This modeling tool is especially suitable for drawing narrow lines, shaping tooled edges and smoothing surfaces (small rounded spoon / angled tip).

Leather modeler for shaping leather. This modeling tool is particularly suitable for drawing narrow lines and for shaping tooled edges (small rounded / straight-topped spoons).

Leather modeler for shaping leather. This modeling tool is particularly suitable for modeling parallel lines / boundaries and for "lifting" a tooled edge. (Undercut / Fork).

Leather modeler for shaping leather. This modeling tool is particularly suitable for drawing narrow lines and "lifting" tooled edges (undercut / angled tip).

Edge Sanding Stick When sewing several pieces of leather together, often an offset of the edges is unavoidable. By using the sanding stick, you can easily prepare your leather edges for smoothing with an edge polisher or dyeing with an edge color. It can also be used to roughen the leather on splices. The edge sanding stick is equipped with a coarse and a fine grain and has a flexible synthetic material core. The abrasive layers lie on a foam layer to ensure a soft, non-rigid grinding process. Dimensions: Length: 178 mm Width: (26 mm, 16 mm) Height: 4 mm,Radius of the rounding on the short side: 8 mm When ordering 1 piece you will receive 2 edge sanding sticks.

Big Embossing Wheel by Sergey Neskromniy. Big beechwood handle combined with big rollers allows powerful, controlled embossing with both hands.Handlelength: l = 34 cm Diameter of roller: d = 40 mm Width of roller: #1: 5 mm#2: 7 mm More rollers and designs available on request.

Embossing Wheel 6mm. Includes embossing wheel only. Embossing wheels for leather decoration. To emboss the leather, please moisten the surface with a sponge and lukewarm water (surface must be absorbent). Then emboss with strong equal pressure. Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish (surface will be dirt and water repellent). Please select the desired shape / article number from the pictures. For the use of the embossing wheel, an embossing carriage is required, which is separately available under accessories. Also suitable in combination with: RW_OSW or RW_POSW! Attention! These embossing wheels are NOT suitable for the Osborne embossing carriage! When ordering 1 piece you will receive 1 embossing wheel of 6mm width of the chosen shape.

English Point Strap End Punches For cutting even ends on belts and straps. Available options:- Max. width 12.5 mm- Max. width 19.0 mm- Max. width 26.0 mm- Max. width 32.0 mm- Max. width 38.0 mm- Max. width 45.0 mm When ordering 1 piece you will receive 1 English point strap end punch of the selected size.

Ergonomic Swivel Knife Swivel knife with height-adjustable saddle for pre-cutting leather before tooling or for cutting patterns and images into leather. Interchangeable blade. Also available: edge guide for the swivel knife. You can get replacement blades, ceramic blades and other exchangeable blades here. For sharpening the steel blades, we recommend our sharpening tool. Dimensions:Total length: 93 mmShank size - diameter: 5.5 mm Included blade:Blade length 17.5 mmBlade width 9.5 mmBlade thickness 2.0 mm

Ersatzklinge für Leder - Spaltmaschine (Mini). Klingenlänge 149 mm, Gesamtlänge 154 mm  

Fitting - Removal - Tool - (Set of four differnt sized anvils and a punch)This tool is used for removing snaps and caped hollow rivets in most common sizes. No more use of tangs, screwdrivers or drillbits to remove damaged snaps or rivets, risking injuries or damages of your leathergoods.Please use a non-steal-hammer - such as plastik, wood or rawhide to preserve the punch from damage.

Glasses Case - DIY-KIT made of vegtan natural cowhide.Contains all necessary leatherparts and a set of magnets, so there is only addititional need for glue, yarn and some basic tools. Feel free to decorate or dye as you please.What you get:- main piece 1,8-2,0 mm leather- 2 reinforcement patches 1,5 mm- 4 leather-triangles for the nose bridge- 2 discshaped magnet for glue/sewingGlasses not included!Requiered tools and goods:- leatherglue- needles- yarn- scratchawl- stitching awlOptional tools:- French edger- Edge beveler- Creaser- Polishing stick

Hair Tool Hair line tool for cutting parallel "haircuts" into the leather (applicable, for example, when tooling animals/plants (lions, eagles, bears, grass, etc.). Interchangeable blades. Blade size (R): 6.3 x 2.7 mm Blade size (L): 6.3 x 4.2 mm Shank diameter: 5.5 mm

Product information "Hole Punch for Watchstraps - Premium" Three oblong holes in a row especially for watchstraps.- 1.8 mm holes- Distance between holes  4,5 mm - Holecenter to holecenter 7 mm - Totallength 125 mm - Handlelength 85 mm

Liebe Freunde des Lederhandwerks, für alle die noch tiefer in das Thema der künstlerisch-handwerklichen Lederbearbeitung eintauchen möchten, gezielt Techniken erlernen, vertiefen und verfeinern möchten, bieten wir exklusive Individualworkshops an. Einen ganzen Kurstag lang steht Dir unser Kursleiter Marcus Grabe mit Rat und Tat zur Seite. So kannst Du von seinem Wissensschatz profitieren, mit ihm zusammen ein Wunsch - Lederthema bearbeiten oder gezielt Techniken in der 1 zu 1 Situation erproben. Themen und Termine nach vorheriger Absprache.Telefonisch: Montag - Freitag 9:00 - 17:00 unter 09123 - 990973Email: info@rickert-werkzeug.de Das Werkzeug unserer Kurswerkstatt steht Dir natürlich zur Verfügung, die Materialkosten berechnen wir nach dem tatsächlichen Verbrauch. Für Getränke und einen kleinen Mittagsimbiss ist gesorgt. Kursdauer: 9:00 - 17:00 Uhr Wir empfehlen geeignete Arbeitskleidung für den Verlauf des Kurses zu tragen.Preis: 499,-- Euro (enthält Referentenhonorar/Tagessatz für einen Teilnehmer, Getränke und Mittagsimbiß) zzgl. Materialkosten nach tatsächlichem Verbrauch.

Gestaltung mit Farbe - Lederoberflächen mit Farbe individuell gestalten! Ziel des Kurses ist es vegetabil gegerbtes, unbehandeltes Leder mit Farbe individuell zu gestalten. Neben den nötigen theoretischen und praktischen Grundlagen steht das persönliche Ausprobieren im Vordergrund und bildet die Basis für einen unbeschwerten Umgang mit Lederfarben. Termin: 05.09.2026Kernzeiten: 10:00 Uhr - 17:00 Uhr. (Das Kursende kann sich je nach Fortschritt auch in die Abendstunden verlängern)Teilnehmerzahl: ca. 10 PersonenVorkenntnisse: keine, für Einsteiger geeignetReferent: Marcus Grabe Kursinhalte:- Ledervorbereitung- einfache Punzierung mit Musterstempeln- Flächenfärbung mit Schwamm- Detailfärbung mit Wollpinsel / Haarpinsel- Blockfärbung mit Farbverlauf/Schattierung- Anwendung von Antiquefarben und Farbblocker- Finish und Versiegelung- Kantenversäuberung (brechen, komprimieren, schleifen)- verschiedene Arten von KantenfärbungTheorie:- kurze Lederkunde- Unterschiede der FarbsystemeVeranstaltungsort: Rickert Werkzeuge, Neunkirchener Straße 56, D-91207 Lauf an der Pegnitz (Bayern) Kurskosten je Teilnehmer für Tages - Seminar "Leder färben" - € 99,- inkl. Material, warmem Mittagsimbiß und Getränken vor Ort. - Mit dem Kauf dieses Artikels sicherst Du Dir den Kursplatz zum oben angegebenen Termin. - Wir behalten uns vor, nicht ausgebuchte Kurse abzusagen, bzw. auf einen Alternativtermin auszuweichen. Ist ein Alternativtermin nicht möglich, erstatten wir die Kurskosten.Material (im Kaufpreis enthalten):- Musterstücke Rindleder (vegetabil gegerbt)- Verbrauchsmaterial (Farbe und Finish)Alle erforderlichen Werkzeuge stehen Dir für den Kurs vor Ort zur Verfügung. Wir empfehlen geeignete, schmutzunempfindliche Arbeitskleidung für den Verlauf des Kurses zu tragen.Impressionen unserer vergangenen Handwerkskurse und Seminare findest Du unter: www.scharfes-werkzeug.de

Jeweler`s Rouge, 50 gr. in 5 different grits Please apply the jeweler's rouge to a piece of thin cardboard (e.g., photo cardboard), leather, or our strop board. It is not necessary to dilute these or to change their consistency. Simply take the piece of abrasive paste wrapped in paper out of the plastic tube and tear off a piece (about 1 cm) of the paper around it. Now pull the blade to be sharpened, at a uniform angle and moderate pressure over the applied jeweler's rouge. The result is a dark grinding abrasion. We recommend our sharpening tool for our swivel knife blades.Available options: - green (extra fine): suitable for a final high gloss polish. - white (fine): standard grit, suitable for polishing and resharpening between operations of knives and swivel knife blades. - red (medium): suitable for grinding slightly blunt knives and swivel knife blades. - brown (coarse): suitable for regular sanding and the removal of light scratches and rust marks from knives and swivel knife blades. - gray (extra coarse): suitable for coarse pre-sharpening of heavily rusted knives and swivel knife blades. When ordering 1 piece, you will receive 1 abrasive paste of the selected grit grade.

Kit - Long Wallet (7 compartments) This kit comes with all items neede for the production of this wallet with snap-button closure in "Half Dollar" look and a chain ring. The leather is pre-cut to fit and can be assembled with the aid of the well-illustrated construction manual.The leather used is natural, untreated, vegetable tanned cowhide and thus completely dyeable and hallmarked to your liking. Size of the finished purse: 19 x 9,5 x 2 cm The kit consists of the following items (included): 11 leather - single parts (punched) 1 chain ring (nickel plated) 1 push-button in "Half Dollar" look 1 illustrated instructions (written in English and Japanese) 1 template for making your own stencils 1 illustrated instructions for sewing leather (written in Japanese only) Suggested tools and accessories (not included): Edge Burnisher Seam Groover with edge guide Braiding Chisel (diamond-shaped tip) 2 prongs Braiding Chisel (diamond-shaped tip) 4 prongs Wodden Mallet Cutter / carpet knife Awl Edge Beveler size 2 3.0 mm, 3.5 mm & 4.5 mm round hole punch Universal snap-button - setting tool Cutting board Awl haft Edging sanding stick Waxed leather thread Sewing needles Contact adhesive

Lace Maker Cut your own leather straps, lace and cords in various widths, also suitable for chrome and vegetable tanned leather, up to 3.0 mm thickness. Comes with an English illustrated user manual. Removable blades, thus 8 sizes possible: - 3.0 x 3.5 and 3.0 x 5.0 mm- 2.5 x 2.5 and 2.5 x 4.0 mm- 2.5 x 2.0 and 2.5 x 3.5 mm- 2.0 x 1.5 and 2.0 x 3.0 mm Replacement blades are available here. We recommend kangaroo leather for braiding with leather straps (available in the shop here).

Professional Hi-Tech Leather Splitter Solid construction made of cast iron, weight approx. 5.0 kg, max. splitting width of the leather 145 mm. To ensure that the machine is secure, we recommend to affix it on your workbench with 4 screws (not included). The thickness to be split can be set with the thumbscrew on the top right and left. With the wooden handle, the roll is raised until the depth to be split is reached. The large adjusting screw on the left fixes the roller.