GIARDINI - MAXEDGE™ Pro Iridescent Gloss

Product information "GIARDINI - MAXEDGE™ Pro Iridescent Gloss"

GIARDINI - MAXEDGE™ Pro Iridescent Gloss

Edge sealing / edge varnish

Our MAXEDGE™ Pro Iridescent Gloss are available in in 4 iridescent metallic colours. It is a protective finish for MAXMATT™ and MAXEDGE™ Pro edge paints. MAXEDGE™ Pro Iridescent Gloss dries shiny and covers the already dyed/painted leather edge with a rubber like, hard to remove paint application that is still soft and flexible. MAXEDGE™ Pro Iridescent Gloss is only suitable as a protective finish for MAXMATT™ or MAXEDGE™ Pro edge paints.

Attention! -- To obtain the Iridescent effect it is always necessary to apply a black Giardini Edge Paint as base, in order to enhance the visibility of this effect.--

Excellent features:

  • VOC reduced (volatile organic compounds)
  • waterproof if dried out
  • very abrasion, cut and scratch resistant
  • rubbery paint application
  • non-fading
  • very flexible (paint does not break during movement)
  • soft edge when dried out (no rough, protruding leather fibres which reduce the feeling of a pleasant edge)
  • subsequent polishing is not necessary

Consistency: viscous

Important!:

  • Use the MAXEDGE™ Pro Protecting Gloss exclusively for leather edges painted with MAXMATT™ and MAXEDGE™ Pro edge paints.
  • Edge paints are not suitable for colouring grain or flesh side of the leather.
  • Please always test on a sample before applying on the actual work piece. So unpleasant results can be avoided in advance.
  • Do not leave the bottle standing in the air for too long.
  • Store the product at consistent temperatures.
  • Use within 6 months after opening

Application:

  1. Prepare the leather edge for dyeing by sanding it with a fine sandpaper or smoothing the edge with an edge burnisher.
  2. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly.
  3. Apply the edge paint with a brush, wool dauber or our edge roller onto the leather edge painted with black MAXMATT™ or MAXEDGE™ Pro edge paints.
  4. Wait for about 40 minutes until the MAXEDGE™ Pro Protecting Gloss has dried.
  5. After about an hour, the edge paint has completely dried and adheres firmly to the edge. A subsequent polishing is not necessary.

Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Farb- / Pflege- / Klebertyp: Edge dye

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Shopbewertung - rickert-werkzeug.de