Rivets & Decorative Rivets

Screw Rivets / Chicago Screws Are screwed from the back. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (4 mm) from our range. Material:Head: zinc alloy (contains nickel)Screw: iron (contains nickel) Measurements:Head - Ø: 9 mmNeck - Ø: 4 mmNeck - length: 10 mm Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Screw Rivets / Chicago Screws Are screwed from the back. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (4 mm) from our range. Material:Head: zinc alloy (contains nickel)Screw: iron (contains nickel) Measurements:Head - Ø: 9 mmNeck - Ø: 4 mmNeck - length: 5 mm Available Colors:- Gold- Silver- Antique brass- Nickel-blackened- Antique-Silver- Antique-Copper- Antique-Nickel Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.  

Screw Rivets / Chicago Screws Are screwed from the back. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (4 mm) from our range. Material:Head: zinc alloy (contains nickel)Screw: iron (contains nickel) Measurements:Head - Ø: 9 mmNeck - Ø: 4 mmNeck - Länge: 7 mm Available Colors:- Gold- Silver- Antique brass- Nickel-blackened- Antique-Silver- Antique-Copper- Antique-Nickel Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Copper Rivets & Burrs Can be shortened if necessary, but then again a conical bevel of the shaft is required to put on the disc. For insertion and riveting, we recommend our riveting - insertion tool. Length 19 mm, Ø shaft 3,4 mm, Ø head / disc 9,5 mm Please note our quantity discount.

Copper, Brass and Aluminium Rivets & Burrs Available in 3 different materials. Can be shortened if necessary, but the shat has to be tapered  again to put the burr on. We recommend our rivet setting tool for setting the rivet. Length 15 mm, Ø shaft 3.3 mm, Ø head / burr 9.5 mm. If you order 1 unit, you will receive 50 rivets and 50 burrs of the selected material (copper, brass, or aluminum).

Decorative Screw Rivets / Chicago screws (6 mm) Celtic Screw Rivets / Chicago Screw. Are screwed from the back. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (5 mm) from our range. Material:Head: AluminiumScrew: Aluminium Measurements:Head - Ø: 10,5 mmNeck - Ø: 5 mmNeck - length: 6 mmsuitable for min. 6 mm, max. 9 mm leather thickness Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Decorative Screw Rivets / Chicago screws (7 mm) Floral, in 2 different colors. Screw Rivets / Chicago Screw. Are screwed from the back. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (4.5 mm) from our range. Material:Head: BrassScrew: Brass Measurements:Head - Ø: 10,5 mmNeck - Ø: 4,5 mmNeck - length: 7 mmsuitable for min. 7 mm, max. 10 mm leather thickness Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Domed Rivets Heavily domed rivets for decorating leatherwork in 4 different sizes und 3 different colors. Important: For the insertion of these rivets the right insertion tool is required for each size. You can find this here or under accessories. Dimensions:- 7,0 mm: Head- and feet - Ø: 7 mm / neck - Ø: 3 mm / neck length: 6,5 mm / hole needed: 3 mm / suitable for max. 3 mm thick leather- 10 mm: Head- Ø: 10 mm / feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 6,5 mm / hole needed: 3 mm / suitable for max. 3 mm thick leather- 13 mm: Head- Ø: 13 mm / feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 8 mm / hole needed: 3 mm / suitable for max. 3 mm thick leather- 16,0 mm: Head- Ø: 16 mm / feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 8 mm / hole needed: 3 mm / suitable for max. 3 mm thick leather When ordering 1 piece you will receive 100 rivets of the selected version. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Double cap rivet setter - setting tool for rivets with a cap diameter of 9 mm Consisting of a small anvil and a rivet setter. The anvil has a straight and a concave face (suitable for round head and double round head rivets). The rivet setter has a concave face (in the radius of the double cap rivets) and can be used for rivets with a cap diameter of up to 9 mm.

Double Cap Rivets,  available in 7 different colors and different neck lengths. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (4 mm) from our range. Please use our Rivet Setter Tool IV_8056-00.8100-00 to set the rivets.. Dimensions:- 6 mm: Head- and feet - Ø: 6,0 mm / neck - Ø: 2,8 mm / neck length: 6,2 mm / suitable for max. 2,5 mm thick leather- 7 mm: Head- and feet - Ø: 7,0 mm / neck - Ø: 2,8 mm / neck length: 7,2 mm / suitable for max. 3,5 mm thick leather- 9 mm: Head- and feet - Ø: 9,0 mm / neck - Ø: 2,8 mm / neck length: 8,5 mm / suitable for max. 6,0 mm thick leather- 12 mm: Head- and feet - Ø: 9,0 mm / neck - Ø: 2,8 mm / neck length: 11,7 mm / suitable for max. 9,0 mm thick leather- 15 mm: Head- and feet - Ø: 9,0 mm / neck - Ø: 2,8 mm / neck length: 14,7 mm / suitable for max. 11,0 mm thick leather When ordering 1 piece you will receive 100 rivets of the selected version. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Double Cap Rivets "floral" (gold) available in 3 different sizes. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (4 mm) from our range. Please use our Rivet Setter Tool IV_8056-00.8100-00 to set the rivets. Dimensions:- small: Head- and feet - Ø: 7 mm / neck - Ø: 3 mm / neck length: 7 mm / suitable for max. 4 mm thick leather- medium: Head- and feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 9 mm / suitable for max. 6 mm thick leather- large: Head- and feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 12 mm / suitable for max. 9 mm thick leather When ordering 1 piece you will receive 100 rivets of the selected version. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Double Cap Rivets "floral" (silver) available in 3 different sizes. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (3 mm) from our range. Please use our Rivet Setter Tool IV_8056-00.8100-00 to set the rivets. Dimensions:- small: Head- and feet - Ø: 7 mm / neck - Ø: 3 mm / neck length: 7 mm / suitable for max. 4 mm thick leather- medium: Head- and feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 9 mm / suitable for max. 6 mm thick leather- large: Head- and feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 12 mm / suitable for max. 9 mm thick leather When ordering 1 piece you will receive 100 rivets of the selected version. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Double Cap Rivets "star" (gold) available in 3 different sizes. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (3 mm) from our range. Please use our Rivet Setter Tool IV_8056-00.8100-00 to set the rivets. Dimensions:- small: Head- and feet - Ø: 7 mm / neck - Ø: 3 mm / neck length: 7 mm / suitable for max. 4 mm thick leather- medium: Head- and feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 9 mm / suitable for max. 6 mm thick leather- large: Head- and feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 12 mm / suitable for max. 9 mm thick leather When ordering 1 piece you will receive 100 rivets of the selected version. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Double Cap Rivets "star" (silver) available in 3 different sizes. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (3 mm) from our range. Please use our Rivet Setter Tool IV_8056-00.8100-00 to set the rivets. Dimensions:- small: Head- and feet - Ø: 7 mm / neck - Ø: 3 mm / neck length: 7 mm / suitable for max. 4 mm thick leather- medium: Head- and feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 9 mm / suitable for max. 6 mm thick leather- large: Head- and feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 12 mm / suitable for max. 9 mm thick leather When ordering 1 piece you will receive 100 rivets of the selected version. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Double Cap Rivets (6 mm) available in 3 different sizes. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (3 mm) from our range. Please use our Rivet Setter Tool IV_8056-00.8100-00 to set the rivets. Dimensions: Head - Ø 9,0 mm / neck - Ø 3,0 mm / neck - length 6 mm / suitable for max. 3,0 mm thick leather Available Colors:- Silver- Browned- Antique brass

Feet for Bag (Ø 15 mm) in 3 different colors, (4 pcs.) For insertion on undersides of bags or suitcases to protect the underside of the workpieces. Measurements:- Head Ø: 15 mm- head height: 8 mm- foot length: 18 mm / 21 mm- Required hole size: 5 mm Available colors:- Silver (nickel plated)- Gold (brass plated)- Antique brass - If you order 1 piece, you will receive a pack of 4 rivets.

Fitting - Removal - Tool - (Set of four differnt sized anvils and a punch)This tool is used for removing snaps and caped hollow rivets in most common sizes. No more use of tangs, screwdrivers or drillbits to remove damaged snaps or rivets, risking injuries or damages of your leathergoods.Please use a non-steal-hammer - such as plastik, wood or rawhide to preserve the punch from damage.

Mini Double Cap Rivets (Nickel Plate) Please use to set the rivets our 6 mm Double Cap Rivet Setter – Setting Tool IV_8100-01.8056-00. Dimensions:Head- and feet - Ø: 4,8 mm / neck - Ø: 2 mm / neck length: 3,8 mm / hole needed: 2 mm / suitable for max. 1,5 mm thick leather When ordering 1 piece you will receive 100 Mini Double Cap Rivets.

Osborne Rivets Setting Tool For setting and pressing copper rivets, e.g. our copper rivet OSB # 1700-12. Please allow at least 2 mm excess of the shaft before riveting. Total length 114 mm.

Parachute Rivets Heavily domed rivets for decorating leatherwork in 3 different sizes. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (2 mm) from our range. Please use our Rivet Setter Tool to set the rivets. Dimensions:- 7,8 mm: Head- Ø: 7,8 mm / feet- Ø: 8 mm / neck - Ø: 2 mm / neck length: 7 mm / suitable for max. 4 mm thick leather- 9,2 mm: Head- Ø: 9,2 mm / feet- Ø: 8 mm / neck - Ø: 2 mm / neck length: 7 mm / suitable for max. 4 mm thick leather- 11 mm: Head- Ø: 11 mm / feet- Ø: 8 mm / neck - Ø: 2 mm / neck length: 7 mm / suitable for max. 4 mm thick leather When ordering 1 piece you will receive 6 rivets of the selected version.

Rapid Rivets "Vintage", in 3 different colors and 3 different neck lengths. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (3 mm) from our range. Please use our Rivet Setter Tool to set the rivets. Dimensions:- 7 mm / Head- and feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 7 mm / suitable for max. 4,0 mm thick leather- 9 mm / Head- and feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 9 mm / suitable for max. 6,0 mm thick leather- 12 mm / Head- and feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 12 mm / suitable for max. 9,0 mm thick leather When ordering 1 piece you will receive 100 rivets of the selected version. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Rivets Setting Tool For setting and pressing our Copper, Brass and Aluminium Rivets & Burrs. Please allow at least 2 mm excess of the shaft before riveting. Total length 115 mm.

Single Cap Rivets 12,0 mm available in 4 different colors. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (3 mm) from our range. Dimensions: Head- and feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 12 mm / suitable for max. 9,0 mm thick leather. Available Colors:- Gold- Silver- Antique brass- Antique nickel When ordering 1 piece you will receive 100 rivets of the selected version. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Single Cap Rivets 7,0 mm available in 4 different colors. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (3 mm) from our range. Dimensions: Head- and feet - Ø: 7 mm / neck - Ø: 3 mm / neck length: 7 mm /suitable for max. 4,0 mm thick leather. Available Colors:- Gold- Silver- Antique brass- Antique nickel When ordering 1 piece you will receive 100 rivets of the selected version. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Single Cap Rivets 9,0 mm available in 4 different colors. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (3 mm) from our range. Dimensions: Head- and feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 9 mm / suitable for max. 6,0 mm thick leather Available Colors:- Gold- Silver- Antique brass- Antique nickel When ordering 1 piece you will receive 100 rivets of the selected version. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Spike "Skull" Nickel plated steel. The spike is riveted from the back. Suitable for leather with a thickness of up to 4.5 mm. Total length: 29 mm / Ø : 9 mm / hole needed: 3,5 mm  When ordering 1 piece you will receive 6 spikes.

Spikes, (Round Rivetback) Nickel plated steel. The spike is riveted from the back. Suitable for leather with a thickness of up to 6.0 mm. - large: total length: 29,5 mm / Ø : 9,5 mm / hole needed: 4,0 mm When ordering 1 piece you will receive 10 spikes of the selected version.

Textured Single Cap Rivets, in 4 different colors and 3 ifferent neck lengths. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (3 mm) from our range. Available Sizes:- 5 mm / Head- and feet - Ø: 6 mm / neck - Ø: 3 mm / neck length: 5 mm / suitable for max. 2,5 mm thick leather (use the 6 mm Double Cap Rivet Setter – Setting Tool)- 7 mm / Head- and feet - Ø: 7 mm / neck - Ø: 3 mm / neck length: 7 mm / suitable for max. 4,0 mm thick leather (Universal Setting Tool)- 9 mm / Head- and feet - Ø: 9 mm / neck - Ø: 3 mm / neck length: 9 mm / suitable for max. 6,0 mm thick leather (Universal Setting Tool) Available Colors:- Gold- Silver- Antique brass- Antique nickel When ordering 1 piece you will receive 100 rivets of the selected version. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Tubular Rivets (Steel, Brass Plated) available in 3 different sizes. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (3 mm) from our range. To insert the rivets you need our Tubular Rivet Setter / Setting Tool. Available sizes:- Small: Total length 9,5 mm / neck length 8,0 mm / head - Ø 8,0 mm / neck - Ø 3,2 mm- Medium: Total length 12,5 mm / neck length 11,0 mm / head - Ø 8,0 mm / neck -Ø 3,2 mm- Large: Total length 15,5 mm / neck length 14,0 mm / head - Ø 8,0 mm / neck -Ø 3,2 mm When ordering 1 piece you will receive 100 rivets of the selected version.

Tubular Rivets (Steel, Copper Plated) available in 3 different sizes. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (3 mm) from our range. To insert the rivets you need our Tubular Rivet Setter / Setting Tool. Available sizes:- Small: Total length 9,5 mm / neck length 8,0 mm / head - Ø 8,0 mm / neck - Ø 3,2 mm- Medium: Total length 12,5 mm / neck length 11,0 mm / head - Ø 8,0 mm / neck -Ø 3,2 mm- Large: Total length 15,5 mm / neck length 14,0 mm / head - Ø 8,0 mm / neck -Ø 3,2 mm When ordering 1 piece you will receive 100 rivets of the selected version.

Tubular Rivets (Steel, Nickel Plated) available in 3 different sizes. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (3 mm) from our range. To insert the rivets you need our Tubular Rivet Setter / Setting Tool. Available sizes:- Small: Total length 9,5 mm / neck length 8,0 mm / head - Ø 8,0 mm / neck - Ø 3,2 mm- Medium: Total length 12,5 mm / neck length 11,0 mm / head - Ø 8,0 mm / neck -Ø 3,2 mm- Large: Total length 15,5 mm / neck length 14,0 mm / head - Ø 8,0 mm / neck -Ø 3,2 mm When ordering 1 piece you will receive 100 rivets of the selected version.

Setting tool for all standard double cap rivets and pushbuttons (Line 20 and Line 24 / small & large) 6 - piece set consisting of an anvil with a straight and 4 concave faces (Ø 8.0 mm, 10.5 mm, 13.0 mm, 15.5 mm) for rivets and pushbuttons in all common sizes, as well as 5 punches for corresponding rivet or push-button tops. Please use a suitable hammer (not a steel hammer) to avoid damaging the tools.

Wide Double Cap Rivets, in 6 different colors and 3 different neck lengths. For punching the holes in the leather, we recommend a revolver punch (various types available), punch set or a round hole punch (4 mm) from our range. Please use our Rivet Setter Tool IV_8105-00 to set the rivets.Dimensions:- 7 mm: Head- and feet - Ø: 13,2 mm / neck - Ø: 4,0 mm / neck length: 6,8 mm / suitable for max. 3.5 mm thick leather- 9 mm: Head- and feet - Ø: 13,2 mm / neck - Ø: 4,0 mm / neck length: 8,6 mm / suitable for max. 6,0 mm thick leather- 12 mm: Head- and feet - Ø: 13,2 mm / neck - Ø: 4,0 mm / neck length: 11,7 mm / suitable for max. 9,0 mm thick leather When ordering 1 piece you will receive 100 rivets of the selected version. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.