Leather Tools Surface

Steel Ruler, 150 mm / 300 / 600 mm

Stainless Steel Ruler, 150 mm / 300 / 600 mm Stainless steel ruler made of hardened, stainless steel with matt chrome-plated surface for glare-free reading. Top millimetre scale bottom ½-millimetre scale. Blank backside. - particularly high durability by manufacturing of hardened stainless steel.- Matt chrome surface for glare-free and safe reading.- Top millimetre division, bottom ½ - millimetre division with red decimal numbering.- Tolerance ± 0,3 mm Available options: - 150 mm (6")- 300 mm (12")- 600 mm (24")When ordering 1 piece you will receive 1 Hultafors stainless steel ruler of the chosen size.

From €2.50*

Details

Adjustable Creaser

Adjustable Creaser Creaser for marking seams or making ornaments. Infinitely adjustable by an adjusting screw. Maximum distance to the leather edge 6.5 mm / creases width 1mm.

€12.60*

Aluminium Straight Edge

Aluminium straight edge, available in 2 different lengths With a straight, high-grade stainless steel cutting edge to prevent scraping of the ruler during cutting. The rubber strips inserted in the aluminum body ensure a secure and non-slip grip on the workpiece.. Available options:Length: 30 cmLength: 50 cm

From €14.10*

Details

Blades for Swivel Knife

Blades for Swivel Knifes (price per piece) These blades are suitable for our swivel knife, ergonomic swivel knife and swivel knife sets with a shank size of 5.5 mm. (Not suitable for Barry King swivel knives.) For sharpening we recommend our sharpening tool and jeweler's rouge. Available options: # 1: normal - blade with a blade width of 12.5 mm and a thickness of 2.5 mm (straight bevel) # 2: fine - blade with a blade width of 6.5 mm and a thickness of 1.4 mm (oblique bevel) # 3: hollow ground - blade with a blade width of 9.5 mm and a thickness of 0.5 mm in the middle at the thinnest point (straight bevel) # 4: normal - blade with a blade width of 6.5 mm and a thickness of 2.5 mm (oblique bevel) # 5: normal - blade with a blade width of 9.5 mm and a thickness of 2.5 mm (straight bevel) - this is the blade coming with our standard swivel knives. # 6: hollow ground - blade with a blade width of 12.5 mm and a thickness of 1.0 mm in the middle at the thinnest point (straight bevel) # 7: hollow ground - blade with a blade width of 6.5 mm and a thickness of 1.0 mm in the middle at the thinnest point (straight bevel) # 8: hair blade - blade with a blade width of 4.2 mm and a height of 6.3 mm (oblique bevel) # 9: normal - blade with a blade width of 6.5 mm and a thickness of 2.5 mm (straight bevel) # 10: hair blade - blade with a blade width of 2.7 mm and a height of 6.3 mm (oblique bevel) When ordering 1 piece you will receive 1 blade of the selected version.

From €6.95*

Details

Bone Folder

Polished bone folders made from genuine cattle bone (the two white ones) or made frome genuine buffalo horn (the dark one). Bone folder / pointed bones for folding, bending or polishing.Please select your option:# 01: Bone folder from cattle bone, approx. 200 mm long, approx. 17 - 22 mm wide and approx. 6 mm thick. One side pointed, one rounded. Bone folder is slightly bent.# 02: Bone folder from cattle bone, approx. 200 mm long, approx. 22 mm wide and approx. 6 mm thick. Both sides around. Bone folder is slightly bent.# 03: Bone folder from buffalo horn, approx. 145 mm long, approx. 22 mm wide and approx. 3 mm thick. One side straight, one rounded. Bone folder is flat.When ordering 1 piece you will receive 1 bone folder of the selected option.

From €22.30*

Details

Brass Spacer Discs

Used for easy and precise scaling up of templates. Just place a pen or a scratch awl in the centerhole and roll along your template.Contains 6 discs with radius - R3, R4, R5, R6, R7, R10

€19.50*

Ceramic Blade for Swivel Knife

Ceramic Blade for Swivel Knife (price per piece) Re-sharpening of the blade is eliminated. Permanent sharpness and edge retention for exact cuts. These blades are suitable for our swivel knife, ergonomic - swivel knife and swivel knife - sets with a shank size of 5.5 mm Available options: # 1: normal ceramic blade with a width of 6.0 mm and 2.8 mm thick (oblique bevel) # 2: normal ceramic blade with a width of 9.5 mm and 2.6 mm thick (straight bevel) # 3: fine ceramic blade with a width of 6.0 mm and 1.6 mm thick (oblique bevel) # 4: beader ceramic blade with a width of 9.0 mm and a double bevel at 2.0 mm distance (double bevel) When ordering 1 piece you will receive 1 ceramic blade of the selected type.

From €51.60*

Details

Craft Japan Blades for Swivel Knife

Craft Japan Blades for Swivel Knives These high quality and polished blades are, with the exception of our Barry King swivel knives, suitable for all our swivel knives with a 5.5 mm blade shank. For sharpening we recommend our sharpening tool and jeweler's rouge. Available options: # 1: normal blade with a blade width of 9.5 mm and a thickness of 2.3 mm (straight bevel) # 2: hollow grounde blade with a blade width of 9.5 mm and a thickness of 2.2 mm centered at the thinnest point (straight bevel) When ordering 1 piece you will receive 1 blade of the selected version.

From €9.95*

Details

Craft Japan Blades for Swivel Knife

Craft Japan Standard Blades for Swivel Knife (price per piece) These blades are suitable for our swivel knife, ergonomic swivel knife and swivel knife sets with a shank size of 5.5 mm. (Not suitable for Barry King swivel knives.) For sharpening we recommend our sharpening tool and jeweler's rouge. Available options: # 1: fine - blade with a blade width of 6.5 mm and a thickness of 1.4 mm (oblique bevel) # 2: normal - blade with a blade width of 6.5 mm and a thickness of 2.5 mm (oblique bevel) # 3: hair blade - blade with a blade width of 4.2 mm and a height of 6.3 mm (oblique bevel) # 4: hair blade - blade with a blade width of 2.7 mm and a height of 6.3 mm (oblique bevel) When ordering 1 piece you will receive 1 blade of the selected version.

From €9.50*

Details

Craft Japan Ceramic Blade for Swivel Knife

Craft Japan Ceramic Blade for Swivel Knife (price per piece) Re-sharpening of the blade is eliminated. Permanent sharpness and edge retention for exact cuts. These blades are suitable for our swivel knife, ergonomic - swivel knife and swivel knife - sets with a shank size of 5.5 mm Available options: # 1: small ceramic blade with a width of 7.0 mm and 2.8 mm thick (oblique bevel) # 2: normal ceramic blade with a width of 9.5 mm and 2.6 mm thick (straight bevel) When ordering 1 piece you will receive 1 ceramic blade of the selected type.

From €49.95*

Details

Craft Japan Professional Swivel Knife

Craft Japan Professional Swivel Knife, with ball-bearing saddle for smooth and finest cuts. To pre-cut the leather before tooling or to cut patterns and pictures into leather. The saddle can be adjusted in height with the enclosed hex-key, so this swivel knife is adaptable to almost any hand. When properly adjusted, your hands will tire and cramp less and help you with elaborate tooling works. These versions are delivered without blade. Matching blades can be found on the following pages in our shop: Standard Blades for Swivel KnivesCeramic Blades for Swivel Knives Available options: - # narrow "S"Barrel Ø: 9.4 mmTotal length: 74 mm - 99 mmEffective adjustable height 25 mmShank - diameter: 5.5 mm- # medium "M"Barrel Ø: 11 mmTotal length: 74 mm - 99 mmEffective adjustable height 25 mmShank - diameter: 5.5 mm

From €28.00*

Details

Design Corners/Edges Template Stencil

Transparent, 3 mm thick acrylic template stencil for marking or cutting 9 different design corners/edges. Dimensions: Length: 160 mm Width: 110 mm Thickness: 3 mm

€26.40*

Edge Sanding Stick

Edge Sanding Stick When sewing several pieces of leather together, often an offset of the edges is unavoidable. By using the sanding stick, you can easily prepare your leather edges for smoothing with an edge polisher or dyeing with an edge color. It can also be used to roughen the leather on splices. The edge sanding stick is equipped with a coarse and a fine grain and has a flexible synthetic material core. The abrasive layers lie on a foam layer to ensure a soft, non-rigid grinding process. Dimensions: Length: 178 mm Width: (26 mm, 16 mm) Height: 4 mm,Radius of the rounding on the short side: 8 mm When ordering 1 piece you will receive 2 edge sanding sticks.

Content: 2 pieces (€1.85* / 1 pieces)

€3.70*

Embossing Wheel 6mm (2/8“)

Embossing Wheel 6mm. Includes embossing wheel only. Embossing wheels for leather decoration. To emboss the leather, please moisten the surface with a sponge and lukewarm water (surface must be absorbent). Then emboss with strong equal pressure. Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish (surface will be dirt and water repellent). Please select the desired shape / article number from the pictures. For the use of the embossing wheel, an embossing carriage is required, which is separately available under accessories. Also suitable in combination with: RW_OSW or RW_POSW! Attention! These embossing wheels are NOT suitable for the Osborne embossing carriage! When ordering 1 piece you will receive 1 embossing wheel of 6mm width of the chosen shape.

From €14.80*

Details

English Point Strap Ends Template Stencil

Transparent, 3 mm thick acrylic stencil for marking or cutting of English point strap ends. Suitable for straps with the following widths: - 12.70 mm (1/2") - 15.86 mm (5/8") - 19.10 mm (3/4") - 25.40 mm (1") - 31.75 mm (1 1/4") - 38.10 mm (1 1/2") - 44.45 mm (1 3/4") - 50.80 mm (2") Straps with not exactly fitting widths can still be used with this template. We recommend that you always use the next larger size on the stencil template and center it, for example, with a belt width of 38 mm, use the template size - 38.10 mm (1 1/2"). Dimensions: Length: 178 mm Width: 122 mm Thickness: 3 mm

€18.40*

Ergonomic Swivel Knife

Ergonomic Swivel Knife Swivel knife with height-adjustable saddle for pre-cutting leather before tooling or for cutting patterns and images into leather. Interchangeable blade. Also available: edge guide for the swivel knife. You can get replacement blades, ceramic blades and other exchangeable blades here. For sharpening the steel blades, we recommend our sharpening tool. Dimensions:Total length: 93 mmShank size - diameter: 5.5 mm Included blade:Blade length 17.5 mmBlade width 9.5 mmBlade thickness 2.0 mm

€52.50*

Hair Line Tool

Hair Tool Hair line tool for cutting parallel "haircuts" into the leather (applicable, for example, when tooling animals/plants (lions, eagles, bears, grass, etc.). Interchangeable blades. Blade size (R): 6.3 x 2.7 mm Blade size (L): 6.3 x 4.2 mm Shank diameter: 5.5 mm

€34.50*

Leather – Wire Brush

Leather Rougher, for roughening leather surfaces.This tool has several uses. Use it to remove old surface finishes on the leather, to roughen the surface for a certain "used-look" or to allow the leather to be roughened at splices for a firmer hold.

€55.30*

Leather – Wire Brush

€25.95*

Mini Screwdriver

Screwdriver for screws of a width starting at 2.4 mm. (Total length: 38 mm) This screwdriver is perfect for exchanging the swivel knife blades.

€4.10*

Tip

Multifunctional Wingdivider

Multifunctional Wingdivider for marking and groovingInterchangeable blades with pinpoint- and grooving-blade included. Additional mounting of ballpens, pencils, markees or silverliner.Included:- Body- Mountingadaptor small and big - Pinpointblade- Groovingblade- Allenwrench- Torxwrench

€89.00*

Osborne Bone Folder

Osborne Bone Folder Polished, genuine cattle bone folder pasting and folding and various other applications. Dimensions: Length: 160 mmWidth: 21 mmThickness: 5 mm

€31.70*

Osborne Creaser

Osborne Creaser / Edge Beader / Push Beader To create a decorative groove (crease) while rounding the edge of the leather. Available in 5 different sizes. The tools have a fixed stop whose distance reflects the respective tool size. For use, moisten the leather edge to be processed and let it dry until the leather returned to its natural colour. Now you can the creaser and work the edge several times in succession with moderate pressure. Finally, to intensify the curvature of the edge, angle the tool further towards you during use. In retrospect, the edge can still be burnished with an edge slicker or burnisher. (Under certain circumstances, the drawn groove is compressed again when using the edge slicker or burnisher, a new finish with the Osborne Creaser provides quick remedy) Alternatively: reverse the order of tool use described above. First burnish the edge with the edge slicker or burnisher, then press in the decoration with the Osborne Creaser. Advantage: This may save you possible rework. Disadvantage: On the already rounded and burnished edge, the Osborne Creaser can not perform as well as with a freshly cut edge. Please note that due to construction of the tools, especially the fixed stopper, it is difficult to work with thinner leathers. We therefore recommend the use of leathers of at least 2.2 - 2.4 mm or thicker. With thinner leathers, the edge to be worked on must be slightly underlaid (raised) to be able to produce a good impression. Available options: # 1: border width approx. 1.6 mm (1/16 Inch) # 2: border width approx. 2 mm (5/64 Inch) # 3: border width approx. 2.4 mm (3/32 Inch) # 4: border width approx. 2.8 mm (7/64 Inch) # 5: border width approx. 3.2 mm (1/8 Inch) - When you order 1 piece, you will receive one creaser each of the selected size.

From €50.25*

Details

Osborne Fitters Hammer

Osborne Fitters' Hammer The fitters' hammer is made of malleable iron. The polished hammer surfaces are used used for smoothing/tamping of seams or smoothing leather. Even freshly glued leather parts can be wonderfully pressed together with this handy tool without damaging the surface of the leather. A disturbing handle of e.g. a cobbler's hammer is eliminated. This tool is often used to press seams that have been created during turning and are to be flattened after the later everting of the workpiece on the inside. Dimensions:overall length: 11,7 cmØ- round head: 3,4 cmpointed head: 2,7 cmweight: 360 gm

€41.65*

Osborne Scratch Compass

Osborne Professional Scratch Compass Solid professional scratch compass made from high-quality tool steel with interchangeable scratch tips. The width of the compass can be adjusted with the two set screws. The first set screw mounted on the guide rail allows coarse adjustment, the second set screw provides fine adjustment. With this help, exact distances can be set. In additon to the scribe tip, 3 different sizes of scratchers are coming with this set. These are characterized by their excellent sharpness and edge retention. With these the wing divider transforms into an outstanding stitching groover in no time. Decorative circles and decorative ornamental grooves can be generated at any distance from the leather edge. Dimensions:Total length: 180 mmSpan max: 250 mm (with scribe tip)Span min: 3 mm (with scribe tip)Fine adjustment: within approx. 1.5 mm The following items are included:1x Osborne Professional Scratch Compass1x scratch tip with approx. 1.2 mm cutting width1x scratch tip with approx. 1,7 mm cutting width1x scratch tip with approx. 2,0 mm cutting width

€211.60*

Osborne Single Creaser

Osborne Single Creaser Typically Osborne, forged from excellent tool steel, for hands-free creation of a decorative grooves in leather. For use, moisten the areas to be worked on and leave them return to the original colour. Now you can start the creasing process and press the creaser several times repetitively with moderate pressure. Lines far away from the edge of the workpiece are therefore no longer a problem.

€75.95*

Parallelzwinge / Spannhand

Parallelzwinge / Spannhand Mit Trapezgewindespindel und 2 schwenkbaren Spannblöcken. Die Spannblöcke haben jeweils 3 glatte Flächen und eine Fläche mit Kreuzprisma und sind somit zum Spannen unterschiedlichster Werkstücke universell einsetzbar. Für Innen- und Aussenspannung verschiedenster Werkstückformen. Auswahlliste: 25 mm: Spannweite Druck 0 - 25 mm / Spannweite Zug 45 - 70 mm / Spanntiefe 15 mm 50 mm: Spannweite Druck 0 - 50 mm / Spannweite Zug 32 - 82 mm / Spanntiefe 30 mm 75 mm: Spannweite Druck 0 - 75 mm / Spannweite Zug 40 - 115 mm / Spanntiefe 50 mm 100 mm: Spannweite Druck 0 - 100 mm / Spannweite Zug 50 - 150 mm / Spanntiefe 60 mm

From €16.55*

Details

Tip

Precision Winddivider

Precision Winddivider - stonewashed black. Used for many tasks in leathercraft:- marking of seams- creasing decorative lines- dividing of lengthsBladelike ground and polished tips make delicate marking easy. Tips are hardened to 50 HRC. The screws locks the set width safely in place. Stonewashed finish is smooth to hand, nice to eye and will not cause reflections of light.Spanwidth: 160 mm

€69.00*

Professional Blade for Swivel Knife

Professional Blade for Swivel Knife (price per piece) These blades are suitable for our swivel knives with a 5.5 mm shank size. The blades, which are made of high-strength and cutting properties HCS 1055 glide very well through the leather, allowing easy contour guidance and minimizing the needs for re-sharpening during the respective projects.For sharpening we recommend our sharpening tool and jeweler's rouge.Available options:# 1: hollow ground blade with a blade width of 9.5 mm and a thickness of 1.8 mm, 0.9 mm in the middle at the thinnest point (straight bevel) # 2: normal blade with a blade width of 6.4 mm and a thickness of 2.3 mm (oblique bevel) # 3: hollow ground blade with a blade width of 6.4 mm and a thickness of 1.9 mm, 0.7 mm centered at the thinnest point (oblique ground) # 4: fine blade with a blade width of 6.3 mm and a thickness of 1.6 mm (oblique bevel) When ordering 1 piece you will receive 1 blade of the selected version.

From €19.95*

Details

Replacement Blade for Stitch Groover with rip fence "Pro"

Replacement Blade for Stitch Groover with rip fence "Pro" Grooving width 1mm / depth of cut with a single application approx. 0.3 mm Info: "Rickert" - tools from leather craftsmen for leather craftsmen. All tools of the series are made using traditional Japanese craft techniques. Only selected, high-quality and durable raw materials enter the production. The selected degrees of hardness of the steel are reflected in the precision, sharpness and quality of the respective tools. Each one of these products has been thoroughly tested for quality and durability and are only approved for sale after meeting our exacting standards.

€6.95*

Rickert - Blades for Swivel Knifes

Rickert - Blades for Swivel Knifes hese blades are suitable for our Leatherworker´s Finest - Swivel-Knives, as well as for all other Swivel Knifes with a shank size of 5,5 mm. For sharpening we recommend our sharpening tool and jeweler's rouge. Available options: # 0: Sheridan Ultra Thin Type Blade with a blade width of 4,7 mm and a thickness of 0,8 mm (straight bevel) geeignet für extrem feine Schnitte# 1: Sheridan Thin Type Blade with a blade width of 7,0 mm and a thickness of 1,4 mm (straight bevel) geeignet für feine Schnitte# 2: Standard Klinge with a blade width of 9,0 mm and a thickness of 2,4 mm (straight bevel)# S: Double Line Blade with a blade width of 10 mm, distance 1,8 mm (straight double bevel) suitable for double lines# M: Double Line Blade with a blade width of 10 mm, distance 2,4 mm (straight double bevel) suitable for double lines Info: "Rickert - Leatherworker's Finest" - tools from leather craftsmen for leather craftsmen. All tools of the series are made using traditional Japanese craft techniques. Only selected, high-quality and durable raw materials enter the production. The selected degrees of hardness of the steel are reflected in the precision, sharpness and quality of the respective tools. Each one of these products has been thoroughly tested for quality and durability and are only approved for sale after meeting our exacting standards. When ordering 1 piece, you will receive 1 tool of the selected type.

From €7.95*

Details

Round Corners Template Stencil

Transparent, 3 mm thick acrylic stencil for marking or cutting round corners. Subsequent inner and outer radii are shown on the template:- 5.0 mm- 6.0 mm- 7.5 mm- 10.0 mm- 12.5 mm- 15.0 mm Dimensions: Length: 93 mm Width: 93 mm Thickness: 3 mm

€13.20*

Round Strap Ends Template Stencil

Transparent, 3 mm thick acrylic stencil for marking or cutting round strap ends. Suitable for straps with the following widths: - 12.70 mm (1/2") - 15.86 mm (5/8") - 19.10 mm (3/4") - 25.40 mm (1") - 31.75 mm (1 1/4") - 38.10 mm (1 1/2") - 44.45 mm (1 3/4") - 50.80 mm (2") Straps with not exactly fitting widths can still be used with this template. We recommend that you always use the next larger size on the stencil template and center it, for example, with a belt width of 38 mm, use the template size - 38.10 mm (1 1/2"). Dimensions: Length: 144 mm WidthB: 88 mm Thickness: 3 mm

€15.00*

Sergey Neskromniy Swivel Knife "Flower"

Sergey Neskromniy Swivel Knife "Flower", for pre-cutting leather before tooling or for cutting patterns and pictures into leather. Version with ball-bearing saddle for smooth and finest tooling. The decorative brass handle clearly sets this swivel knife apart from others. The comfortable saddle can be adjusted in height with a hey key, so this swivel knife is adjustable to almost any hand. When properly adjusted, your hands will tire and cramp less and help you with elaborate tooling.Dimensions:Handle Ø: 11 mmOverall length: 76,4 mm - 92,4 mmEffective adjustable height:16 mmShank size - diameter: 5.5 mm Content:1x Swiefel Knife Barrel1x Hex key1x replacement screw These versions are delivered without blade. Matching blades can be found on the following pages in our shop: Standard Blades for Swivel KnivesCeramic Blades for Swivel Knives

€130.00*

Silver Pen

Silver lead / silver pencil with approx. 0.6 mm width. These silver mines / silver pens are excellent for both light and dark leather. The line thickness is approx. 0.6 mm in each case. There are 3 different products to choose from, of which the first 2 are ballpoint pens and the third product is a gel liner. The pen strokes can be removed with an eraser from the leather surface; the lines drawn with the gel liner can be removed with water and a cloth. Please note that silver pens / - mines should always be stored lying flat and drying should be prevented. Please also note: Depending on the type of leather, residues may remain visible on the leather. Therefore, it is recommended that the pens are not used on visible areas and are being used with caution. Use it on a remnant first to test if the markings can be removed to avoid unsightly markings. Available options: # 01: Ballpoint pen refill "Schmidt 700EH" with holder in resealable tube # 02: Ballpoint pen (incl. silver mine) size M # 03: Gel - Liner "Pilot" - silver (to be seen most clearly) When ordering 1 piece, you will receive 1 silver mine / silver pin of the selected version Expert's advice: Don't leave the marks on the leather until the ink has fully dried. It will be harder to remove them and they may become permanent. If the marks can not be removed with some water, hair spray might help.

From €2.95*

Details

Strap Ends Template Stencil

Transparent, 3 mm thick acrylic stencil for marking or cutting English point and round strap ends and for marking belt holes. Suitable for belts with the following widths:- 25,40 mm (1")- 31,75 mm (1 1/4")- 38,10 mm (1 1/2")- 44.45 mm (1 3/4")- 50.80 mm (2") Straps with not exactly fitting widths can still be used with this template. We recommend that you always use the next larger size on the stencil template and center it, for example, with a belt width of 38 mm, use the template size - 38.10 mm (1 1/2"). Dimensions: L: 228 mm W: 151 mm D: 3 mm

€28.20*

Swivel Knife Set

Swivel Knife Set Swivel knife with height-adjustable saddle for pre-cutting the leather before tooling or for cutting patterns and images into the leather. Interchangeable blades.Also available: edge guide for the swivel knife.This set includes:- 1 swivel knife- 1 blade with a width of 6.5 mm- 1 blade with a width of 7.5 mm (oblique bevel)- 1 blade with a width of 9.5 mm- 1 blade with a width of 12.5 mmYou can get replacement blades, ceramic blades and other exchangeable blades here.

€56.50*

Tip

Watch strap moulding jig

This jig faciltates the anatomical shaping of watchstraps, good for glueing multiple layers and avoiding creases on the inner layer.Dimensions:- 120 mm x 60 mm x 35 mm

€19.90*

Wing Divider

This wing divider is made of carbon steel and is finely adjustable with a set screw. The wing divider can be used for parallel scribing or, of course, marking circles on leather. Maximum adjustable radius: 165 mm (6”)

€20.30*