Button Hole Punch
For punching buttonholes into leather. Ideal for use with Sam Browne studs Ø 4 mm - Ø 8 mm.
Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.
Available options:
3.0 mm: hole - Ø 3 mm, slit length approx. 4 mm. (ideal for Sam Browne studs Ø 4 - 5 mm)4.0 mm: hole - Ø 4 mm, slit length approx. 5 mm. (ideal for attached button Ø 6 mm)5.0 mm: hole - Ø 5 mm, slit length approx. 6 mm.6.0 mm: hole - Ø 6 mm, slit length approx. 7 mm. (ideal for Sam Browne studs Ø 8 mm)7.0 mm: hole - Ø 6 mm, slit length approx. 9.5 mm. (ideal for Sam Browne studs Ø 8 mm)8.0 mm: hole - Ø 8 mm, slit length approx. 8.5 mm. (ideal for bag pocket button Ø 10 mm)11.0 mm: hole - Ø 11 mm, slit length approx. 10 mm. (ideal for attached button Ø 12-13 mm)
When ordering 1 piece you will receive 1 button hole punch of the selected size.
Craft Japan Oblong Hole Punch (in 4 different sizes)
High quality and manufactured with Japanese precision. For punching elongated holes into leather, cardboard, rubber, etc. to e.g. pull a strap through. The punches are already very sharp and allow an easy use in your work. Precise long holes are the result. The non-lacquered cut edges are durable and can be easily resharpened.
Please use a suitable cutting surface to avoid dulling of the tool and a suitable hammer for punching (no steel hammer, risk of splintering) see accessories.
Available options:#4 12 x 2 mm#5 15 x 2.5 mm#6 18.5 x 3 mm#7 21 x 3.5 mm
When ordering 1 piece you will receive 1 Craft Japan oblong hole punch of the selected size.
Craft Japan Oval Punches
For punching oval holes in leather or similar materials.
Please use a suitable base for punching, e.g. hard rubber or hardwood board and use a wood or nylon head tooling hammer, see accessories.
Available options:- Ø 3.6 mm: oval width 4.0 mm x oval height 3.0 mm- Ø 4.7 mm: oval width 5.0 mm x oval height 3.5 mm- Ø 5.7 mm: oval width 6.0 mm x oval height 4.5 mm
If you order 1 piece, you will receive 1 oval hole punch of the chosen size.
Craft Japan Riemenendeisen / Gürtelendeisen (spitz)
Zum Schlagen des gleichmässigen Abschlusses eines Riemens oder Gürtels.
Auswahlliste:
- max. Breite 25mm- max. Breite 30 mm- max. Breite 35 mm- max. Breite 40 mm
Bei einer Bestellung 1 Stück erhalten Sie 1 Riemenendeisen (spitz) der gewählten Größe.
Detail - PunchPunch - round cross-section with Ø 0,5 mm.Tool for punching very fine holes. Due to the small wall thickness of the punch, a very precise punching is possible. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to prevent damage to the tool, see accessories.Please make sure to avoid tilting when hitting (always hit it vertically with the hammer) to prevent breakage.
Detail - PunchPunch - round cross-section with Ø 0.3 mm.Tool for punching very fine holes or for marking seam lines on leather. This punch works similar to an awl, no material is punched out but displaced.Please be sure to use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to prevent damage to the tool, see accessories.Please make sure that the tool is not tilted when hitting (always hit it vertically with the hammer) to prevent breakage.
Mit den Ecken-Rundeisen lassen sich mit wenig Aufwand perfekte Radien an Lederkanten erstellen.
Für gute Ergebnisse und Schonung der Werkzeuge verwenden Sie bitte eine geeignete Stanzunterlage aus Kunststoff (z.B. Rickert Stanzunterlage) und einen Schonhammer (aus Kunststoff, Holz oder Rohhaut).
Bitte beachten Sie für die Größenermittelung Abbildung 4.
Ecken-Rundeiesen ( Corner Round Punch )
Ø 5mm (R 2,5) A: 1,0 mm x B: 4,0 mm
Ø 7 mm (R 3,5) A: 1,2 mm x B: 6,0 mm
Ø 10 mm (R 5,0) A: 1,8 mm x B: 7,0 mm
Ø 15 mm (R 7,5) A: 2,2 mm x B: 11,5 mm
Ø 20 mm (R 10,0) A: 3,2 mm x B: 14,5 mm
Ø 25 mm (R 12,5) A: 4,0 mm x B: 18,5 mm
Ø 30 mm (R 15,0) A: 4,7 mm x B: 22,5 mm
Ø 40mm (R 20,0) A: 6,2 mm x B: 29,5 mm
Ø 50mm (R 25,0) A: 7,0 mm x B: 36,0 mm
English Point Strap End Punches
For cutting even ends on belts and straps.
Available options:- Max. width 12.5 mm- Max. width 19.0 mm- Max. width 26.0 mm- Max. width 32.0 mm- Max. width 38.0 mm- Max. width 45.0 mm
When ordering 1 piece you will receive 1 English point strap end punch of the selected size.
Original Japanese Screw Punch (Screw Punch made in Japan)
Japanese patented small screw punch (original product, no imitation). Punches leather, paper, cardboard and fabrics quietly and quickly. The screw punch comes with 2 bits in sizes 2 mm and 2.5 mm. Leather up to 3.5 mm thick poses no problem for this tool.
The tool cuts into the material without crushing or squeezing it, as is the case with conventional punches. Thus also a hole just at the edge is also possible without tearing (depending on the material, try first on remnant pieces). When the tool is pressed down, the tube rotates and cuts into the material in a rotating manner.
As a support when using this tool, we recommend a cutting mat or a cutting board from our range in order to protect the sharpened tubes. To maintain the sharpness use our jeweler's paste on a strop and draw the tube against the cutting direction over it.
When ordering 1 piece you will receive:- 1 original Japanese screw punch- 1 tube 2.0 mm- 1 tube 2.5 mm
Maxi Punch Set (5,0 - 8,0 mm)
For punching large holes into leather. Tubes 6 pcs. in diameter sizes of: 5,0 mm, 5,5 mm, 6,0 mm, 6,5 mm, 7,0 mm und 8,0 mm.
Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.
Oblong Punches
For hitting elongated holes in leather, e.g. to pull a strap through.
Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.
Available options:- (L x W) 14 x 3.0 mm- (L x W) 16.5 x 3.5 mm- (L x W) 19.5 x 4.0 mm- (L x W) 24.0 x 5.0 mm- (L x W) 28.0 x 4.5 mm- (L x W) 32.0 x 4.5 mm- (L x W) 38.0 x 5.5 mm
When ordering 1 piece, you will receive 1 oblong punch of the selected size.
Osborne Rosette Cutters (in 8 different sizes)
High quality rosette cutters from Osborne. For punching rosette-shaped discs from leather, cardboard or rubber as a decorative disc or as a base for a concho. The massive, forged handle spreads the force excellently onto the CNC milled punching die.
When punching, please use a suitable base such as our cutting mats or cutting board to avoid dulling. A heavy duty workbench, a heavy stone or a thick metal sheet under the cutting mat / chopping board can help making the punching much easier. We recommend a heavy rawhide hammer version # 3 for use with the rosette punches. From the Ø 51 mm version, a soft-face hammer with even greater weight is recommended to simplify punching out.
Please note that several punches are necessary for a clean cut-out. Due to the large punching surface punching is difficult or impossible with one hit.
Available options:
Ø 57 mm - (2-1 / 4 ")Ø 63 mm - (2-1 / 2 ")
When ordering 1 piece you will receive 1 Osborne rosette cutter of the selected size.
Osborne Small Hole Punch Set
For punching small holes in leather. 7-hole tubes in diameters 2.0 mm, 2.4 mm, 2.8 mm, 3.2 mm, 4.0 mm, 4.4 mm and 4.8 mm.
Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.
Oval Punch Set (3.0 - 8.0 mm) 7 pcs.
Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.
For punching oval holes in leather. Pipe 6 pcs. in the following approx. sizes:
- 8,0 mm x 5,1 mm
- 7,4 mm x 4,8 mm
- 6,5 mm x 4,1 mm
- 5,3 mm x 3,3 mm
- 4,3 mm x 2,4 mm
- 3,0 mm x 2,0 mm
Please use a suitable base e.g. hard rubber or hardwood board and use a wood / tooling hammer for punching.
Oval Hole punches
For punching oval holes into leather.
Please use a suitable base e.g. hard rubber or hardwood board and use a wooden / tooling hammer for punching.
Available options:
- Ø 2.5 mm: oval width 3.0 mm x oval height 1.8 mm- Ø 3.5 mm: oval width 4.2 mm x oval height 2.3 mm- Ø 4,5 mm: oval width 5,5 mm x oval height 3,2 mm- Ø 5.5 mm: oval width 6.8 mm x oval height 4.0 mm- Ø 6.5 mm: oval width 7.8 mm x oval height 4.8 mm
When ordering 1 piece, you will receive 1 oval hole punch of the chosen size.
Round Strap End Punches
For cutting even ends on belts and straps.
Available options:- Max. Width 12.5 mm- Max. Width 19.0 mm- Max. Width 26.0 mm- Max. Width 32.0 mm- Max. Width 38.0 mm- Max. Width 45.0 mm
When ordering 1 piece you will receive 1 round strap end punch of the selected size.
Screw Press - Free Arm
Suitable for professionals and home users. Due to the free-arm design, it is easy to punch holes, set rivets or snaps into already finished items such as pouches for instance.
Hint:- For the use and setting of snaps and rivets you will need the appropriate tool inserts. Inserts are not included, but can be ordered here. These can be found as accessories in our shop.- Screw presses should be firmly attached to a workbench or countertop. Appropriate holes are in screw press' foot. Mounting material is not included!- Our screw presses are only for 1/4 "thread inserts with a 24 pitch (6.35 mm)!
Dimensions:Total height: 31 cmTotal length: 23 cmTotal width: 7.8 cm
Length of footplate: 18 cmWidth of footplate: 7.8 cm
Lift: 4.5 cmProjection: about 10.5 cm
Top thread: 1/4 "with 24 pitch (6.35 mm)Bottom insert: 12 mm
Screw Press - Hobby 2
Suitable for home users who want to connect press studs or rivets or punch holes occasionally.
Hint:- For the use and setting of snaps and rivets you will need the appropriate tool inserts. Inserts are not included, but can be ordered here. These can be found as accessories in our shop.- Screw presses should be firmly attached to a workbench or countertop. Appropriate holes are in screw press' foot. Mounting material is not included!- Our spindle presses are only for 1/4 "thread inserts with a 24 pitch (6.35 mm)!
Dimensions:Total height: 25.5 cmTotal length: 22.5 cmTotal width: 7.8 cm
Length of footplate: 18.5 cmWidth of footplate: 7.8 cm
Lift: 4.8 cmProjection: about 8.5 cm
Top thread: 1/4 "with 24 pitch (6.35 mm)Bottom Insert: 12 mm
Screw Press - Professional 2
Suitable for professionals and home users. For fatigue-free punching of holes into thick leather and setting rivets or snaps.Professional version with 15.5 cm projection.
Hint:- For the use and setting of snaps and rivets you will need the appropriate tool inserts. Inserts are not included, but can be ordered here. These can be found as accessories in our shop.- Screw presses should be firmly attached to a workbench or countertop. Appropriate holes are in screw press' foot. Mounting material is not included!- Our screw presses are only for 1/4 "thread inserts with a 24 pitch (6.35 mm)!
Dimensions:Total height: 29 cmTotal length: 30 cmTotal width: 10 cm
Length of footplate: 30 cmWidth of footplate: 10 cm
Lift: 4.5 cmProjection: about 15.5 cm
Top thread: 1/4 "with 24 pitch (6.35 mm)Bottom insert: 12 mm
Screw Press Tubes - 15 different sizes
Available tubes (Ø mm): 0.5 - 7 mm + 8 mm
Hint:- The tubes only fit into screw presses witht the below dimensions.
Dimensions:Top thread: 1/4 "with 24 pitch (6.35 mm)Insert below: Ø 12 mm
When ordering, you will receive 1 tube of the chosen size!
Screw Press Anvil - 3 different sizes
Available anvils (Ø mm): 12 mm, 24 mm, 28 mm
Hint:- Anvils require an insert with a diameter of 12 mm.
When ordering, you will receive 1 anvil of the chosen size!
Screw Press - Hobby
Suitable for home users who want to connect press studs or rivets or punch holes occasionally.
Hint:- For the use and setting of snaps and rivets you will need the appropriate tool inserts. Inserts are not included, but can be ordered here. These can be found as accessories in our shop.- Screw presses should be firmly attached to a workbench or countertop. Appropriate holes are in screw press' foot. Mounting material is not included!- Our Screw Press - es are only for 1/4 "thread inserts with a 24 pitch (6.35 mm)!
Dimensions:Total height: 21.5 cmTotal length: 18.5 cmTotal width: 7 cm
Length of footplate: 14 cmWidth of footplate: 7 cm
Lift: 4.2 cmProjection: about 5.5 cm
Top thread: 1/4 " with 24 pitch (6.35 mm)Bottom insert: 12 mm
Selzer Compound Action - Revolving Punch (2.0 - 4.5 mm)
Six metric interchangeable punches with diameters of 2.0 / 2.5 / 3.0 / 3.5 / 4.0 and 4.5 mm. With viewing window for selected hole diameter.
Automatic lock, surface nickel-plated with red, ergonomic handles. Highest quality, patented, manufactured in Remscheid, Germany.
With the active compound action, you have a power saving of about 70%.
For hole punching leather and similar strong and solid materials.
Replacement tubes (2.0 - 4.5 mm) / Extension Set - tubes (1.5 - 6.0 mm) / Screw tube changers are available.
Selzer Compound Action - Revolving Punch (OVAL Belt Variation 1)
Including six already inserted, oval tubes in diameters:
- 4.6 x 3.0 mm (horizontal alignment)- 6.3 x 3.5 mm (horizontal alignment)- 5.7 x 3.8 mm (horizontal alignment)- 3.0 x 4.6 mm (vertical alignment)- 3.5 x 6.3 mm (vertical alignment)- 3.8 x 5.7 mm (vertical alignment)
Automatic lock, surface nickel-plated with black, ergonomic handles. Highest quality, patented, manufactured in Remscheid, Germany.
With the active compound action, you'll have power savings of about 70%.
For punching leather and similar strong and solid materials.
Attention: when changing oval tubes check orientation before squezzing tight!
Selzer Compound Action - Revolving Punch (OVAL Belt Variation 2)
Including six already inserted, oval & round tubes in diameters of
- 4.6 x 3.0 mm (horizontal alignment)- 6.3 x 3.5 mm (horizontal alignment)- 5.7 x 3.8 mm (horizontal alignment)- Ø 3.5 mm- Ø 4.0 mm- Ø 4.5 mm
Automatic lock, surface nickel-plated with black, ergonomic handles. Highest quality, patented and manufactured in Remscheid, Germany.
With the active compound action translation, you'll have power savings of about 70%.
For punching leather and similar strong and solid materials.
Attention: when changing oval tubes check orientation before squeezing tight!
Selzer Compound Action - Revolving Punch (OVAL Belt Variation 3)
Including six already inserted, oval & round tubes in diameters of
- 4.6 x 3.0 mm (vertical alignment)- 6.3 x 3.5 mm (vertical alignment)- 5.7 x 3.8 mm (vertical alignment)- Ø 5.0 mm- Ø 5.5 mm- Ø 6.0 mm
Automatic lock, surface nickel-plated with black, ergonomic handles. Highest quality, patented, manufactured in Remscheid, Germany.
With the active Compound Action translation, you'll have power savings of about 70%.
For punching leather and similar strong and solid materials.
Attention: when changing oval tubes check orientation before squezzing tight!
Selzer Oblong Punch (up to 10 mm width)
For cutting elongated holes in leather, cardboard, rubber, etc. for e.g. pulling a strap through.
Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.
Cutter inductively hardened; powder-coated tool.
Available options:
3 x 2 mm4 x 2 mm5 x 2 mm6 x 3 mm7 x 3 mm8 x 2.5 mm8 x 3 mm10 x 2 mm10 x 3 mm10 x 5 mm10 x 6 mm
When ordering 1 piece you will receive 1 Selzer oblong punch of the selected size.
Selzer Oblong Hole Punch (up to 15 mm width)
For hitting elongated holes into leather, cardboard, rubber, etc. to e.g. to pull a strap through.
Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.
Cutting edge inductively hardened, tool powder-coated.
Available options:
12 x 2 mm12 x 3 mm12 x 6 mm14 x 3 mm15 x 3 mm15 x 4 mm15 x 5 mm15 x 6 mm15 x 7 mm15 x 8 mm15 x 10 mm
When ordering 1 piece you will receive 1 Selzer oblong hole punch of the selected size.
Selzer Oblong Hole Punch (up to 20 mm width)
For punching elongated holes in leather, cardboard, rubber, etc. by e.g. to perform a belt.
Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.
Cutting edge inductively hardened, tool powder-coated.
Available options:
16 x 3 mm16 x 3.5 mm16 x 9 mm17 x 4 mm17 x 11 mm18 x 3 mm18 x 4 mm18 x 10 mm20 x 2 mm20 x 4 mm20 x 3 mm20 x 5 mm20 x 6 mm20 x 8 mm20 x 9 mm20 x 12 mm
When ordering 1 piece you will receive 1 Selzer oblong hole punch of the selected size.
Selzer Oblong Hole Punch (up to 25 mm width)
For punching elongated holes in leather, cardboard, rubber, etc. by e.g. to perform a belt.
Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.
Cutting edge inductively hardened, tool powder-coated.
Available options:
21 x 13 mm22 x 4 mm24 x 4 mm25 x 4 mm25 x 5 mm25 x 6 mm25 x 12 mm
When ordering 1 piece you will receive 1 Selzer oblong hole punch of the selected size.
Selzer Oblong Hole Punch (up to 30 mm width)
For punching elongated holes in leather, cardboard, rubber, etc. by e.g. to perform a belt.
Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.
Cutting edge inductively hardened, tool powder-coated.
Available options:
26 x 4 mm28 x 7.5 mm30 x 5 mm30 x 10 mm30 x 11 mm30 x 12 mm30 x 16 mm
When ordering 1 piece you will receive 1 Selzer oblong hole punch of the selected size.
Selzer Oblong Hole Punch (up to 50 mm width)
For punching elongated holes in leather, cardboard, rubber, etc. by e.g. to perform a belt.
Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.
Cutting edge inductively hardened, tool powder-coated.
Available options:
31 x 5 mm32 x 5 mm35 x 15 mm38 x 18 mm40 x 10 mm40 x 18 mm42 x 22 mm50 x 15 mm
When ordering 1 piece you will receive 1 Selzer oblong hole punch of the selected size.
Selzer Oval Tube (6 x 4 mm)
Fits the Selzer Revolving Punch and Compound Action Revolving Punch.
To replace / insert the Oval Pipe, you need the Punch Changer.
Selzer Revolving Punch (2.0 - 4.5 mm)
Six metric interchangeable tubes with diameters of 2.0 / 2.5 / 3.0 / 3.5 / 4.0 and 4.5 mm. With viewing window for selected hole diameter.
Automatic lock, black powder-coated surface with red handles. Highest quality, manufactured in Remscheid, Germany.
For hole punching leather and similar materials.
Replacement tubes (2.0 - 4.5 mm) / Extension Set - tubes (1.5 - 6.0 mm) / tube changers are available here.
Selzer Revolving Punch and Grommet Pliers (4.0 - 5.0 mm)
Three metric interchangeable punches with diameters of 4.0 / 4.5 and 5.0 mm. Three grommet setters for matching eyelets.
Automatic lock, surface nickel-plated with red handles. Highest quality, manufactured in Remscheid, Germany.
For hole punching / eyeletting in leather and similar materials.
Replacement tubes (2.0 - 4.5 mm) / Extension Set - tubes (1.5 - 6.0 mm) / tubes changers are available here.
Selzer Round Hole Punches Ø 1 - 10 mm
Round hole punches in ½ mm - gradations. For punching holes in leather or similar materials.
Please use a hard base and a suitable hammer (no steel hammer, risk of splintering), see accessories.
When ordering 1 piece you will receive 1 Selzer round hole punch of the selected size.
Selzer Tubes - Complete Set (1.5 - 6.0 mm)
Ten metric punches with diameters of 1.5 / 2.0 / 2.5 / 3.0 / 3.5 / 4.0 / 4.5 / 5.0 / 5.5 and 6.0 mm.
To replace the tubes you'll need the tube changer.
Suitable for the Selzer revolving punch and compound action revolving punch.
Selzer Tube Extension Set (1.5 - 6.0 mm)
Four metric tubes in diameters of 1.5 / 5.0 / 5.5 and 6.0 mm.
To replace the tubes you'll need the screw tube changer.
Fits the Selzer Revolving Punch and Compound Action Revolving Punch.
Selzer Tube Replacement Set (2.0 - 4.5 mm)
Six metric tubes in diameters of 2.0 / 2.5 / 3.0 / 3.5 / 4.0 and 4.5 mm.
To replace the tubes you'll need the screw tube changer.
Fits the Selzer Revolving Punch and Compound Action Revolving Punch.
Steel wad punch (Conical Hole Punches)
Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.
Available options:- Ø 1,0 mm- Ø 2,0 mm- Ø 3,0 mm- Ø 4,0 mm- Ø 5,0 mm- Ø 6,0 mm- Ø 7,0 mm- Ø 8,0 mm- Ø 9,0 mm- Ø 10,0 mm
When ordering 1 piece you will receive 1 hanger bar of the selected size.
Tubes for the original Japanese screw punch (screw punch made in Japan)
in 7 different sizes
Original tubes for our Japanese screw punch. Available in following sizes:- 1.0 mm- 1.5 mm- 2.0 mm- 2.5 mm- 3.0 mm- 3.5 mm- 4.0 mm
Note: These tubes are designed exclusively for use with the original hole punch offered by us.
When ordering 1 piece you will receive:- 1 tube for the original Japanese screw punch in the selected size.
