Craft Japan Oblong Punch
€35.70
Product information "Craft Japan Oblong Punch"
Craft Japan Oblong Hole Punch (in 4 different sizes)
High quality and manufactured with Japanese precision. For punching elongated holes into leather, cardboard, rubber, etc. to e.g. pull a strap through. The punches are already very sharp and allow an easy use in your work. Precise long holes are the result. The non-lacquered cut edges are durable and can be easily resharpened.
Please use a suitable cutting surface to avoid dulling of the tool and a suitable hammer for punching (no steel hammer, risk of splintering) see accessories.
Available options:
#4 12 x 2 mm
#5 15 x 2.5 mm
#6 18.5 x 3 mm
#7 21 x 3.5 mm
When ordering 1 piece you will receive 1 Craft Japan oblong hole punch of the selected size.
Login
Accessory Items
Cutting mat / work pad in 3 different sizes. High-quality cutting mat for precise and non-marking cuts. 3 - layer sandwich construction with hard core. One side is black, the other side is green. Printed on both sides with 10 and 50 mm pitch, as well as a fine grid. Professional version. Available options:small: length 450 mm / width: 300 mm / thickness: 3 mmlarge: Length: 600 mm / width: 450 mm / thickness: 3 mmextra large: length: 900 mm / width: 600 mm / thickness: 3 mm
Rawhide hammer made of water buffalo raw hide with oak handle available in 3 different sizes. For kickback-free punching of hole punches, tooling stamps, etc. Pick list:# 1 Total weight: 295 grams / head - Ø: 48 mm / total length: 230 mm# 2 Total weight: 250 grams / head - Ø: 42 mm / total length: 290 mm# 3 Total weight: 170 grams / head - Ø: 37 mm / total length: 260 mm - When ordering 1 piece you will receive 1 raw hide hammer of the chosen size.
Osborne Poly Hammer no. 496 with hardwood handle. For use with tooling stamps, hole punches, braiding irons, etc. (straight face). Little kickback due to impact absorbing poly hammer head. 240 gm total weight / head - Ø 45 mm / total length 295 mm
Buffalo Rawhide Maul rawhide with hardwood handle. With ergonomic weight distribution, thus low fatigue and excellent impact pattern. For use with tooling stamps, hole punches, braiding irons, etc. (round face). No kickback due to impact absorbing hammer head. - Professional version. Available options:# 02: Overall length: 240 mm / total weight: 1250 gm / head Ø: 75 mm When ordering 1 piece you will receive 1 rawhide maul of the selected size.
Professional cutting and punching pad made of polypropylene Very strong, cut and shock resistant pad in industrial standard. Ideal for cutting or punching leather. Available in 20 mm thickness and 3 different sizes. Important note: Due to the hardness of the material, these pads are not suitable for use with our pricking Irons, braiding Iron and multiple prong irons. Available sizes:- 20 cm x 30 cm- 30 cm x 30 cm- 30 cm x 50 cm When ordering 1 piece you will receive 1 pad of the selected size.
Similar Items
Oblong Punches For hitting elongated holes in leather, e.g. to pull a strap through. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories. Available options:- (L x W) 14 x 3.0 mm- (L x W) 16.5 x 3.5 mm- (L x W) 19.5 x 4.0 mm- (L x W) 24.0 x 5.0 mm- (L x W) 28.0 x 4.5 mm- (L x W) 32.0 x 4.5 mm- (L x W) 38.0 x 5.5 mm When ordering 1 piece, you will receive 1 oblong punch of the selected size.