Selzer Oblong Punches (up to 10 mm width)

Product information "Selzer Oblong Punches (up to 10 mm width)"

Selzer Oblong Punch (up to 10 mm width)

For cutting elongated holes in leather, cardboard, rubber, etc. for e.g. pulling a strap through.

Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.

Cutter inductively hardened; powder-coated tool.

Available options:

3 x 2 mm
4 x 2 mm
5 x 2 mm
6 x 3 mm
7 x 3 mm
8 x 2.5 mm
8 x 3 mm
10 x 2 mm
10 x 3 mm
10 x 5 mm
10 x 6 mm

When ordering 1 piece you will receive 1 Selzer oblong punch of the selected size.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessory Items

Cutting Mat

Cutting mat / work pad in 3 different sizes. High-quality cutting mat for precise and non-marking cuts. 3 - layer sandwich construction with hard core. One side is black, the other side is green. Printed on both sides with 10 and 50 mm pitch, as well as a fine grid. Professional version. Available options:small: length 450 mm / width: 300 mm / thickness: 3 mmlarge: Length: 600 mm / width: 450 mm / thickness: 3 mmextra large: length: 900 mm / width: 600 mm / thickness: 3 mm

From €13.95*

Details

Raw Hide Hammer

Rawhide hammer made of water buffalo raw hide with oak handle available in 3 different sizes. For kickback-free punching of hole punches, tooling stamps, etc. Pick list:# 1 Total weight: 295 grams / head - Ø: 48 mm / total length: 230 mm# 2 Total weight: 250 grams / head - Ø: 42 mm / total length: 290 mm# 3 Total weight: 170 grams / head - Ø: 37 mm / total length: 260 mm - When ordering 1 piece you will receive 1 raw hide hammer of the chosen size.

From €24.90*

Details

Osborne Poly Hammer No.496

Osborne Poly Hammer no. 496 with hardwood handle. For use with tooling stamps, hole punches, braiding irons, etc. (straight face). Little kickback due to impact absorbing poly hammer head. 240 gm total weight / head - Ø 45 mm / total length 295 mm

€26.90*

Rawhide Maul

Buffalo Rawhide Maul rawhide with hardwood handle. With ergonomic weight distribution, thus low fatigue and excellent impact pattern. For use with tooling stamps, hole punches, braiding irons, etc. (round face). No kickback due to impact absorbing hammer head. - Professional version. Available options:# 02: Overall length: 240 mm / total weight: 1250 gm / head Ø: 75 mm When ordering 1 piece you will receive 1 rawhide maul of the selected size.

€179.00*

Rickert - Cutting / punching pad made of PP, natural

Professional cutting and punching pad made of polypropylene Very strong, cut and shock resistant pad in industrial standard. Ideal for cutting or punching leather. Available in 20 mm thickness and 3 different sizes. Important note: Due to the hardness of the material, these pads are not suitable for use with our pricking Irons, braiding Iron and multiple prong irons. Available sizes:- 20 cm x 30 cm- 30 cm x 30 cm- 30 cm x 50 cm When ordering 1 piece you will receive 1 pad of the selected size.

From €29.95*

Details

Ähnliche Artikel

Oval Hole Punch Set (3.0 – 8.0 mm)

Oval Punch Set (3.0 - 8.0 mm) 7 pcs. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories. For punching oval holes in leather. Pipe 6 pcs. in the following approx. sizes: - 8,0 mm x 5,1 mm - 7,4 mm x 4,8 mm - 6,5 mm x 4,1 mm - 5,3 mm x 3,3 mm - 4,3 mm x 2,4 mm - 3,0 mm x 2,0 mm Please use a suitable base e.g. hard rubber or hardwood board and use a wood / tooling hammer for punching.

€99.95*

Oblong Punches

Oblong Punches For hitting elongated holes in leather, e.g. to pull a strap through. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories. Available options:- (L x W) 14 x 3.0 mm- (L x W) 16.5 x 3.5 mm- (L x W) 19.5 x 4.0 mm- (L x W) 24.0 x 5.0 mm- (L x W) 28.0 x 4.5 mm- (L x W) 32.0 x 4.5 mm- (L x W) 38.0 x 5.5 mm When ordering 1 piece, you will receive 1 oblong punch of the selected size.

From €58.95*

Details

Maxi Punch Set (5,0 - 8,0 mm)

Maxi Punch Set (5,0 - 8,0 mm) For punching large holes into leather. Tubes 6 pcs. in diameter sizes of: 5,0 mm, 5,5 mm, 6,0 mm, 6,5 mm, 7,0 mm und 8,0 mm. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.

€24.50*