Giardini Graduated Cylinder

GIARDINI - MAXEDGE™ Pro Matte Edge Paint Edge sealing / edge varnish Our MAXEDGE™ Pro edge paints are available in all basic colours. These can be mixed as desired in many different colours (see colour chart). All colours appear after applying to the leather in the colour that is already represented in its liquid stage. MAXEDGE™ Pro Matte Edge Paints dry with a satin matt finish and cover the leather edge with a rubbery, hard to peel paint application that is soft and pliable. Excellent features: VOC reduced (volatile organic compounds) waterproof when dried very abrasion, cut and scratch resistant rubbery paint application non-fading very pliable (colour does not break during movement) soft edge when dried out (no rough, protruding leather fibres that reduce the feeling of a pleasant edge) subsequent polishing is not necessary Up to 20% dilutable with water Consistency: viscous Important!: Only use the edge paints for leather edges.For best results apply a first layer of neutral Basecoat. Edge paints are not suitable for colouring the grain or flesh side of leather. Please always test on a sample first before dyeing on the actual workpiece. This way unpleasant results can be avoided in advance. If you want to add water to dilute, always use distilled water. Do not leave the bottle standing opened for too long. Store the product at the same temperature as possible. Use within 6 months after opening A clear mixing table for the colors shown in the color chart can be found -> here <-. Application: Prepare the leather edge for dyeing by sanding it with a fine grit sandpaper and / or burnishing the edge. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly. Apply the basecoat to the leather edge with a brush, wool dauber or our edge roller. After 20-30 min (depending on weatherconditions) the basecoat should be dry and you can apply the edgecolour of your choice. Please make sure that any edge colour on the surface is wiped off immediately with a damp cloth, to avoid uneven edges and staining. For a denser paint application apply another coat of edge paint to your work piece. Wait approx. 20 min. (Our MAXEDGE™ Pro Matte Edge Paints dry a bit slower than other manufacturers' products, so you have plenty of time to paint even long edges without the need to rush.) After about an hour, the edge paint is dry and adheres firmly to the edge. A subsequent polishing is no longer necessary. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

GIARDINI - MAXEDGE™ Dense Edge Paint Edge sealing / edge varnish Our MAXEDGE™ Pro edge paints are available in all basic colours. These can be mixed as desired in many different colours (see colour chart). All colours appear after applying to the leather in the colour that is already represented in its liquid stage. MAXEDGE™ Dense Edge Paints dry with a satin matt finish and cover the leather edge with a rubbery, hard to peel paint application that is soft and pliable. Excellent features: VOC reduced (volatile organic compounds) waterproof when dried very abrasion, cut and scratch resistant rubbery paint application non-fading very pliable (colour does not break during movement) soft edge when dried out (no rough, protruding leather fibres that reduce the feeling of a pleasant edge) subsequent polishing is not necessary dilutable with up to 20% water Consistency: viscous Important!: Only use the edge paints for leather edges. Edge paints are not suitable for colouring the grain or flesh side of leather. Please always test on a sample first before dyeing on the actual workpiece. This way unpleasant results can be avoided in advance. If you want to add water to dilute, always use distilled water. Do not leave the bottle standing opened for too long. Store the product at the same temperature as possible. Use within 6 months after opening. A clear mixing table for the colors shown in the color chart can be found -> here <-. Application: Prepare the leather edge for dyeing by sanding it with a fine grit sandpaper and / or burnishing the edge. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly. Apply the edge paint to the leather edge with a brush, wool dauber or our edge roller. Please make sure that any edge colour on the surface is wiped off immediately with a damp cloth, to avoid uneven edges and staining. For a denser paint application apply another coat of edge paint to your work piece. Wait approx. 20 min. (Our MAXEDGE™ Dense Edge Paints dry a bit slower than other manufacturers' products, so you have plenty of time to paint even long edges without the need to rush.) After about an hour, the edge paint is dry and adheres firmly to the edge. A subsequent polishing is no longer necessary. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

GIARDINI - MAXEDGE™ Pro Iridescent Gloss Edge sealing / edge varnish Our MAXEDGE™ Pro Iridescent Gloss are available in in 4 iridescent metallic colours. It is a protective finish for MAXMATT™ and MAXEDGE™ Pro edge paints. MAXEDGE™ Pro Iridescent Gloss dries shiny and covers the already dyed/painted leather edge with a rubber like, hard to remove paint application that is still soft and flexible. MAXEDGE™ Pro Iridescent Gloss is only suitable as a protective finish for MAXMATT™ or MAXEDGE™ Pro edge paints. Attention! -- To obtain the Iridescent effect it is always necessary to apply a black Giardini Edge Paint as base, in order to enhance the visibility of this effect.-- Excellent features: VOC reduced (volatile organic compounds) waterproof if dried out very abrasion, cut and scratch resistant rubbery paint application non-fading very flexible (paint does not break during movement) soft edge when dried out (no rough, protruding leather fibres which reduce the feeling of a pleasant edge) subsequent polishing is not necessary Consistency: viscous Important!: Use the MAXEDGE™ Pro Protecting Gloss exclusively for leather edges painted with MAXMATT™ and MAXEDGE™ Pro edge paints. Edge paints are not suitable for colouring grain or flesh side of the leather. Please always test on a sample before applying on the actual work piece. So unpleasant results can be avoided in advance. Do not leave the bottle standing in the air for too long. Store the product at consistent temperatures. Use within 6 months after opening Application: Prepare the leather edge for dyeing by sanding it with a fine sandpaper or smoothing the edge with an edge burnisher. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly. Apply the edge paint with a brush, wool dauber or our edge roller onto the leather edge painted with black MAXMATT™ or MAXEDGE™ Pro edge paints. Wait for about 40 minutes until the MAXEDGE™ Pro Protecting Gloss has dried. After about an hour, the edge paint has completely dried and adheres firmly to the edge. A subsequent polishing is not necessary.Download: safetydatasheet Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

GIARDINI - MAXEDGE™ Pro Metal Edge Paint Edge sealing / edge varnish Our MAXEDGE™ Pro edge paints are available in 2 metallic colours. These can be mixed as desired in many different colours (see colour chart). All colours appear after applying to the leather in the colour that is already represented in its liquid stage. MAXEDGE™ Pro Metal Edge Paints dry with a satin matt finish and cover the leather edge with a rubbery, hard to peel paint application that is soft and pliable. Info: MAXEDGE™ Pro Protecting Gloss can be used for final fixation. This creates a shiny edge. Excellent features: VOC reduced (volatile organic compounds) waterproof when dried very abrasion, cut and scratch resistant rubbery paint application non-fading very pliable (colour does not break during movement) soft edge when dried out (no rough, protruding leather fibres that reduce the feeling of a pleasant edge) subsequent polishing is not necessary Consistency: viscous Important!: Only use the edge paints for leather edges. Edge paints are not suitable for colouring the grain or flesh side of leather. Please always test on a sample first before dyeing on the actual workpiece. This way unpleasant results can be avoided in advance. If you want to add water to dilute, always use distilled water. Do not leave the bottle standing opened for too long. Store the product at the same temperature as possible. Use within 6 months after opening. Application: Prepare the leather edge for dyeing by sanding it with a fine grit sandpaper and / or burnishing the edge. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly. Apply the edge paint to the leather edge with a brush, wool dauber or our edge roller. Please make sure that any edge colour on the surface is wiped off immediately with a damp cloth, to avoid uneven edges and staining. For a denser paint application apply another coat of edge paint to your work piece. Wait approx. 20 min. (Our MAXEDGE™ Pro Metal Edge Paints dry a bit slower than other manufacturers' products, so you have plenty of time to paint even long edges without the need to rush.) After about an hour, the edge paint is dry and adheres firmly to the edge. A subsequent polishing is no longer necessary. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

GIARDINI - MAXEDGE™ Pro Fluo Edge Paint Edge sealing / edge varnish Our MAXEDGE™ Pro Fluo Edge Paints are available in 5 fluorescent colours. All colours appear after applying to the leather in the colour that is already represented in its liquid stage. MAXEDGE™ Pro Fluo Edge Paints dry with a satin matt finish and cover the leather edge with a rubbery, hard to peel paint application that is soft and pliable. Info: MAXEDGE™ Pro Protecting Gloss can be used for final fixation. This creates a shiny edge. Excellent features: VOC reduced (volatile organic compounds) waterproof when dried very abrasion, cut and scratch resistant rubbery paint application non-fading very pliable (colour does not break during movement) soft edge when dried out (no rough, protruding leather fibres that reduce the feeling of a pleasant edge) subsequent polishing is not necessary dilutable with up to 20% water Consistency: viscous Important!: Only use the edge paints for leather edges. Edge paints are not suitable for colouring the grain or flesh side of leather. Please always test on a sample first before dyeing on the actual workpiece. This way unpleasant results can be avoided in advance. If you want to add water to dilute, always use distilled water. Do not leave the bottle standing opened for too long. Store the product at the same temperature as possible. Use within 6 months after opening. Application: Prepare the leather edge for dyeing by sanding it with a fine grit sandpaper and / or burnishing the edge. Stir the edge paint thoroughly. Please do not shake, as otherwise bubbles form which dissolve only very slowly. Apply the edge paint to the leather edge with a brush, wool dauber or our edge roller. Please make sure that any edge colour on the surface is wiped off immediately with a damp cloth, to avoid uneven edges and staining. For a denser paint application apply another coat of edge paint to your work piece. Wait approx. 20 min. (Our MAXEDGE™ Pro Fluo Edge Paints dry a bit slower than other manufacturers' products, so you have plenty of time to paint even long edges without the need to rush.) After about an hour, the edge paint is dry and adheres firmly to the edge. A subsequent polishing is no longer necessary. Please note that the use of different display technologies and individual display settings can lead to distortions in the colour representation. Therefore, the colours shown on your display may differ slightly from the actual colour of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.