Craft Japan Professional Stainless Steel stamping tool SVC-1 ( 1d-07 )(Veiners: Lined)
High-quality stainless steel stamps made by Craft Japan. The precise design allows you to work exactly. The impressions made depict even the finest details. The stainless steel manufacturing was done with Japanese care, resulting in a very durable and long-lasting tool.
Dimensions: Width: 12,7 mm, Length: 4,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Craft Japan stamping tool F874 ( 1d-19 )
High quality stamping tool from Craft Japan. Precise and finely debossed prints mark this series of stamping tools.
Dimensions: Width: 5 mm, Length: 2,9 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Craft Japan stamping tool F922 ( 1f-07 )
High quality stamping tool from Craft Japan. Precise and finely debossed prints mark this series of stamping tools.
Dimensions: Width: 5,5 mm, Length: 3,2 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Craft Japan stamping tool V407 ( 1r-01 )
High quality stamping tool from Craft Japan. Precise and finely debossed prints mark this series of stamping tools.
Dimensions: Width: 7 mm, Length: 17 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Craft Japan stamping tool V462 ( 1p-06 )
High quality stamping tool from Craft Japan. Precise and finely debossed prints mark this series of stamping tools.
Dimensions: Width: 3 mm, Length: 12 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Craft Japan stamping tool V715 ( 1r-20 )
High quality stamping tool from Craft Japan. Precise and finely debossed prints mark this series of stamping tools.
Dimensions: Width: 4,5 mm, Length: 18,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Craft Japan stamping tool V745 ( 1p-08 )
High quality stamping tool from Craft Japan. Precise and finely debossed prints mark this series of stamping tools.
Dimensions: Width: 2 mm, Length: 8 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Craft Japan stamping tool V821 ( 1p-14 )
High quality stamping tool from Craft Japan. Precise and finely debossed prints mark this series of stamping tools.
Dimensions: Width: 3 mm, Length: 18 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Dimensions: width: 11,2 mm, length: 3,4 mm
In the production of our stamps many new and innovative ideas which simplify the stamping process have in, which simplify the stamping process directly. Rickert - K - Stamps are characterized by more professional shaping of the stamp profiles, a clean and exact impact pattern, as well as perfectly matched carving impression patterns.
For easy selection of the desired stamp we are using the well-known numbering of stamps. This gives the leather artist the opportunity to choose the right alternative stamp under this number.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Info: "Rickert - Leatherworker's Finest" - tools from leather craftsmen for leather craftsmen. All tools of the series are made using traditional Japanese craft techniques. Only selected, high-quality and durable raw materials enter the production. The selected degrees of hardness of the steel are reflected in the precision, sharpness and quality of the respective tools. Each one of these products has been thoroughly tested for quality and durability and are only approved for sale after meeting our exacting standards.
Dimensions: width: 11,2 mm, length: 3,4 mm
In the production of our stamps many new and innovative ideas which simplify the stamping process have in, which simplify the stamping process directly. Rickert - K - Stamps are characterized by more professional shaping of the stamp profiles, a clean and exact impact pattern, as well as perfectly matched carving impression patterns.
For easy selection of the desired stamp we are using the well-known numbering of stamps. This gives the leather artist the opportunity to choose the right alternative stamp under this number.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Info: "Rickert - Leatherworker's Finest" - tools from leather craftsmen for leather craftsmen. All tools of the series are made using traditional Japanese craft techniques. Only selected, high-quality and durable raw materials enter the production. The selected degrees of hardness of the steel are reflected in the precision, sharpness and quality of the respective tools. Each one of these products has been thoroughly tested for quality and durability and are only approved for sale after meeting our exacting standards.
Dimensions: width: 15,8 mm, length: 3,5 mm
In the production of our stamps many new and innovative ideas which simplify the stamping process have in, which simplify the stamping process directly. Rickert - K - Stamps are characterized by more professional shaping of the stamp profiles, a clean and exact impact pattern, as well as perfectly matched carving impression patterns.
For easy selection of the desired stamp we are using the well-known numbering of stamps. This gives the leather artist the opportunity to choose the right alternative stamp under this number.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Info: "Rickert - Leatherworker's Finest" - tools from leather craftsmen for leather craftsmen. All tools of the series are made using traditional Japanese craft techniques. Only selected, high-quality and durable raw materials enter the production. The selected degrees of hardness of the steel are reflected in the precision, sharpness and quality of the respective tools. Each one of these products has been thoroughly tested for quality and durability and are only approved for sale after meeting our exacting standards.
Dimensions: width: 16,3 mm, length: 3,4 mm
In the production of our stamps many new and innovative ideas which simplify the stamping process have in, which simplify the stamping process directly. Rickert - K - Stamps are characterized by more professional shaping of the stamp profiles, a clean and exact impact pattern, as well as perfectly matched carving impression patterns.
For easy selection of the desired stamp we are using the well-known numbering of stamps. This gives the leather artist the opportunity to choose the right alternative stamp under this number.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Info: "Rickert - Leatherworker's Finest" - tools from leather craftsmen for leather craftsmen. All tools of the series are made using traditional Japanese craft techniques. Only selected, high-quality and durable raw materials enter the production. The selected degrees of hardness of the steel are reflected in the precision, sharpness and quality of the respective tools. Each one of these products has been thoroughly tested for quality and durability and are only approved for sale after meeting our exacting standards.
Dimensions: width: 12,6 mm, length: 3,1 mm
In the production of our stamps many new and innovative ideas which simplify the stamping process have in, which simplify the stamping process directly. Rickert - K - Stamps are characterized by more professional shaping of the stamp profiles, a clean and exact impact pattern, as well as perfectly matched carving impression patterns.
For easy selection of the desired stamp we are using the well-known numbering of stamps. This gives the leather artist the opportunity to choose the right alternative stamp under this number.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Info: "Rickert - Leatherworker's Finest" - tools from leather craftsmen for leather craftsmen. All tools of the series are made using traditional Japanese craft techniques. Only selected, high-quality and durable raw materials enter the production. The selected degrees of hardness of the steel are reflected in the precision, sharpness and quality of the respective tools. Each one of these products has been thoroughly tested for quality and durability and are only approved for sale after meeting our exacting standards.
Rickert - K - stamping tool V708 ( 2c-11 )
In the production of our stamps many new and innovative ideas which simplify the stamping process have in, which simplify the stamping process directly. Rickert - K - Stamps are characterized by more professional shaping of the stamp profiles, a clean and exact impact pattern, as well as perfectly matched carving impression patterns.
For easy selection of the desired stamp we are using the well-known numbering of stamps. This gives the leather artist the opportunity to choose the right alternative stamp under this number.
Dimensions: width: 15,3 mm, length: 3,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Info: "Rickert - Leatherworker's Finest" - tools from leather craftsmen for leather craftsmen. All tools of the series are made using traditional Japanese craft techniques. Only selected, high-quality and durable raw materials enter the production. The selected degrees of hardness of the steel are reflected in the precision, sharpness and quality of the respective tools. Each one of these products has been thoroughly tested for quality and durability and are only approved for sale after meeting our exacting standards.
Stamping tool F873 ( S III-02 ) / 3,5 x 2,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool F874 ( S III-03 ) / 4,5 x 3,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool F912L ( S I-09 ) / 11,0 x 2,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool F912R ( S I-04 ) / 11,0 x 2,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool F914L ( B II-15 ) / 11,0 x 2,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool F914R ( B II-16 ) / 11,0 x 2,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool F921L / 7 x 3 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool F921R ( E-16 ) / 7 x 3 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool F922 ( S I-05 ) / 5,0 x 3,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool F923 ( E-14 ) / 6 x 3 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool F925 ( S I-10 ) / 5,5 x 2,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool F927 ( S I-08 ) / 10,0 x 4,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool F934 ( S I-07 ) / 9,0 x 4,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V400 ( S I-06 ) / 10,5 x 4,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V402 ( G-13 ) / 10,5 x 1,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V403 ( S II-03 ) / 12,5 x 3,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V404 ( S I-11 ) / 15,0 x 3,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V405 ( S II-09 ) / 11,0 x 5,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V406 ( S II-12 ) / 11,5 x 3,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V407 ( S II-06 ) / 16,5 x 5,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V409 ( S III-06 ) / 16,0 x 4,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V412 ( S III-04 ) / 21,0 x 5,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V417 ( S I-12 ) / 22,0 x 5,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V462 ( S II-11 ) / 10,5 x 3,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V463 ( S II-01 ) / 12,5 x 4,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V707 ( F-10 ) / 4,0 x 12,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V708 ( G-14 ) / 16,0 x 3,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V715 ( S II-04 ) / 17,5 x 4,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V745 ( S II-02 ) / 10,0 x 3,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V821 ( A-09 ) / 19,0 x 3,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool V920 ( D V-07 ) / 11,0 x 3,4 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
€7.95*
This website uses cookies to ensure the best experience possible. More information...
