Punziereisen / Prägewerkzeug "Celtic II" - Set
€58.50*
Punziereisen / Prägewerkzeug "Celtic II" - Set
13 teiliges Set bestehend aus 12 verschiedenen Punziereisen und 1 auswechselbaren Schlagstempel (-griff). Höhe der Punziereisen ca. 25 mm.
Zum Punzieren des Leders bitte die Oberfläche mit einem Schwamm und lauwarmen Wasser anfeuchten (Oberfläche muss saugfähig sein). Im Anschluss kann das Leder gefärbt werden. Unabhängig davon, ob das Leder gefärbt wird, empfehlen wir Ihnen abschliessend die Oberfläche mit unserem Leder - Pflege - Finish zu behandeln (Oberfläche wird schmutz- und wasserabweisend).
Bitte benutzen Sie zum Schlagen unbedingt einen geeigneten Hammer, um eine Beschädigung der Punziereisen auszuschliessen.
Punziereisen / Prägewerkzeug "Indianer" - Set
€34.95*
44 teiliges Set, bestehend aus: Handgriff / Schlagstempel, sowie 43 verschiedenen Punziereisenaufsätzen. (Größe ca. 9 - 10 mm)
Eine Auswahl verschiedenster Punziereisen mit indianischen Symbolen. Eine Erklärung der Bedeutung der verschiedenen Symbole liegt anbei.
Zum Punzieren des Leders bitte die Oberfläche mit einem Schwamm und lauwarmen Wasser anfeuchten (Oberfläche muss saugfähig sein). Im Anschluss kann das Leder gefärbt werden. Unabhängig davon, ob das Leder gefärbt wird, empfehlen wir Ihnen abschliessend die Oberfläche mit unserem Leder - Pflege - Finish zu behandeln (Oberfläche wird schmutz- und wasserabweisend). Bitte benutzen Sie zum Schlagen unbedingt einen geeigneten Hammer, um eine Beschädigung der Punziereisen auszuschliessen.
Punziereisen / Prägewerkzeug "Runen"
€75.00*
Punziereisen / Prägewerkzeug "Runen"
Buchstaben - Satz 27 tlg. / Buchstaben - Höhe: 19,1 mm
Zum Punzieren des Leders bitte die Oberfläche mit einem Schwamm und lauwarmen Wasser anfeuchten (Oberfläche muss saugfähig sein). Im Anschluss kann das Leder gefärbt werden. Unabhängig davon, ob das Leder gefärbt wird, empfehlen wir Ihnen abschliessend die Oberfläche mit unserem Leder - Pflege - Finish zu behandeln (Oberfläche wird schmutz- und wasserabweisend).
Bitte benutzen Sie zum Schlagen unbedingt einen geeigneten Hammer, um eine Beschädigung der Punziereisen auszuschliessen.
Punziereisen / Prägewerkzeug "Scroll" - Set (SCR) ( S IV-18 )
€39.90*
Punziereisen / Prägewerkzeug "Scroll" - Set (SCR)
Set mit 4 Punziereisen.
1. 17,0 x 14,0 mm
2. 17,0 x 15,0 mm
3. 21,1 x 12,0 mm
4. 21,0 x 17,2 mm
Zum Punzieren des Leders bitte die Oberfläche mit einem Schwamm und lauwarmen Wasser anfeuchten (Oberfläche muss saugfähig sein). Im Anschluss kann das Leder gefärbt werden. Unabhängig davon, ob das Leder gefärbt wird, empfehlen wir Ihnen abschliessend die Oberfläche mit unserem Leder - Pflege - Finish zu behandeln (Oberfläche wird schmutz- und wasserabweisend).
Bitte benutzen Sie zum Schlagen unbedingt einen geeigneten Hammer, um eine Beschädigung der Punziereisen auszuschliessen.
Punziereisen / Prägewerkzeug "Sternzeichen 2" - Set
€59.50*
Punziereisen / Prägewerkzeug "Sternzeichen 2" - Set
13 teiliges Set bestehend aus 12 verschiedenen Punziereisen und 1 auswechselbaren Schlagstempel (-griff). Höhe der Punziereisen ca. 25 mm.
Zum Punzieren des Leders bitte die Oberfläche mit einem Schwamm und lauwarmen Wasser anfeuchten (Oberfläche muss saugfähig sein). Im Anschluss kann das Leder gefärbt werden. Unabhängig davon, ob das Leder gefärbt wird, empfehlen wir Ihnen abschliessend die Oberfläche mit unserem Leder - Pflege - Finish zu behandeln (Oberfläche wird schmutz- und wasserabweisend).
Bitte benutzen Sie zum Schlagen unbedingt einen geeigneten Hammer, um eine Beschädigung der Punziereisen auszuschliessen.
%
Tip
Rickert Tooling Stamps "Starter - Set"
€159.00*
€178.80*
(11.07% saved)
12-piece set consisting of: Rickert - Leather Maul, swivel knife, ballpoint stylus and 8 different tooling stamps.
Basic equipment for tooling and carving leather. A variety of tooling stamps allow you to tool and carve many shapes and patterns. - Let your imagination guide you...
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
The set includes the following individual tools:
1x Rickert - stamping tool B935 ( 2a-12 )
1x Rickert - stamping tool B203 ( 2a-11 )
1x Rickert- stamping tool ( 2a-10 )
1x Rickert - stamping tool B701-F ( 2a-13 )
1x Rickert - stamping tool B702-F ( 2a-15 )
1x Rickert - stamping tool B936 ( 2a-14 )
1x Rickert - stamping tool A104 ( 2a-04 )
1x Rickert - stamping tool P206 ( 2b-14 )
1x Rickert - Professional Swivel Knife including polished standard blade, medium, ball-bearing finger rest, height adjustable, inkl. blade #2 - standard
1x Rickert - Ballpoint Stylus
1x Polyester Tracing Film DIN A4 (á 10 sheets)
1x Japanese- Leather Maul 380g
You are saving money compared to the individual purchase!
Info: "Rickert - Leatherworker's Finest" - tools from leather craftsmen for leather craftsmen. All tools of the series are made using traditional Japanese craft techniques. Only selected, high-quality and durable raw materials enter the production. The selected degrees of hardness of the steel are reflected in the precision, sharpness and quality of the respective tools. Each one of these products has been thoroughly tested for quality and durability and are only approved for sale after meeting our exacting standards.
Sergey Neskromniy Punziereisen / Prägewerkzeug No. 163B-LR-Set
€45.00*
Sergey Neskromniy Punziereisen / Prägewerkzeug / Lederstempel No. 163B-LR-Set
Diese Prägestempel werden bei Sergey Neskromniy in Bulgarien aus Messing und Werkzeugstahl hergestellt. Der außergewöhnliche Detailgrad und die saubere Ausarbeitung der Stempel zeichen diese Serie an Punziereisen aus.
Abmessungen: Breite: 5 mm, Länge: 18 mm
Breite: 5 mm, Länge: 18 mm
Zum Punzieren des Leders bitte die Oberfläche mit einem Schwamm und lauwarmen Wasser anfeuchten (Oberfläche muss saugfähig sein). Im Anschluss kann das Leder gefärbt werden. Unabhängig davon, ob das Leder gefärbt wird, empfehlen wir Ihnen abschliessend die Oberfläche mit unserem Leder - Pflege - Finish zu behandeln (Oberfläche wird schmutz- und wasserabweisend).
Hinweis: Um einen bestmöglichen Abdruck im Leder zu erhalten, empfehlen wir auf Grund der Größe des Prägestempels die Verwendung eines schweren Punzierhammers
( z.B. Rickert - Punzierhammer - heavy)
Sergey Neskromniy Punziereisen / Prägewerkzeug No. 163BB-LR-Set
€50.00*
Sergey Neskromniy Punziereisen / Prägewerkzeug / Lederstempel No. 163BB-LR-Set
Diese Prägestempel werden bei Sergey Neskromniy in Bulgarien aus Messing und Werkzeugstahl hergestellt. Der außergewöhnliche Detailgrad und die saubere Ausarbeitung der Stempel zeichen diese Serie an Punziereisen aus.
Abmessungen: Stempel 1: Breite: 6,5 mm, Länge: 23 mm
Stempel 2: Breite: 6,5 mm, Länge: 23 mm
Zum Punzieren des Leders bitte die Oberfläche mit einem Schwamm und lauwarmen Wasser anfeuchten (Oberfläche muss saugfähig sein). Im Anschluss kann das Leder gefärbt werden. Unabhängig davon, ob das Leder gefärbt wird, empfehlen wir Ihnen abschliessend die Oberfläche mit unserem Leder - Pflege - Finish zu behandeln (Oberfläche wird schmutz- und wasserabweisend).
Beim Kauf von einem Stück erhalten Sie den Stempel 1 & 2.
Hinweis: Um einen bestmöglichen Abdruck im Leder zu erhalten, empfehlen wir auf Grund der Größe des Prägestempels die Verwendung eines schweren Punzierhammers
( z.B. Rickert - Punzierhammer - heavy)
Sergey Neskromniy Punziereisen / Prägewerkzeug No. 209-Set
€50.00*
Sergey Neskromniy Punziereisen / Prägewerkzeug / Lederstempel No. 209-Set
Diese Prägestempel werden bei Sergey Neskromniy in Bulgarien aus Messing und Werkzeugstahl hergestellt. Der außergewöhnliche Detailgrad und die saubere Ausarbeitung der Stempel zeichen diese Serie an Punziereisen aus.
Abmessungen: Stempel 1: Breite: 10 mm, Länge: 9 mm
Stempel 2: Breite: 7 mm, Länge: 7 mm
Stempel 3: Breite: 4 mm, Länge: 7 mm
Zum Punzieren des Leders bitte die Oberfläche mit einem Schwamm und lauwarmen Wasser anfeuchten (Oberfläche muss saugfähig sein). Im Anschluss kann das Leder gefärbt werden. Unabhängig davon, ob das Leder gefärbt wird, empfehlen wir Ihnen abschliessend die Oberfläche mit unserem Leder - Pflege - Finish zu behandeln (Oberfläche wird schmutz- und wasserabweisend).
Beim Kauf von einem Stück erhalten Sie den Stempel 1,2 & 3.
Hinweis: Um einen bestmöglichen Abdruck im Leder zu erhalten, empfehlen wir auf Grund der Größe des Prägestempels die Verwendung eines schweren Punzierhammers
( z.B. Rickert - Punzierhammer - heavy)
Sergey Neskromniy stamping tool Baer Paw-Set
€70.00*
Sergey Neskromniy stamping tool Baer Paw-Set
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Dimensions: Stamp 1: Width: 9,5 mm, length: 11,7 mmStamp 2: Width: 10 mm, length: 17 mmStamp 3: Width: 9,5 mm, length: 11,7 mmStamp 4: Width: 10 mm, length: 17 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 4 stamps.
Sergey Neskromniy stamping tool Bicycle Chain Set
€40.00*
Sergey Neskromniy stamping tool Bicycle Chain Set
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Dimensions: Stamp 1: Width: 10 mm, length: 8 mmStamp 2: Width: 2 mm, length: 3 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 2 stamps.
Sergey Neskromniy stamping tool Chain Set
€25.00*
Sergey Neskromniy stamping tool Chain Set
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Dimensions: Stamp 1: Width: 10 mm, length: 7,4 mmStamp 2: Width: 8 mm, length: 2,4 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 2 stamps.
Sergey Neskromniy stamping tool No. 100-Set
From
€88.00*
Sergey Neskromniy stamping tool No. 100-Set
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron or stainless steel. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Note: Due to the size of the stamp, we recommend using a heavy Leather Maul to get the best possible impression in the leather (eg IV_3303-12, 1000 grams)
Dimensions: Stamp 1: Width: 10,6 mm, length: 10,9 mmStamp 2: Width: 5,3 mm, length: 10,9 mmStamp 3: Width: 5,3 mm, length: 10,9 mmStamp 4: Width: 23 mm, length: 17 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 4 stamps.
Sergey Neskromniy stamping tool No. 115-Set
€95.00*
Sergey Neskromniy stamping tool No. 115-Set
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Dimensions: Stamp 1: Width: 5,7 mm, length: 15 mmStamp 2: Width: 5,7 mm, length: 15 mmStamp 3: Width: 10,5 mm, length: 10,5 mmStamp 4: Width: 5,7 mm, length: 15 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 4 stamps.
Sergey Neskromniy stamping tool No. 121-Set
€39.00*
Sergey Neskromniy stamping tool No. 121-Set
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Note: Due to the size of the stamp, we recommend using a heavy Leather Maul to get the best possible impression in the leather (eg IV_3303-12, 1000 grams)
Dimensions: Stamp 1: Width: 7 mm, length: 9 mmStamp 2: Width: 20 mm, length: 20 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 2 stamps.
Sergey Neskromniy stamping tool No. 130-Set
€49.00*
Sergey Neskromniy stamping tool No. 130-Set
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Dimensions: Stamp 1: Width: 4,4 mm, length: 7 mmStamp 2: Width: 8 mm, length: 8 mmStamp 3: Width: 9,3 mm, length: 10,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 3 stamps.
Sergey Neskromniy stamping tool No. 131-Set
€49.00*
Sergey Neskromniy stamping tool No. 131-Set
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Dimensions: Stamp 1: Width: 4,3 mm, length: 7 mmStamp 2: Width: 7,4 mm, length: 8 mmStamp 3: Width: 9,3 mm, length: 10,3 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 3 stamps.
Sergey Neskromniy stamping tool No. 21-Set
From
€61.00*
Sergey Neskromniy stamping tool No. 21-Set
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron or stainless steel. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Dimensions: Stamp 1: Width: 3,4 mm, length: 6,7 mmStamp 2: Width: 7 mm, length: 6 mmStamp 3: Width: 10 mm, length: 8,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 3 stamps.
Sergey Neskromniy stamping tool No. 60-Set
€92.00*
Sergey Neskromniy stamping tool No. 60-Set
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Dimensions: Stamp 1: Width: 15 mm, length: 6 mmStamp 2: Width: 16 mm, length: 16 mmStamp 3: Width: 15 mm, length: 6 mmStamp 4: Width: 14 mm, length: 6 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 4 stamps.
Sergey Neskromniy stamping tool No. 62-Set
From
€143.00*
Sergey Neskromniy stamping tool No. 62-Set
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron or stainless steel. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Note: Due to the size of the stamp, we recommend using a heavy Leather Maul to get the best possible impression in the leather (eg IV_3303-12, 1000 grams)
Dimensions: Stamp 1: Width: 9,2 mm, length: 14,3 mmStamp 2: Width: 9,2 mm, length: 14,3 mmStamp 3: Width: 11 mm, length: 14,3 mmStamp 4: Width: 6 mm, length: 14,3 mmStamp 5: Width: 6 mm, length: 14,3 mmStamp 6: Width: 21,2 mm, length: 17 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 6 stamps.
Sergey Neskromniy stamping tool No. 66-Set
€69.00*
Sergey Neskromniy stamping tool No. 66-Set
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Dimensions: Stamp 1: Width: 15 mm, length: 4,5 mmStamp 2: Width: 17 mm, length: 7,5 mmStamp 3: Width: 17 mm, length: 17 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 3 stamps.
Sergey Neskromniy stamping tool No. 67-Set
From
€125.00*
Sergey Neskromniy stamping tool No. 67-Set (Snake Scale Set)
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron or stainless steel. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Note: Due to the size of the stamp, we recommend using a heavy Leather Maul to get the best possible impression in the leather (eg IV_3303-12, 1000 grams)
Dimensions: Stamp 1: Width: 8,4 mm, length: 9,3 mmStamp 2: Width: 8,4 mm, length: 9,3 mmStamp 3: Width: 9,3 mm, length: 9,3 mmStamp 4: Width: 5,9 mm, length: 9,3 mmStamp 5: Width: 5,9 mm, length: 9,3 mmStamp 6: Width: 14,6 mm, length: 21,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 6 stamps.
Sergey Neskromniy stamping tool No. 68-Set
From
€60.00*
Sergey Neskromniy stamping tool No. 68-Set
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron or stainless steel. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Dimensions: Stamp 1: Width: 6 mm, length: 3 mmStamp 2: Width: 7 mm, length: 6 mmStamp 3: Width: 10 mm, length: 8 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 3 stamps.
Sergey Neskromniy stamping tool No. 77-Set
€42.00*
Sergey Neskromniy stamping tool No. 77-Set
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Dimensions: Stamp 1: Width: 14 mm, length: 14 mmStamp 2: Width: 12 mm, length: 7 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 2 stamps.
Sergey Neskromniy stamping tool No. 83-Set
€51.00*
Sergey Neskromniy stamping tool No. 83-Set
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Dimensions: Stamp 1: Width: 13 mm, length: 6 mmStamp 2: Width: 8 mm, length: 6 mmStamp 3: Width: 8 mm, length: 6 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 3 stamps.
Sergey Neskromniy stamping tool No. 86-Set
From
€130.00*
Sergey Neskromniy stamping tool No. 86-Set (Dragon Scale)
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron or stainless steel. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Note: Due to the size of the stamp, we recommend using a heavy Leather Maul to get the best possible impression in the leather (eg IV_3303-12, 1000 grams)
Dimensions: Stamp 1: Width: 8 mm, length: 15 mmStamp 2: Width: 8 mm, length: 15 mmStamp 3: Width: 9 mm, length: 15 mmStamp 4: Width: 6 mm, length: 15 mmStamp 5: Width: 6 mm, length: 15 mmStamp 6: Width: 18 mm, length: 29,6 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 6 stamps.
Sergey Neskromniy stamping tool No. 88-Set
€82.00*
Sergey Neskromniy stamping tool No. 88-Set "Acorns & Oak Leaves"
These stamps are made by Sergey Neskromniy in Bulgaria from brass and iron. The exceptional level of detail and the clean design of the stamps characterize this series of stamping tools.
Note: Due to the size of the stamp, we recommend using a heavy Leather Maul to get the best possible impression in the leather (eg IV_3303-12, 1000 grams)
Dimensions: Stamp 1: Width: 10 mm, length: 5 mmStamp 2: Width: 14 mm, length: 14 mmStamp 3: Width: 23 mm, length: 12 mmStamp 4: Width: 23 mm, length: 12 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
When ordering 1 piece, you will receive a set of 4 stamps.
Stamp Set "Acronyms"
€46.95*
Stamp Set "Acronyms"
Set of 13 pcs. with one changeable handle - Height: 6.4 mm (1/4")
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamp Set "Clothing Sizes"
€49.95*
Stamp Set "Clothing Sizes"clothing sizes - set of 42 pcs. / height: 13 mm(34 numeric sizes, 7 unisex-sizes and an changeable handle)For
tooling please moisten the leather surface with a sponge and lukewarm
water (surface must be absorbent). Afterwards the leather can be dyed.
Regardless of whether the leather is dyed or not, we recommend to treat
the surface with our leather care finish finally (surface will be dirt
and water repellent).Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Barbed Wire" - Set ( II BWx-2 )
€24.95*
Stamping tool "Barbed Wire" - Set ( II BWx-2 )
Set containing 4 stamps.
1. 7,0 x 7,0 x 3,0 mm2. 9,0 x 3,0 mm3. 7,0 x 3,0 mm4. 9,0 x 3,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Celtic" - Set ( I CR )
€34.95*
Stamping tool "Celtic" - Set ( I CR )
Set containing 4 stamps.
1. 10,5 x 10,5 x 5,0 mm2. 16,0 x 5,0 mm3. 9,0 x 5,0 mm4. 23,5 x 5,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Chain Link" - Set (CL) ( T-19 )
€32.90*
Stamping tool "Chain Link" - Set (CL) ( T-19 )
Set containing 4 stamps.
1. 4,0 x 11,0 mm2. 4,0 x 21,0 mm3. 10,0 x 14,0 mm4. 8,0 x 28,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Circle Weave" - Set ( I CW )
€24.95*
Stamping tool "Circle Weave" - Set ( I CW )
Set containing 4 stamps.
1. 17,5 x 17,5 mm2. 15,0 x 15,0 mm3. 13,0 x 13,0 mm4. 10,5 x 10,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Diamond Wick" - Set ( II DWK )
€24.95*
Stamping tool "Diamond Wick" - Set ( II DWK )
Set containing 4 stamps.
1. 18,0 x 18,0 mm2. 16,0 x 16,0 mm3. 13,5 x 13,5 mm4. 11,5 x 11,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Diamond" - Set ( II G9011 )
€23.50*
Stamping tool "Diamond" - Set ( II G9011 )
Set containing 3 stamps.
1. 9,5 x 9,5 mm2. 7,0 x 7,0 mm3. 5,0 x 5,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Emoji" - Set
€44.95*
Stamping tool "Emoji" - Set
containing 25 pcs. 24 different stamps and 1 handle. Size of each stamp max. 14 x 13 mm.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Five" - Set ( II G9008 )
€23.50*
Stamping tool "Five" - Set ( II G9008 )
Set containing 3 stamps.
1. 9,5 x 9,5 mm2. 7,0 x 7,0 mm3. 5,0 x 5,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Floral" - Set
€47.00*
Stamping tool "Floral" - Setcontaining 13 pcs. 12 different stamps and 1 handle. Size of each stamp app. 17 mm.For
tooling please moisten the leather surface with a sponge and lukewarm
water (surface must be absorbent). Afterwards the leather can be dyed.
Regardless of whether the leather is dyed or not, we recommend to treat
the surface with our leather care finish finally (surface will be dirt
and water repellent).Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Geo Line" - Set (GL) ( S IV-17 )
€35.50*
Stamping tool "Geo Line" - Set (GL) ( S IV-17 )
Set containing 4 stamps.
1. 13,1 x 13,1 mm2. 14,1 x 14,1 mm3. 19,9 x 18,0 mm4. 15,0 x 10,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Geometric" - Set
€44.95*
Stamping tool "Geometric" - Set
containing 13 pcs. 12 different stamps and 1 handle. Size of each stamp max. 15,2 - 15,9 mm.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Hemp" - Set (HMP) ( S III - 17 )
€35.50*
Stamping tool "Hemp" - Set (HMP) ( S III - 17 )
Set containing 3 stamps.
1. 21,7 x 20,6 mm2. 17,7 x 17,0 mm3. 12,9 x 12,4 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Meander Cross" - Set (MC) ( T-17 )
€32.90*
Stamping tool "Meander Cross" - Set (MC) ( T-17 )
Set containing 3 stamps.
1. 9,0 x 12,0 mm2. 12,6 x 16,0 mm3. 16,9 x 19,6 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Meander, Ornament I" - Set ( II D9010 )
€23.50*
Stamping tool "Meander, Ornament I" - Set ( II D9010 )
Set containing 3 stamps.
1. 11,5 x 9,5 mm2. 10,5 x 8,5 mm3. 8,5 x 7,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Rope" - Set ( II Rx-2 )
€29.45*
Stamping tool "Rope" - Set ( II Rx-2 )
Set containing 4 stamps.
1. 17,0 x 17,0 x 4,0 mm2. 14,0 x 4,0 mm3. 8,5 x 4,0 mm4. 29,0 x 4,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Square Weave" - Set ( I SQW )
€24.95*
Stamping tool "Square Weave" - Set ( I SQW )
Set containing 4 stamps.
1. 16,5 x 16,5 mm2. 14,5 x 14,5 mm3. 12,5 x 12,5 mm4. 10,5 x 10,5 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Star" - Set ( II G9009 )
€23.50*
Stamping tool "Star" - Set ( II G9009 )
Set containing 3 stamps.
1. 9,5 x 9,5 mm2. 7,0 x 7,0 mm3. 5,0 x 5,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Steampunk" - Set (SPG) ( S IV-19 )
€39.90*
Stamping tool "Steampunk" - Set (SPG) ( S IV-19 )
Set containing 4 stamps.
1. 11,0 x 11,0 mm2. 17,0 x 17,0 mm3. 18,0 x 18,0 mm4. 25,0 x 25,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
Stamping tool "Tri. Weave" - Set ( I TW )
€24.95*
Stamping tool "Tri. Weave" - Set ( I TW )
Set containing 4 stamps.
1. 16,0 x 16,0 mm2. 14,0 x 14,0 mm3. 12,0 x 12,0 mm4. 10,0 x 10,0 mm
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.