Punzieraufsatz / Lederstempel "Anker" 27 x 30 mm
Zur Benutzung benötigen Sie zusätzlich (einmalig) einen Handgriff (Schlagstempel) und zur besseren Kraftverteilung empfehlen wir Ihnen einen Schlagaufsatz.
Zum Punzieren des Leders bitte die Oberfläche mit einem Schwamm und lauwarmen Wasser anfeuchten (Oberfläche muss saugfähig sein). Im Anschluss kann das Leder gefärbt werden. Unabhängig davon, ob das Leder gefärbt wird, empfehlen wir Ihnen abschliessend die Oberfläche mit unserem Leder - Pflege - Finish zu behandeln (Oberfläche wird schmutz- und wasserabweisend).
Bitte benutzen Sie zum Schlagen unbedingt einen geeigneten Hammer, um eine Beschädigung der Punziereisen / des Schlagstempel auszuschliessen. (keinen Metallhammer)
Der Schlagaufsatz und der Handgriff auf den Bildern sind nur exemplarisch und gehören nicht zum Lieferumfang. Bitte separat bestellen. - Vielen Dank.
Stamping Tool "Acoma Quall" 27 x 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Australian Flag" 14 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "British Flag" 14 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Broken Heart" 25 x 26 mmFor use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.For
tooling please moisten the leather surface with a sponge and lukewarm
water (surface must be absorbent). Afterwards the leather can be dyed.
Regardless of whether the leather is dyed or not, we recommend to treat
the surface with our leather care finish finally (surface will be dirt
and water repellent).Please use a suitable hammer to avoid damaging the stamping tool.
Stamping Tool "Bull's Eye" Ø 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Camp" 25 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Canada Flag" 26 x 15 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Concho" 28 x 19 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Cross (Lilly)" 25 x 30 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Dragon" 24 x 30 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Fatima Hand" 22 x 27 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Handcrafted by" 24 x 19 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Handcrafted" 20 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Heart" 23 x 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Infinity" 14,5 x 28,5 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Joy" Ø 23,5 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Large Foot Print (right)" 14 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Left Foot" 14 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Lips" 21 x 27 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Love Hands" 27 x 16 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Love" 25 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Love" Ø 23,5 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Mjolnir" 25 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Moon Face" Ø 28 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Peace" Ø 23 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Prop" 26 x 26 mmFor use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.For
tooling please moisten the leather surface with a sponge and lukewarm
water (surface must be absorbent). Afterwards the leather can be dyed.
Regardless of whether the leather is dyed or not, we recommend to treat
the surface with our leather care finish finally (surface will be dirt
and water repellent).Please use a suitable hammer to avoid damaging the stamping tool.The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Roped Edge Ribbon" 26 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Scope" Ø 23,6 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping tool "ships wheel" 24 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Smile" 26 x 26 mmFor use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.For
tooling please moisten the leather surface with a sponge and lukewarm
water (surface must be absorbent). Afterwards the leather can be dyed.
Regardless of whether the leather is dyed or not, we recommend to treat
the surface with our leather care finish finally (surface will be dirt
and water repellent).Please use a suitable hammer to avoid damaging the stamping tool.The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Spain Flag" 16 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Square Star" 25 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Texas" 25 x 23 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Thumbs Up" 24 x 22 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "U.S. Marine" 22 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "USA Flag" 27 x 20 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "USA Flag" 16 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Wind Peace" 29 x 21 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Wolf Track" 18 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
€6.50*
This website uses cookies to ensure the best experience possible. More information...
