Stamping Tool ".44 Cylinder" Ø 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Arrowhead" 27 x 19 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Buffalo Skull" 25 x 29 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Bull Rider" 27 x 17 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Crossed Lace" 28 x 20 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Dragon Shield" 24 x 27 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Feather" 29 x 8 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Hat" 28 x 20 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Horse & Rider" 29 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Indian Chief (left)" 26 x 23 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Indian Chief" 26 x 30 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Indian Head" 23 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Indian Skull" 24 x 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Kokopelli" 22 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Lizard" 28 x 22 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping tool "pistols" 24 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Rifles" 27 x 30 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Round Turtle" 26 x 19 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Saddle" 23 x 27 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Shell Clip" 22 x 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Sun Face" Ø 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Thunderbird" 22 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Woven Chevron" 29 x 17 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
€6.50*
This website uses cookies to ensure the best experience possible. More information...
