Stamping Tool "American Eagle" 28 x 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Punzieraufsatz / Lederstempel "Bullet Bottom" 26 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping tool "bullet" 24 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Celtic Wheel" 26 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Cross Chain" 27 x 13 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Cross Chain" Ø 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Cross Motorcycle" 27 x 21 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Double Ace Flame" 27 x 13 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Double Cross" Ø 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Eagle Chain" Ø 23 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Eagle Shield" 27 x 15 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "G Plate" 29 x 20 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Gear" 26 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Mjolnir" 25 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Motorcycle Wings" 23 x 23 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Peace Heart" 28 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Plate" 24 x 29 mmFor use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.For
tooling please moisten the leather surface with a sponge and lukewarm
water (surface must be absorbent). Afterwards the leather can be dyed.
Regardless of whether the leather is dyed or not, we recommend to treat
the surface with our leather care finish finally (surface will be dirt
and water repellent).Please use a suitable hammer to avoid damaging the stamping tool.
Stamping Tool "Prop" 26 x 26 mmFor use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.For
tooling please moisten the leather surface with a sponge and lukewarm
water (surface must be absorbent). Afterwards the leather can be dyed.
Regardless of whether the leather is dyed or not, we recommend to treat
the surface with our leather care finish finally (surface will be dirt
and water repellent).Please use a suitable hammer to avoid damaging the stamping tool.The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Sceleton Key" 8 x 27,5 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Skull & Crossbones" 27 x 20 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Skull & Crossbones" 27 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Skull & Crossbones" 26 x 22 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Skull & Snake" 29 x 23 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Skull Barbwire" 28 x 16 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Skull Cross Flame" 27 x 20 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Skull Cross" Ø 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Skull Motor Flame" 23 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Skull Shield" Ø 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Skull Spade" 23,5 x 28,5 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Skull Wings" 27 x 14 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Sprocket" 26 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Street Bike" 28 x 20 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Time" 26 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
€6.50*
This website uses cookies to ensure the best experience possible. More information...
