Stamping Tool "Attack Eagle (left)" 26 x 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Attack Eagle" 24 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Bear (right)" 28 x 17 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Bighorn" 27 x 19 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Buffalo (left)" 29 x 21 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Buffalo Head (right)" 23 x 27 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Buffalo Head" 22 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Bull" 27 x 18 mm
Zur Benutzung benötigen Sie zusätzlich (einmalig) einen Handgriff (Schlagstempel) und zur besseren Kraftverteilung empfehlen wir Ihnen einen Schlagaufsatz.
Zum Punzieren des Leders bitte die Oberfläche mit einem Schwamm und lauwarmen Wasser anfeuchten (Oberfläche muss saugfähig sein). Im Anschluss kann das Leder gefärbt werden. Unabhängig davon, ob das Leder gefärbt wird, empfehlen wir Ihnen abschliessend die Oberfläche mit unserem Leder - Pflege - Finish zu behandeln (Oberfläche wird schmutz- und wasserabweisend).
Bitte benutzen Sie zum Schlagen unbedingt einen geeigneten Hammer, um eine Beschädigung der Punziereisen / des Schlagstempel auszuschliessen. (keinen Metallhammer)
Der Schlagaufsatz und der Handgriff auf den Bildern sind nur exemplarisch und gehören nicht zum Lieferumfang. Bitte separat bestellen. - Vielen Dank.
Stamping Tool "Butterfly" 23 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Butterfly" 25 x 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Climbing Koala (right)" 20 x 27 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Climbing Koala" 27 x 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Crest" 26 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Deerhead (right)" 25 x 29 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Dolphin" 27 x 17 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Dragonfly" 25 x 27,5 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Eagle Head (left)" 23 x 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Eagle Head (right)" 24 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Eagle Left" 22 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Eagle Right" 22 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Eaglehead Right" 23 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Galah" 25 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Giraffe" 12 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Horse Head (left)" 30 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Horse Head (right)" 30 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Horse Head" 25 x 28 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Howling Coyote" 21 x 29 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Hunting Eagle" 20 x 27 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Kangaroo & Joey" 28 x 15 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Kangaroo" 29 x 23 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Koala & Baby" 22 x 28 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Kookaborra" 24 x 27 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Left Lion" 24 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Lion Head" 22 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Lion" 21 x 27 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Lioness (left)" 28 x 23 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Lioness Head (right)" 24 x 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Lionhead" 22 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Longhorn" 28 x 20 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Mare & Colt" 25 x 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Octopus" 25 x 25 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Owl (left)" 25 x 26 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Owl" 23,5 x 24,5 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Platyps" 27 x 19 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Possum" 25 x 27 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Rattlesnake (attack)" 28 x 21 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Rattlesnake" 26 x 22 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
Stamping Tool "Rhino Head" 26 x 24 mm
For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.
For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).
Please use a suitable hammer to avoid damaging the stamping tool.
The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.
€6.50*
This website uses cookies to ensure the best experience possible. More information...
