2-D, 3-D

Handle for 2D / 3D stamps

Handle for 2D / 3D stamps Handle-Ø: 12,8 mm / intake-Ø: 8,5 mm / total length: 95 mm Handle for 2D & 3D Stamps. In order to optimize the impact pattern and to achieve an even look of the imprint (especially with large stamps), we recommend a heavy duty ram foot. Please use a suitable hammer to avoid damaging the stamping tool. The stamp on the picture is only an example.

€6.95*

Heavy Duty Ram Foot

Heavy Duty Ram Foot Ø 25 mm / total length: 25,5 mm intake for all 2D & 3D - stamps. In order to optimize the impact pattern and to achieve an even look of the imprint (especially with large stamps), we recommend this handle. In addition, you need a handle / punch. Please use a suitable hammer to avoid damaging the stamping tool. The stamp on the picture is only an example.

€9.90*

Heavy-duty handle for 2D / 3D stamps

Heavy-duty handle for 2D / 3D stamps Handle-Ø: 22,0 mm / intake-Ø: 22,0 mm / total length: app. 128 mm This extremely heavy and massive handle can be used as an alternative to the Heavy Duty Ram Foot. Recording for all 2D & 3D - stamps. In order to optimize the impact pattern and to achieve an even look of the imprint (especially with large stamps), we recommend this handle. Please use a suitable hammer to avoid damaging the stamping tool. The stamp on the picture is only an example.

€23.50*

Punzieraufsatz / Lederstempel "Anker"

Punzieraufsatz / Lederstempel "Anker" 27 x 30 mm Zur Benutzung benötigen Sie zusätzlich (einmalig) einen Handgriff (Schlagstempel) und zur besseren Kraftverteilung empfehlen wir Ihnen einen Schlagaufsatz. Zum Punzieren des Leders bitte die Oberfläche mit einem Schwamm und lauwarmen Wasser anfeuchten (Oberfläche muss saugfähig sein). Im Anschluss kann das Leder gefärbt werden. Unabhängig davon, ob das Leder gefärbt wird, empfehlen wir Ihnen abschliessend die Oberfläche mit unserem Leder - Pflege - Finish zu behandeln (Oberfläche wird schmutz- und wasserabweisend). Bitte benutzen Sie zum Schlagen unbedingt einen geeigneten Hammer, um eine Beschädigung der Punziereisen / des Schlagstempel auszuschliessen. (keinen Metallhammer) Der Schlagaufsatz und der Handgriff auf den Bildern sind nur exemplarisch und gehören nicht zum Lieferumfang. Bitte separat bestellen. - Vielen Dank.

€6.50*

Replacement handle for small stamps

Replacement handle for small stamps from our sets. (e.g. native set or small letter and number sets) handle-Ø: 8,0 mm / intake-Ø: 4,5 mm / total length: 94 mm Not suitable for 3D - Stamps. Please use a suitable hammer to avoid damaging the stamping tool.

€4.95*

Stamping Tool ".44 Cylinder"

Stamping Tool ".44 Cylinder" Ø 24 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Acoma Quall"

Stamping Tool "Acoma Quall" 27 x 24 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "American Eagle"

Stamping Tool "American Eagle" 28 x 24 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Arrowhead"

Stamping Tool "Arrowhead" 27 x 19 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Attack Eagle (left)"

Stamping Tool "Attack Eagle (left)" 26 x 24 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Attack Eagle"

Stamping Tool "Attack Eagle" 24 x 26 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Australian Flag"

Stamping Tool "Australian Flag" 14 x 26 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Basketweave Corner "

Stamping Tool "Basketweave Corner " 24 x 24 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Bear (right)"

Stamping Tool "Bear (right)" 28 x 17 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Bighorn"

Stamping Tool "Bighorn" 27 x 19 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "British Flag"

Stamping Tool "British Flag" 14 x 26 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Broken Heart" 25 x 26 mm

Stamping Tool "Broken Heart" 25 x 26 mmFor use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot.For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent).Please use a suitable hammer to avoid damaging the stamping tool.

€6.50*

Stamping Tool "Buffalo (left)"

Stamping Tool "Buffalo (left)" 29 x 21 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Buffalo Head (right)"

Stamping Tool "Buffalo Head (right)" 23 x 27 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Buffalo Head"

Stamping Tool "Buffalo Head" 22 x 25 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Buffalo Skull"

Stamping Tool "Buffalo Skull" 25 x 29 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Bull Rider"

Stamping Tool "Bull Rider" 27 x 17 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Bull's Eye"

Stamping Tool "Bull's Eye" Ø 24 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Bull"

Stamping Tool "Bull" 27 x 18 mm Zur Benutzung benötigen Sie zusätzlich (einmalig) einen Handgriff (Schlagstempel) und zur besseren Kraftverteilung empfehlen wir Ihnen einen Schlagaufsatz. Zum Punzieren des Leders bitte die Oberfläche mit einem Schwamm und lauwarmen Wasser anfeuchten (Oberfläche muss saugfähig sein). Im Anschluss kann das Leder gefärbt werden. Unabhängig davon, ob das Leder gefärbt wird, empfehlen wir Ihnen abschliessend die Oberfläche mit unserem Leder - Pflege - Finish zu behandeln (Oberfläche wird schmutz- und wasserabweisend). Bitte benutzen Sie zum Schlagen unbedingt einen geeigneten Hammer, um eine Beschädigung der Punziereisen / des Schlagstempel auszuschliessen. (keinen Metallhammer) Der Schlagaufsatz und der Handgriff auf den Bildern sind nur exemplarisch und gehören nicht zum Lieferumfang. Bitte separat bestellen. - Vielen Dank.

€6.50*

Stamping Tool "Bullet Bottom"

Punzieraufsatz / Lederstempel "Bullet Bottom" 26 x 26 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping tool "bullet"

Stamping tool "bullet" 24 x 25 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Butterfly"

Stamping Tool "Butterfly" 23 x 25 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Butterfly"

Stamping Tool "Butterfly" 25 x 24 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Camp"

Stamping Tool "Camp" 25 x 25 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Canada Flag"

Stamping Tool "Canada Flag" 26 x 15 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Celtic Button"

Stamping Tool "Celtic Button" 26 x 26 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Celtic Knot"

Stamping Tool "Celtic Knot" 23 x 26 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Celtic Wheel"

Stamping Tool "Celtic Wheel" 26 x 26 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Climbing Koala (right)"

Stamping Tool "Climbing Koala (right)" 20 x 27 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Climbing Koala"

Stamping Tool "Climbing Koala" 27 x 24 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Concho (Celtic)"

Stamping Tool "Concho (Celtic)" Ø 25 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Concho"

Stamping Tool "Concho" 28 x 19 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Constantine Scroll"

Stamping Tool "Constantine Scroll" 26 x 26 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Corner"

Stamping Tool "Corner" 25 x 25 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Crest"

Stamping Tool "Crest" 26 x 26 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Cross (Lilly)"

Stamping Tool "Cross (Lilly)" 25 x 30 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Cross Chain"

Stamping Tool "Cross Chain" 27 x 13 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Cross Chain"

Stamping Tool "Cross Chain" Ø 25 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Cross Motorcycle"

Stamping Tool "Cross Motorcycle" 27 x 21 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Cross"

Stamping Tool "Cross" 27 x 25 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Cross"

Stamping Tool "Cross" 22 x 21 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Cross"

Stamping Tool "Cross" 20 x 25 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*

Stamping Tool "Crossed Blades"

Stamping Tool "Crossed Blades" 24 x 22 mm For use of this stamp, you need a stamp handle (once) and for a better distribution of the strike force, we recommend a ramfoot. For tooling please moisten the leather surface with a sponge and lukewarm water (surface must be absorbent). Afterwards the leather can be dyed. Regardless of whether the leather is dyed or not, we recommend to treat the surface with our leather care finish finally (surface will be dirt and water repellent). Please use a suitable hammer to avoid damaging the stamping tool. The ramfoot and the handle on the pictures are only examples and are not included. Please order separately. - Thanks you.

€6.50*