Snap Fastener

Osborne Snap - Set

Osborne push-button/snap set 6 silver-colored, simple push-buttons/snaps incl. setting tool. Please use our revolver punch or mini punch set to prepare the holes (3 / 4mm), our setting tool to insert the snaps. For insertion in up to 3 / 3.5 mm thick leather (or similar materials such as felt, fabric, etc.). Available options:- small: push-button/snap - Ø 12.5 mm (line 20) / neck - Ø 3.0 mm / max. 3 mm leather thickness- large: push-button/snap - Ø 15.0 mm (line 24) / neck - Ø 4.0 mm / max. 3.5 mm leather thickness

From €45.25*

Details

Osborne Snap Setting Tool

Osborne Snap Setting Tool Available options: - small: Line 20 (small snaps / Ø 12.5 mm) - big: Line 24 (big snaps / Ø 15,0 mm) Or you use our universal snap setting tool (suitable for both sizes). Please use our revolving punch or mini punch set to prepare the holes (3 / 4mm).

From €32.20*

Details

Osborne Snaps 10 pc. (brass)

Osborne push-button/snap 10 pcs. (ring spring, brass) 10 simple push-button/snaps with 12.5 or 15.0 mm head diameter. Each push-button consists of 4 parts.- Please use our revolver punch or mini punch set to prepare the holes (3 / 4mm), our setting tool to insert the snaps. Suitable for insertion in up to 3.0 / 3.5 mm thick leather (or similar materials such as felt, fabric, etc.). Available options:- small: push-button/snap - Ø 12.5 mm (line 20) / neck - Ø 3.0 mm / max. 3 mm leather thickness- large: push-button/snap - Ø 15.0 mm (line 24) / neck - Ø 4.0 mm / max. 3.5 mm leather thickness (See Fig. 5.) The items are composed as follows:# 1: Cap + Socket ("Cap" is the part of the push-button that should be visible from the outside)# 2: Stud + EyletOur manual setting tools consist of 2 parts, a punch and an anvil. The anvil has 2 distinctively different sides. The rounded surface is suitable for the "Cap", the area with the small elevation in the middle is suitable for the "Eylet" -If you now want to use the parts from # 1, punch the leather in the right place and push the "cap" through this hole. (The pin should be about 2-3 mm out of the leather, so in the course of a firm connection with the socket can be created.) Place the anvil with the round trough up on a solid surface and then position the leather with the inserted "Cap" in this round trough. Now place the "socket" on the pin facing you and place the baton on the pin. With one or two light hammer blows, the pen is now circulated and creates a tight connection.Proceed in the same way for the second pair of push-buttons (# 2), but now use the area with the small elevation in the middle of the anvil. Now you put the "Eylet" on the anvil pushed through the leather. Place the "Stud" over the eylet's pin and make as already described the connection with the help of the punch.

Content: 10 pieces (€0.85* / 1 pieces)

From €8.50*

Details

Osborne Snaps 10 pc. (Line 20 / Ø 12.5 mm)

10 simple push-buttons/snaps with 12.5 mm head diameter (ring spring). Each push-button/snap consists of 4 parts.- Please use our revolver punch or mini punch set to prepare the holes (3 / 4mm), our setting tool to insert the snaps. Suitable for insertion in up to 3 mm thick leather (or similar materials such as felt, fabric, etc.). Available options:- silver: push-button/snap - Ø 12.5 mm (line 20) / neck - Ø 3.0 mm / max. 3 mm leather thickness- gold: push-button/snap - Ø 12.5 mm (line 20) / neck - Ø 3.0 mm / max. 3 mm leather thickness- burnished: push-button/snap - Ø 12.5 mm (line 20) / neck - Ø 3.0 mm / max. 3 mm leather thickness- black: push-button/snap - Ø 12.5 mm (line 20) / neck - Ø 3.0 mm / max. 3 mm leather thickness General information about inserting push-buttons/snaps in conjunction with a push-button/snap setting tool: (See Fig. 5.) The items are composed as follows:# 1: Cap + Socket ("Cap" is the part of the push-button that should be visible from the outside)# 2: Stud + EyletOur manual setting tools consist of 2 parts, a punch and an anvil. The anvil has 2 distinctively different sides. The rounded surface is suitable for the "Cap", the area with the small elevation in the middle is suitable for the "Eylet" -If you now want to use the parts from # 1, punch the leather in the right place and push the "cap" through this hole. (The pin should be about 2-3 mm out of the leather, so in the course of a firm connection with the socket can be created.) Place the anvil with the round trough up on a solid surface and then position the leather with the inserted "Cap" in this round trough. Now place the "socket" on the pin facing you and place the baton on the pin. With one or two light hammer blows, the pen is now circulated and creates a tight connection.Proceed in the same way for the second pair of push-buttons (# 2), but now use the area with the small elevation in the middle of the anvil. Now you put the "Eylet" on the anvil pushed through the leather. Place the "Stud" over the eylet's pin and make as already described the connection with the help of the punch.

Content: 10 pieces (€0.52* / 1 pieces)

From €5.20*

Details

Osborne Snaps 10 pc. (Line 24 / Ø 15.0 mm)

10 simple push-buttons/snaps with 15.0 mm head diameter (ring spring). Each push-button/snap consists of 4 parts.- Please use our revolver punch or mini punch set to prepare the holes (3 / 4mm), our setting tool to insert the snaps. Suitable for insertion in up to 3.5 mm thick leather (or similar materials such as felt, fabric, etc.). Available options:- silver: push-button/snap - Ø 15.0 mm (line 24) / neck - Ø 4.0 mm / max. 3.5 mm leather thickness- gold: push-button/snap - Ø 15.0 mm (line 24) / neck - Ø 4.0 mm / max. 3.5 mm leather thickness- burnished: push-button/snap - Ø 15.0 mm (line 24) / neck - Ø 4.0 mm / max. 3.5 mm leather thickness- black: push-button/snap - Ø 15.0 mm (line 24) / neck - Ø 4.0 mm / max. 3.5 mm leather thickness General information about inserting push-buttons/snaps in conjunction with a push-button/snap setting tool: (See Fig. 5.) The items are composed as follows:# 1: Cap + Socket ("Cap" is the part of the push-button that should be visible from the outside)# 2: Stud + EyletOur manual setting tools consist of 2 parts, a punch and an anvil. The anvil has 2 distinctively different sides. The rounded surface is suitable for the "Cap", the area with the small elevation in the middle is suitable for the "Eylet" -If you now want to use the parts from # 1, punch the leather in the right place and push the "cap" through this hole. (The pin should be about 2-3 mm out of the leather, so in the course of a firm connection with the socket can be created.) Place the anvil with the round trough up on a solid surface and then position the leather with the inserted "Cap" in this round trough. Now place the "socket" on the pin facing you and place the baton on the pin. With one or two light hammer blows, the pen is now circulated and creates a tight connection.Proceed in the same way for the second pair of push-buttons (# 2), but now use the area with the small elevation in the middle of the anvil. Now you put the "Eylet" on the anvil pushed through the leather. Place the "Stud" over the eylet's pin and make as already described the connection with the help of the punch.

Content: 10 pieces (€0.55* / 1 pieces)

From €5.50*

Details

Osborne Snaps 10 pc. (nickel plated brass)

Osborne push-button/snap 10 pcs. (ring spring, nickel plated brass) 10 simple push-buttons/snaps with 12.5 or 15.0 mm head diameter. Each push-button/snap consists of 4 parts.- Please use our revolver punch or mini punch set to prepare the holes (3 / 4mm), our setting tool to insert the snaps. Suitable for insertion in up to 3.0 / 3.5 mm thick leather (or similar materials such as felt, fabric, etc.). Available options:- small: push-button/snap - Ø 12.5 mm (line 20) / neck - Ø 3.0 mm / max. 3 mm leather thickness- large: push-button/snap - Ø 15.0 mm (line 24) / neck - Ø 4.0 mm / max. 3.5 mm leather thickness General information about inserting push-buttons/snaps in conjunction with a push-button/snap setting tool: (See Fig. 5.) The items are composed as follows:# 1: Cap + Socket ("Cap" is the part of the push-button that should be visible from the outside)# 2: Stud + EyletOur manual setting tools consist of 2 parts, a punch and an anvil. The anvil has 2 distinctively different sides. The rounded surface is suitable for the "Cap", the area with the small elevation in the middle is suitable for the "Eylet" -If you now want to use the parts from # 1, punch the leather in the right place and push the "cap" through this hole. (The pin should be about 2-3 mm out of the leather, so in the course of a firm connection with the socket can be created.) Place the anvil with the round trough up on a solid surface and then position the leather with the inserted "Cap" in this round trough. Now place the "socket" on the pin facing you and place the baton on the pin. With one or two light hammer blows, the pen is now circulated and creates a tight connection.Proceed in the same way for the second pair of push-buttons (# 2), but now use the area with the small elevation in the middle of the anvil. Now you put the "Eylet" on the anvil pushed through the leather. Place the "Stud" over the eylet's pin and make as already described the connection with the help of the punch.

Content: 10 pieces (€0.77* / 1 pieces)

From €7.70*

Details

Osborne Snaps 10 pc. (XL silver)

Osborne push-button/snap 10 pcs. (ring spring, nickel plated brass) 10 simple push-buttons/snaps with 15.0 mm head diameter. Each push-button/snap consists of 4 parts.- Please use our revolver punch or mini punch set to prepare the holes (3 / 4mm), our setting tool to insert the snaps. Suitable for insertion in up to 8,00 mm thick leather (or similar materials such as felt, fabric, etc.). push-button/snap - Ø 15.0 mm (XL) / neck - Ø 3.0 mm / max. 8 mm leather thickness General information about inserting push-buttons/snaps in conjunction with a push-button/snap setting tool: (See Fig. 5.) The items are composed as follows:# 1: Cap + Socket ("Cap" is the part of the push-button that should be visible from the outside)# 2: Stud + EyletOur manual setting tools consist of 2 parts, a punch and an anvil. The anvil has 2 distinctively different sides. The rounded surface is suitable for the "Cap", the area with the small elevation in the middle is suitable for the "Eylet" -If you now want to use the parts from # 1, punch the leather in the right place and push the "cap" through this hole. (The pin should be about 2-3 mm out of the leather, so in the course of a firm connection with the socket can be created.) Place the anvil with the round trough up on a solid surface and then position the leather with the inserted "Cap" in this round trough. Now place the "socket" on the pin facing you and place the baton on the pin. With one or two light hammer blows, the pen is now circulated and creates a tight connection.Proceed in the same way for the second pair of push-buttons (# 2), but now use the area with the small elevation in the middle of the anvil. Now you put the "Eylet" on the anvil pushed through the leather. Place the "Stud" over the eylet's pin and make as already described the connection with the help of the punch.

Content: 10 pieces (€1.25* / 1 pieces)

€12.50*

Snap "Biker Cross"

Push-button/snap "Biker Cross" Ø 20 mm. (line 24) For insertion in up to 4 mm thick leather (or similar materials such as felt, fabric, etc.). Please use our revolver punch or mini punch set to prepare the holes (4mm). To insert the push-buttons our push-button - setting tool.

€3.80*

Snap "Bison"

Push-button/snap "Bison" Ø 20.8 mm. (line 24) For insertion in up to 4 mm thick leather (or similar materials such as felt, fabric, etc.). Please use our revolver punch or mini punch set to prepare the holes (4mm). To insert the push-buttons our push-button - setting tool.

€4.20*

Snap "Bullet Bottom"

Push-button/snap "Bullet Bottom" Ø 23.5 mm. (line 24) For insertion in up to 4 mm thick leather (or similar materials such as felt, fabric, etc.). Please use our revolver punch or mini punch set to prepare the holes (4mm). To insert the push-buttons our push-button - setting tool.

€4.60*

Snap "Celtic Knot"

Push-button/snap "Celtic Knot" 18.5 x 18.5 mm. (line 24) For insertion in up to 4 mm thick leather (or similar materials such as felt, fabric, etc.). Please use our revolver punch or mini punch set to prepare the holes (4mm). To insert the push-buttons our push-button - setting tool.

€3.80*

Snap "Cross"

Push-button/snap "Cross" Ø 20 mm. (line 24) For insertion in up to 4 mm thick leather (or similar materials such as felt, fabric, etc.). Please use our revolver punch or mini punch set to prepare the holes (4mm). To insert the push-buttons our push-button - setting tool.

€3.80*

Snap "Eagle"

Push-button/snap "Eagle" Ø 15 mm. (line 24) If you order 1 piece you will receive 10 push-buttons/snaps. For insertion in up to 4 mm thick leather (or similar materials such as felt, fabric, etc.). Please use our revolver punch or mini punch set to prepare the holes (4mm). To insert the push-buttons our push-button - setting tool.

Content: 10 pieces (€1.02* / 1 pieces)

€10.20*

Snap "Floral"

Push-button/snap "Floral" Ø 20 mm. (line 24) For insertion in up to 4 mm thick leather (or similar materials such as felt, fabric, etc.). Please use our revolver punch or mini punch set to prepare the holes (4mm). To insert the push-buttons our push-button - setting tool.

€3.80*

Snap "Lilly"

Push-button/snap "Lilly" 23.5 x 20.0 mm. (line 24) For insertion in up to 4 mm thick leather (or similar materials such as felt, fabric, etc.). Please use our revolver punch or mini punch set to prepare the holes (4mm). To insert the push-buttons our push-button - setting tool.

€3.80*

Snap "Peace"

Push-button/Snap "Peace" Ø 20 mm. (line 24) For insertion in up to 4 mm thick leather (or similar materials such as felt, fabric, etc.). Please use our revolver punch or mini punch set to prepare the holes (4mm). For inserting the push-button/snap our push button - setting tool.

€3.80*

Snap "Skull"

Push-button/Snap "Skull" (H / W) 25 x 17.5 mm. (line 24) For insertion in up to 4 mm thick leather (or similar materials such as felt, fabric, etc.). Please use our revolver punch or mini punch set to prepare the holes (4mm). For inserting the push-button/snap our push button - setting tool.

€4.20*

Snap "Star"

Push-button/snap "Star" Ø 15 mm. (line 24) If you order 1 piece you will receive 10 push-buttons/snaps. For insertion in up to 4 mm thick leather (or similar materials such as felt, fabric, etc.). Please use our revolver punch or mini punch set to prepare the holes (4mm). To insert the push-buttons our push-button - setting tool.

Content: 10 pieces (€1.50* / 1 pieces)

€15.00*

Snap Setter for Line 24 / Ø 15.0 mm

Snap setting tool Three-piece set for Line 24 / Ø 15.0 mm spring ring snap types. Easiest operation.

€14.20*

Snap, "Celtic Double Spiral" 10 pcs. (Line 24 / Ø 15,5 mm)

Color: Antique Silver

10 push buttons with Celtic pattern and 15.5 mm head diameter (ring spring, brass, nickel-free). Each push button consists of 4 parts .- For punching the holes in the leather, we recommend a revolving hole punch (various variants available), punch set or a round hole punch (3 - 4 mm) from our range. To insert the push buttons our setting tool. Suitable for insertion in up to 3.5 mm thick leather (or similar materials such as felt, fabric, etc.). Available options:- Antique silver- Antique brass- Antique copper(See Fig. 4) The items are composed as follows:# 1: Cap + Socket ("Cap" is the part of the push-button that should be visible from the outside)# 2: Stud + EyletOur manual setting tools consist of 2 parts, a punch and an anvil. The anvil has 2 distinctively different sides. The rounded surface is suitable for the "Cap", the area with the small elevation in the middle is suitable for the "Eylet" -If you now want to use the parts from # 1, punch the leather in the right place and push the "cap" through this hole. (The pin should be about 2-3 mm out of the leather, so in the course of a firm connection with the socket can be created.) Place the anvil with the round trough up on a solid surface and then position the leather with the inserted "Cap" in this round trough. Now place the "socket" on the pin facing you and place the baton on the pin. With one or two light hammer blows, the pen is now circulated and creates a tight connection.Proceed in the same way for the second pair of push-buttons (# 2), but now use the area with the small elevation in the middle of the anvil. Now you put the "Eylet" on the anvil pushed through the leather. Place the "Stud" over the eylet's pin and make as already described the connection with the help of the punch. Please note that the use of different display technologies and individual display settings can lead to distortions in the color representation.Therefore, the colors shown on your display may differ slightly from the actual color of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Content: 10 pieces (€1.70* / 1 pieces)

€16.95*

Snaps "Celtic Knotwork" 10 pc. (Line 24 / Ø 15.5 m

Color: Antique Silver

10 push buttons with Celtic pattern and 15.5 mm head diameter (ring spring, brass, nickel-free). Each push button consists of 4 parts .- For punching the holes in the leather, we recommend a revolving hole punch (various variants available), punch set or a round hole punch (3 - 4 mm) from our range. To insert the push buttons our setting tool. Suitable for insertion in up to 3.5 mm thick leather (or similar materials such as felt, fabric, etc.). Available options:- Antique silver- Antique brass- Antique copper (See Fig. 4) The items are composed as follows:# 1: Cap + Socket ("Cap" is the part of the push-button that should be visible from the outside)# 2: Stud + EyletOur manual setting tools consist of 2 parts, a punch and an anvil. The anvil has 2 distinctively different sides. The rounded surface is suitable for the "Cap", the area with the small elevation in the middle is suitable for the "Eylet" -If you now want to use the parts from # 1, punch the leather in the right place and push the "cap" through this hole. (The pin should be about 2-3 mm out of the leather, so in the course of a firm connection with the socket can be created.) Place the anvil with the round trough up on a solid surface and then position the leather with the inserted "Cap" in this round trough. Now place the "socket" on the pin facing you and place the baton on the pin. With one or two light hammer blows, the pen is now circulated and creates a tight connection.Proceed in the same way for the second pair of push-buttons (# 2), but now use the area with the small elevation in the middle of the anvil. Now you put the "Eylet" on the anvil pushed through the leather. Place the "Stud" over the eylet's pin and make as already described the connection with the help of the punch. Please note that the use of different display technologies and individual display settings can lead to distortions in the color representation.Therefore, the colors shown on your display may differ slightly from the actual color of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Content: 10 pieces (€1.60* / 1 pieces)

€15.95*

Snaps "Celtic Triskle" 10 pc. (Line 24 / Ø 15.5 mm

Color: Antique Silver

10 push buttons with Celtic pattern and 15.5 mm head diameter (ring spring, brass, nickel-free). Each push button consists of 4 parts .- For punching the holes in the leather, we recommend a revolving hole punch (various variants available), punch set or a round hole punch (3 - 4 mm) from our range. To insert the push buttons our setting tool. Suitable for insertion in up to 3.5 mm thick leather (or similar materials such as felt, fabric, etc.). Available options:- Antique silver- Antique brass- Antique copper (See Fig. 4) The items are composed as follows:# 1: Cap + Socket ("Cap" is the part of the push-button that should be visible from the outside)# 2: Stud + EyletOur manual setting tools consist of 2 parts, a punch and an anvil. The anvil has 2 distinctively different sides. The rounded surface is suitable for the "Cap", the area with the small elevation in the middle is suitable for the "Eylet" -If you now want to use the parts from # 1, punch the leather in the right place and push the "cap" through this hole. (The pin should be about 2-3 mm out of the leather, so in the course of a firm connection with the socket can be created.) Place the anvil with the round trough up on a solid surface and then position the leather with the inserted "Cap" in this round trough. Now place the "socket" on the pin facing you and place the baton on the pin. With one or two light hammer blows, the pen is now circulated and creates a tight connection.Proceed in the same way for the second pair of push-buttons (# 2), but now use the area with the small elevation in the middle of the anvil. Now you put the "Eylet" on the anvil pushed through the leather. Place the "Stud" over the eylet's pin and make as already described the connection with the help of the punch. Please note that the use of different display technologies and individual display settings can lead to distortions in the color representation.Therefore, the colors shown on your display may differ slightly from the actual color of the products shown on our product photos. If in doubt, we recommend viewing the product photos on another display or contacting us.

Content: 10 pieces (€1.66* / 1 pieces)

€16.60*

Universal – Setting Tool for Rivets and Snaps

Setting tool for all standard double cap rivets and pushbuttons (Line 20 and Line 24 / small & large) 6 - piece set consisting of an anvil with a straight and 4 concave faces (Ø 8.0 mm, 10.5 mm, 13.0 mm, 15.5 mm) for rivets and pushbuttons in all common sizes, as well as 5 punches for corresponding rivet or push-button tops. Please use a suitable hammer (not a steel hammer) to avoid damaging the tools.

€39.90*