Schleifen & Schärfen

Diamond Needle File flat stump 140 mm

Diamond Needle File flat stump 140 mm cross-section 5,5 x 1,5 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.

€19.00*

Diamond needle file knife-shaped 140 mm

Diamond needle file knife-shaped 140 mm cross-section 5 x 2 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.

€19.00*

Diamond needle file round shaped 140 mm

Diamond needle file round shaped 140 mm cross-section Ø 3,0 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.

€19.00*

Diamond needle file semicircular shape 140 mm

Diamond needle file semicircular shape 140 mm cross-section 5 x 2 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.

€19.00*

Diamond needle file square shaped 140 mm

Diamond needle file square shaped 140 mm cross-section 3 x 3 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.

€19.00*

Diamond needle file triangular shaped 140 mm

Diamond needle file triangular shaped 140 mm cross-section 4 x 4 mm / Diamond-covered length 70 mm / round shank Ø 3,0 mm Medium grain size for universal use.

€19.00*

Edge Sanding Stick

Edge Sanding Stick When sewing several pieces of leather together, often an offset of the edges is unavoidable. By using the sanding stick, you can easily prepare your leather edges for smoothing with an edge polisher or dyeing with an edge color. It can also be used to roughen the leather on splices. The edge sanding stick is equipped with a coarse and a fine grain and has a flexible synthetic material core. The abrasive layers lie on a foam layer to ensure a soft, non-rigid grinding process. Dimensions: Length: 178 mm Width: (26 mm, 16 mm) Height: 4 mm,Radius of the rounding on the short side: 8 mm When ordering 1 piece you will receive 2 edge sanding sticks.

Content: 2 pieces (€1.85* / 1 pieces)

€3.70*

Jeweler´s Rouge

Jeweler`s Rouge, 50 gr. in 5 different grits Please apply the jeweler's rouge to a piece of thin cardboard (e.g., photo cardboard), leather, or our strop board. It is not necessary to dilute these or to change their consistency. Simply take the piece of abrasive paste wrapped in paper out of the plastic tube and tear off a piece (about 1 cm) of the paper around it. Now pull the blade to be sharpened, at a uniform angle and moderate pressure over the applied jeweler's rouge. The result is a dark grinding abrasion. We recommend our sharpening tool for our swivel knife blades.Available options: - green (extra fine): suitable for a final high gloss polish. - white (fine): standard grit, suitable for polishing and resharpening between operations of knives and swivel knife blades. - red (medium): suitable for grinding slightly blunt knives and swivel knife blades. - brown (coarse): suitable for regular sanding and the removal of light scratches and rust marks from knives and swivel knife blades. - gray (extra coarse): suitable for coarse pre-sharpening of heavily rusted knives and swivel knife blades. When ordering 1 piece, you will receive 1 abrasive paste of the selected grit grade.

From €11.05*

Details

Nadelfeile Dreikant 140 mm

Nadelfeile Dreikant 140 mm Hieb 1 (grob) oder Hieb 3 (fein). Zur Metall-, Kunststoff- und Holzbearbeitung geeignet. Für kleine Arbeiten. Zur Reinigung der Nadelfeile empfehlen wir Ihnen unsere Feilenbürste. - Abrieb im Hieb der Nadelfeile bitte nicht ausklopfen: gehärteter Stahl > Bruchgefahr !

From €6.00*

Details

Nadelfeile flachstumpf 140 mm

Nadelfeile flachstumpf 140 mm Hieb 3 (fein). Zur Metall-, Kunststoff- und Holzbearbeitung geeignet. Für kleine Arbeiten. Zur Reinigung der Nadelfeile empfehlen wir Ihnen unsere Feilenbürste. - Abrieb im Hieb der Nadelfeile bitte nicht ausklopfen: gehärteter Stahl > Bruchgefahr !

€6.00*

Nadelfeile rund 140 mm

Nadelfeile rund 140 mm Hieb 1 (grob) oder Hieb 3 (fein). Zur Metall-, Kunststoff- und Holzbearbeitung geeignet. Für kleine Arbeiten. Zur Reinigung der Nadelfeile empfehlen wir Ihnen unsere Feilenbürste. - Abrieb im Hieb der Nadelfeile bitte nicht ausklopfen: gehärteter Stahl > Bruchgefahr !

€6.00*

Details

Nadelfeile Vierkant 140 mm

Nadelfeile Vierkant 140 mm Hieb 3 (fein). Zur Metall-, Kunststoff- und Holzbearbeitung geeignet. Für kleine Arbeiten. Zur Reinigung der Nadelfeile empfehlen wir Ihnen unsere Feilenbürste. - Abrieb im Hieb der Nadelfeile bitte nicht ausklopfen: gehärteter Stahl > Bruchgefahr !

€6.00*

Nadelfeile Vogelzunge 140 mm

Nadelfeile Vogelzunge 140 mm Hieb 3 (fein). Zur Metall-, Kunststoff- und Holzbearbeitung geeignet. Für kleine Arbeiten. Zur Reinigung der Nadelfeile empfehlen wir Ihnen unsere Feilenbürste. - Abrieb im Hieb der Nadelfeile bitte nicht ausklopfen: gehärteter Stahl > Bruchgefahr !

€6.00*

Details

Nagura artificial stone

For removing metal abrasion from stones 75 x 25 x 23 cm

€9.60*

Non-slip whetstone holder

For use with all the whetstones available in our range.Design: with chrome-plated guide rails, non-slip rubber jaws and a central rubber pad that prevents the whetstone from breaking through. For grindstones with lengths from 18 cm - 21,5 cm.

€39.15*

Strop Board

Strop Board for polishing and stropping of swivel knife blades, round knives or other sharp blades. The strop board is a good alternative to a sharpening stone from our range as it is quite easy to handle. Our strop board consists of a wooden handle with firmly applied leather strips on both sides. One side with full grain leather (smooth), one side with split leather (rough) for a fine and a coarser polish. Use: For the first time use, please apply our jeweler's rouge to the leather first. Make sure that the blade to be polished already has a good ground finish. The stropping is used to constantly sharpen and polish the blade (for example, before or after each use of the swivel knife). The difference is noticeable with each cut. Draw the knife evenly over the with jeweler's rouge treated leather with the back side first. Pay attention to an angle already given to the cutting edge (about 15° - 20°, see figures 3 and 4) Dimensions: Overall dimensions: L: 22.5 cm x W: 4.3 cm x H: 1.3 cm Leather stripes dimensions: L: 14.0 cm x W: 4.0 cm x H: 0.2 cm

€15.90*

Tsuboman Atoma diamond whetstone grit 1200

Tsuboman Atoma diamond whetstone grit 1200For dressing whetstones and cutting edges with one-sided chamfers (knife, plane, chisel, splitting machine blade, etc.)Important: Never use diamond whetstones dry. Use water to wet the grinding surface.Advantages of our diamond sharpening stones: - Can be used for dressing our Japanese water grindstones. - High and fast stock removal. - Grind out embrasures or change the bevel angle of cutting edges. - The flat surface is preserved. The diamond sharpening stone does not grind itself hollow. - Possibility to grind HSS, HM and PM steels.

€137.45*

Tsuboman Atoma diamond whetstone grit 400

Tsuboman Atoma diamond whetstone grit 400For dressing whetstones and cutting edges with one-sided chamfers (knife, plane, chisel, splitting machine blade, etc.)Important: Never use diamond whetstones dry. Use water to wet the grinding surface.Advantages of our diamond sharpening stones: - Can be used for dressing our Japanese water grindstones. - High and fast stock removal. - Grind out embrasures or change the bevel angle of cutting edges. - The flat surface is preserved. The diamond sharpening stone does not grind itself hollow. - Possibility to grind HSS, HM and PM steels.

€137.45*

Werkstattfeile flachstumpf 200 mm DHieb 3

Werkstattfeile flachstumpf 200 mm Deutscher Hieb 3. Zur Metall-, Kunststoff- und Holzbearbeitung geeignet. Feiner Hieb. Lieferung inkl. Feilenheft aus Buche mit Metallzwinge. Zur Reinigung der Feile empfehlen wir Ihnen unsere Feilenbürste. - Abrieb im Hieb der Feile bitte nicht ausklopfen: gehärteter Stahl > Bruchgefahr !

€6.00*

Whetstone Ohishi Toishi 1000/6000

Japanese combination water grindstone "Ohishi Toishi" with grain 1000/6000 Synthetically produced grindstone with open-pore structure for optimum sharpening performance. If necessary, you can sand the grindstone with wet sandpaper on a glass plate. Before use, you should water the whetstone for approx. 10 - 15 minutes. Dimensions (L / W / H) 205 x 75 x 30 mm

€65.00*

Whetstone Ohishi Toishi 220

Japanese water grindstone "Ohishi Toishi" with grain 220. Synthetically produced grindstone with open-pore structure for optimum sharpening performance. If necessary, you can sand the grindstone with wet sandpaper on a glass plate. Before use, you should water the whetstone for approx. 10 - 15 minutes. Dimensions (L / W / H) 205 x 80 x 35 mm

€42.00*

Whetstone Ohishi Toishi 600

Japanese water grindstone "Ohishi Toishi" with grain 600. Synthetically produced grindstone with open-pore structure for optimum sharpening performance. If necessary, you can sand the grindstone with wet sandpaper on a glass plate. Before use, you should water the whetstone for approx. 10 - 15 minutes. Dimensions (L / W / H) 205 x 75 x 25 mm.

€43.10*

Whetstone Ohishi Toishi 6000

Japanese water grindstone "Ohishi Toishi" with grain 6000. Synthetically produced grindstone with open-pore structure for optimum sharpening performance. If necessary, you can sand the grindstone with wet sandpaper on a glass plate. Before use, you should water the whetstone for approx. 10 - 15 minutes. Dimensions (L / W / H) 205 x 75 x 25 mm

€68.10*

Whetstone Ohishi Toishi 8000

Japanese water grindstone "Ohishi Toishi" with grain 8000. Synthetically produced grindstone with open-pore structure for optimum sharpening performance. If necessary, you can sand the grindstone with wet sandpaper on a glass plate. Before use, you should water the whetstone for approx. 10 - 15 minutes. Dimensions (L / W / H) 205 x 75 x 25 mm

€84.00*