Diamond Chisel Set

Product information "Diamond Chisel Set"

Diamond chisel set (11 pieces).

Tool for punching holes and subsequent braiding / sewing. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.

Be sure to avoid canting on impact (always strike it vertically with a hammer) to prevent breakage.

The set includes:

- Handle

- one prong punch

- two prong punch (2,3 mm)
- four prong punch (2,3 mm)
- six prong punch (2,3 mm)

- two prong punch (3,1 mm)
- four prong punch (3,1 mm)
- six prong punch (3,1 mm)

- two prong punch (3,9 mm)
- four prong punch (3,9 mm)
- six prong punch (3,9 mm)

 

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessory Items

Osborne Poly Hammer No.496
Osborne Poly Hammer No.496
Osborne Poly Hammer no. 496 with hardwood handle. For use with tooling stamps, hole punches, braiding irons, etc. (straight face). Little kickback due to impact absorbing poly hammer head. 240 gm total weight / head - Ø 45 mm / total length 295 mm

€26.90*
Rawhide Maul
Rawhide Maul
Buffalo Rawhide Maul rawhide with hardwood handle. With ergonomic weight distribution, thus low fatigue and excellent impact pattern. For use with tooling stamps, hole punches, braiding irons, etc. (round face). No kickback due to impact absorbing hammer head. - Professional version. Available options:# 02: Overall length: 240 mm / total weight: 1250 gm / head Ø: 75 mm When ordering 1 piece you will receive 1 rawhide maul of the selected size.

€134.50*
Cutting Board
Cutting Board
Schneidbrett / Werkplatte / Arbeitsunterlage aus hochfestem Kunststoff, mit wabenartiger Oberfläche. Bestens geeignet als Unterlage zum Schneiden, Hobeln, Punzieren, etc. von Leder. (L/B/H) 300 x 300 x 12 mm

€20.95*
Rickert - punching pad / cutting board
Rickert - punching pad / cutting board
Professional punching pad made of special synthetic fibers Hard base for punching or cutting leather. Hole and punching tools can penetrate well into the material, so the material to be punched is pierced cleanly. The remaining holes in the pad after the punching process leave only minor faults. The surface is thus easily usable even after many holes. After the work, the holes can be completely smoothed again with a roller. Tip: These pads are perfect for use with our pricking Irons, braiding Iron and multiple prong irons. Available in 3 different sizes. Available options:- 10 cm x 15 cm (thickness 2 cm)- 15 cm x 20 cm (thickness 3 cm)- 20 cm x 30 cm (thickness 3 cm) When ordering 1 piece you will receive 1 pad of the selected size.

From €9.95*
Cutting Mat
Cutting Mat
Cutting mat / work pad in 3 different sizes. High-quality cutting mat for precise and non-marking cuts. 3 - layer sandwich construction with hard core. One side is black, the other side is green. Printed on both sides with 10 and 50 mm pitch, as well as a fine grid. Professional version. Available options:small: length 450 mm / width: 300 mm / thickness: 3 mmlarge: Length: 600 mm / width: 450 mm / thickness: 3 mmextra large: length: 900 mm / width: 600 mm / thickness: 3 mm

From €13.95*
Raw Hide Hammer
Raw Hide Hammer
Rawhide hammer made of water buffalo raw hide with oak handle available in 3 different sizes. For kickback-free punching of hole punches, tooling stamps, etc. Pick list:# 1 Total weight: 295 grams / head - Ø: 48 mm / total length: 230 mm# 2 Total weight: 250 grams / head - Ø: 42 mm / total length: 290 mm# 3 Total weight: 170 grams / head - Ø: 37 mm / total length: 260 mm - When ordering 1 piece you will receive 1 raw hide hammer of the chosen size.

From €22.10*

Ähnliche Artikel

Rickert - punching pad / cutting board
Rickert - punching pad / cutting board
Professional punching pad made of special synthetic fibers Hard base for punching or cutting leather. Hole and punching tools can penetrate well into the material, so the material to be punched is pierced cleanly. The remaining holes in the pad after the punching process leave only minor faults. The surface is thus easily usable even after many holes. After the work, the holes can be completely smoothed again with a roller. Tip: These pads are perfect for use with our pricking Irons, braiding Iron and multiple prong irons. Available in 3 different sizes. Available options:- 10 cm x 15 cm (thickness 2 cm)- 15 cm x 20 cm (thickness 3 cm)- 20 cm x 30 cm (thickness 3 cm) When ordering 1 piece you will receive 1 pad of the selected size.

From €9.95*
Shopbewertung - rickert-werkzeug.de