Braiding Iron Ø 1 mm

Product information "Braiding Iron Ø 1 mm"

Braiding iron (round)

Punches round holes of Ø 1 mm.

Tool for punching (row) holes for subsequent braiding / sewing. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to avoid damaging the tool, see accessories.

Be sure to avoid canting on impact (always hit it vertically with a hammer) to prevent breakage.

Available options:

- One hole punch (Ø 1 mm)

- Two hole punch (Ø 1 mm / distance between the holes 4 mm)
- Four hole punch (Ø 1 mm / distance between the holes 4 mm)
- Six hole punch (Ø 1 mm / distance between the holes 4 mm)

- Two hole punch (Ø 1 mm / distance between the holes 5 mm)
- Four hole punch (Ø 1 mm / distance between the holes 5 mm)
- Six hole punch (Ø 1 mm / distance between the holes 5 mm)

- Two hole punch (Ø 1 mm / distance between the holes 6 mm)
- Four hole punch (Ø 1 mm / distance between the holes 6 mm)
- Six hole punch (Ø 1 mm / distance between the holes 6 mm)

When ordering 1 piece you will receive 1 braiding iron Ø 1 mm of the selected design.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessory Items

Rickert - punching pad / cutting board

Professional punching pad made of special synthetic fibers Hard base for punching or cutting leather. Hole and punching tools can penetrate well into the material, so the material to be punched is pierced cleanly. The remaining holes in the pad after the punching process leave only minor faults. The surface is thus easily usable even after many holes. After the work, the holes can be completely smoothed again with a roller. Tip: These pads are perfect for use with our pricking Irons, braiding Iron and multiple prong irons. Available in 3 different sizes. Available options:- 10 cm x 15 cm (thickness 2 cm)- 15 cm x 20 cm (thickness 3 cm)- 20 cm x 30 cm (thickness 3 cm) When ordering 1 piece you will receive 1 pad of the selected size.

From €9.95*

Details

Cutting Mat

Cutting mat / work pad in 3 different sizes. High-quality cutting mat for precise and non-marking cuts. 3 - layer sandwich construction with hard core. One side is black, the other side is green. Printed on both sides with 10 and 50 mm pitch, as well as a fine grid. Professional version. Available options:small: length 450 mm / width: 300 mm / thickness: 3 mmlarge: Length: 600 mm / width: 450 mm / thickness: 3 mmextra large: length: 900 mm / width: 600 mm / thickness: 3 mm

From €13.95*

Details

Raw Hide Hammer

Rawhide hammer made of water buffalo raw hide with oak handle available in 3 different sizes. For kickback-free punching of hole punches, tooling stamps, etc. Pick list:# 1 Total weight: 295 grams / head - Ø: 48 mm / total length: 230 mm# 2 Total weight: 250 grams / head - Ø: 42 mm / total length: 290 mm# 3 Total weight: 170 grams / head - Ø: 37 mm / total length: 260 mm - When ordering 1 piece you will receive 1 raw hide hammer of the chosen size.

From €24.90*

Details

Osborne Poly Hammer No.496

Osborne Poly Hammer no. 496 with hardwood handle. For use with tooling stamps, hole punches, braiding irons, etc. (straight face). Little kickback due to impact absorbing poly hammer head. 240 gm total weight / head - Ø 45 mm / total length 295 mm

€26.90*

Rawhide Maul

Buffalo Rawhide Maul rawhide with hardwood handle. With ergonomic weight distribution, thus low fatigue and excellent impact pattern. For use with tooling stamps, hole punches, braiding irons, etc. (round face). No kickback due to impact absorbing hammer head. - Professional version. Available options:# 02: Overall length: 240 mm / total weight: 1250 gm / head Ø: 75 mm When ordering 1 piece you will receive 1 rawhide maul of the selected size.

€179.00*

Ähnliche Artikel

Detail - Locheisen (0,5 mm)

Detail - PunchPunch - round cross-section with Ø 0,5 mm.Tool for punching very fine holes. Due to the small wall thickness of the punch, a very precise punching is possible. Please use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to prevent damage to the tool, see accessories.Please make sure to avoid tilting when hitting (always hit it vertically with the hammer) to prevent breakage.

€15.10*

Detail - Locheisen (Nadel)

Detail - PunchPunch - round cross-section with Ø 0.3 mm.Tool for punching very fine holes or for marking seam lines on leather. This punch works similar to an awl, no material is punched out but displaced.Please be sure to use a suitable hammer (not a steel hammer) and a suitable base (work plate, cutting mat) to prevent damage to the tool, see accessories.Please make sure that the tool is not tilted when hitting (always hit it vertically with the hammer) to prevent breakage.

€16.20*

Rickert - punching pad / cutting board

From €9.95*

Details